Thread revival...FF outta business? If so, who's a good seller to use? I saw some Musk this weekend, not sure if it was product quality or install quality but there were gaps and more buckling than I cared for...I'm doing this simply for looks, not drifting, so I'm trying to retain a factory panels fitment and then installing some rubber gasket to complete the factory-installed look.
https://rover.ebay.com/rover/0/0/0?m...2F272816773760
Last edited by m5james; 11-19-2018 at 11:32 PM.
650hp 10 X5///M5
PERFORMANCE:JB4 w/ meth, stage 2 tune, wrapped downpipes, custom intake
INTERIOR:AVIN 10.25" screen, Blackvue 550 dashcam, 7" tablet for JB4 logging
EXTERIOR:Niche staggered 20's or AC Forged staggered 22's, H&R 2" suspension, LED AE, CF front splitter
325hp 98 BMW 740iL6
PERFORMANCE:///M5 6spd swap, iron sleeves, L/W Teflon coated & silicone impregnated pistons, Sealed Power rings, 3 angle valvejob, P&P head, perf cams, electric fan, CF intake tube w/aluminium heatshield/wrapped MAF tubing, Magnaflow 14816'd, Eaton M112 in-work
INTERIOR:Android Dynavin, hardwired V1 above rearview, 12" RE Audio DVC sub, MTX 81000D monoblock, CF silver trim, 5% tint
EXTERIOR:///MPar staggered 19's, H&R Stage 2/Bilstein HD, custom notched bumper, Shadowline trim, 750iL brakes w/ Axxis pads
190hp 97 328ci
PERFORMANCE:Single mass flywheel, ///M3 clutch
EXTERIOR:Z4///M staggered 18's, rolled fenders, tinted markers
Look at cody's thread- he's super low and sick looking, with nice overs. I'm blanking on the brand, but he's the guy to talk to about it
Keep it simple: half gutted '01 330i, welded diff, BC coils, SLR Super kit
He was supposedly gonna do E46 fenders too but last time he logged in was over 3 years ago - my guess is he got bored and moved on just like everyone else. People only jump on the bandwagon for a few years and then they disappear. Whatever. C'est la vie.
Thanks, guys...I wrote Cliq, just waiting for pricing on vert/coupe fenders since they only have sedan listed on eBay. I saw someone locally with Musk and I wasn't impressed but I understand they can be adjusted a bit for more stretch, which in turn means more buckling along the top edge which this car had.
650hp 10 X5///M5
PERFORMANCE:JB4 w/ meth, stage 2 tune, wrapped downpipes, custom intake
INTERIOR:AVIN 10.25" screen, Blackvue 550 dashcam, 7" tablet for JB4 logging
EXTERIOR:Niche staggered 20's or AC Forged staggered 22's, H&R 2" suspension, LED AE, CF front splitter
325hp 98 BMW 740iL6
PERFORMANCE:///M5 6spd swap, iron sleeves, L/W Teflon coated & silicone impregnated pistons, Sealed Power rings, 3 angle valvejob, P&P head, perf cams, electric fan, CF intake tube w/aluminium heatshield/wrapped MAF tubing, Magnaflow 14816'd, Eaton M112 in-work
INTERIOR:Android Dynavin, hardwired V1 above rearview, 12" RE Audio DVC sub, MTX 81000D monoblock, CF silver trim, 5% tint
EXTERIOR:///MPar staggered 19's, H&R Stage 2/Bilstein HD, custom notched bumper, Shadowline trim, 750iL brakes w/ Axxis pads
190hp 97 328ci
PERFORMANCE:Single mass flywheel, ///M3 clutch
EXTERIOR:Z4///M staggered 18's, rolled fenders, tinted markers
Hard Motorsport have some over fenders now. I have not seen any pics of cars with them installed, but if they fit as well as their flares, they should be great. And they're having a 20% off Black Friday deal.
http://www.hardmotorsport.com/hard-m...bmw-e36-coupe/
I have FF overfenders and hard motorsports flares for E36 coupe if someone wants them. Not really interested in shipping the FF so those would have to be picked up in Plainfield, il.
Sent from my SM-G950U1 using Tapatalk
650hp 10 X5///M5
PERFORMANCE:JB4 w/ meth, stage 2 tune, wrapped downpipes, custom intake
INTERIOR:AVIN 10.25" screen, Blackvue 550 dashcam, 7" tablet for JB4 logging
EXTERIOR:Niche staggered 20's or AC Forged staggered 22's, H&R 2" suspension, LED AE, CF front splitter
325hp 98 BMW 740iL6
PERFORMANCE:///M5 6spd swap, iron sleeves, L/W Teflon coated & silicone impregnated pistons, Sealed Power rings, 3 angle valvejob, P&P head, perf cams, electric fan, CF intake tube w/aluminium heatshield/wrapped MAF tubing, Magnaflow 14816'd, Eaton M112 in-work
INTERIOR:Android Dynavin, hardwired V1 above rearview, 12" RE Audio DVC sub, MTX 81000D monoblock, CF silver trim, 5% tint
EXTERIOR:///MPar staggered 19's, H&R Stage 2/Bilstein HD, custom notched bumper, Shadowline trim, 750iL brakes w/ Axxis pads
190hp 97 328ci
PERFORMANCE:Single mass flywheel, ///M3 clutch
EXTERIOR:Z4///M staggered 18's, rolled fenders, tinted markers
Honestly I don't know dude's screen name on forums, I found him via one of the local PNW BMW Facebook pages, maybe E36 pages, etc...I don't recall. Either way I'd hit him up for Tein colovers and then saw his car in person. Don't get me wrong, it looked nice overall but the fitment wasn't what I'd accept. I've read that they're somewhat adjustable for how much flare they have in that someone can pull it out a little more at the wheel itself, but being fiberglass means it's fairly rigid so it'll buckle and that's what his car had because I'm guessing he had to make them work w/ his wheel+tire setup. I myself would rather go for perfect , factory flush fitment of the arches and then move the wheels out via spacers until they're flush.
There's a guy Emilio I know who's got a set for an E46 that he's looking to sell, I'll link him to this page and hopefully he's a member on here and you guys can link up.
650hp 10 X5///M5
PERFORMANCE:JB4 w/ meth, stage 2 tune, wrapped downpipes, custom intake
INTERIOR:AVIN 10.25" screen, Blackvue 550 dashcam, 7" tablet for JB4 logging
EXTERIOR:Niche staggered 20's or AC Forged staggered 22's, H&R 2" suspension, LED AE, CF front splitter
325hp 98 BMW 740iL6
PERFORMANCE:///M5 6spd swap, iron sleeves, L/W Teflon coated & silicone impregnated pistons, Sealed Power rings, 3 angle valvejob, P&P head, perf cams, electric fan, CF intake tube w/aluminium heatshield/wrapped MAF tubing, Magnaflow 14816'd, Eaton M112 in-work
INTERIOR:Android Dynavin, hardwired V1 above rearview, 12" RE Audio DVC sub, MTX 81000D monoblock, CF silver trim, 5% tint
EXTERIOR:///MPar staggered 19's, H&R Stage 2/Bilstein HD, custom notched bumper, Shadowline trim, 750iL brakes w/ Axxis pads
190hp 97 328ci
PERFORMANCE:Single mass flywheel, ///M3 clutch
EXTERIOR:Z4///M staggered 18's, rolled fenders, tinted markers
I can't stand when retails try to pull shady shit. Goto their website, says $495 and shows a 6-piece front and rear kit in their image. Scroll down a little lower and you see it's only a rear kit, click the full kit, image stays exactly the same, but you have to scroll up to the top to see the revised $995 price. Shit like this where they're trying to catch customers with a gotcha makes me avoid places like that.
I'm not seeing a 20% but I'm guessing it's gone seeing as today is Saturday.
On a side note, their rears are only 30mm...seems the standard is a minimum of 45mm.
Last edited by m5james; 11-24-2018 at 02:25 PM.
650hp 10 X5///M5
PERFORMANCE:JB4 w/ meth, stage 2 tune, wrapped downpipes, custom intake
INTERIOR:AVIN 10.25" screen, Blackvue 550 dashcam, 7" tablet for JB4 logging
EXTERIOR:Niche staggered 20's or AC Forged staggered 22's, H&R 2" suspension, LED AE, CF front splitter
325hp 98 BMW 740iL6
PERFORMANCE:///M5 6spd swap, iron sleeves, L/W Teflon coated & silicone impregnated pistons, Sealed Power rings, 3 angle valvejob, P&P head, perf cams, electric fan, CF intake tube w/aluminium heatshield/wrapped MAF tubing, Magnaflow 14816'd, Eaton M112 in-work
INTERIOR:Android Dynavin, hardwired V1 above rearview, 12" RE Audio DVC sub, MTX 81000D monoblock, CF silver trim, 5% tint
EXTERIOR:///MPar staggered 19's, H&R Stage 2/Bilstein HD, custom notched bumper, Shadowline trim, 750iL brakes w/ Axxis pads
190hp 97 328ci
PERFORMANCE:Single mass flywheel, ///M3 clutch
EXTERIOR:Z4///M staggered 18's, rolled fenders, tinted markers
PM sent
You have it setup to not accept PM's, we both tried.
650hp 10 X5///M5
PERFORMANCE:JB4 w/ meth, stage 2 tune, wrapped downpipes, custom intake
INTERIOR:AVIN 10.25" screen, Blackvue 550 dashcam, 7" tablet for JB4 logging
EXTERIOR:Niche staggered 20's or AC Forged staggered 22's, H&R 2" suspension, LED AE, CF front splitter
325hp 98 BMW 740iL6
PERFORMANCE:///M5 6spd swap, iron sleeves, L/W Teflon coated & silicone impregnated pistons, Sealed Power rings, 3 angle valvejob, P&P head, perf cams, electric fan, CF intake tube w/aluminium heatshield/wrapped MAF tubing, Magnaflow 14816'd, Eaton M112 in-work
INTERIOR:Android Dynavin, hardwired V1 above rearview, 12" RE Audio DVC sub, MTX 81000D monoblock, CF silver trim, 5% tint
EXTERIOR:///MPar staggered 19's, H&R Stage 2/Bilstein HD, custom notched bumper, Shadowline trim, 750iL brakes w/ Axxis pads
190hp 97 328ci
PERFORMANCE:Single mass flywheel, ///M3 clutch
EXTERIOR:Z4///M staggered 18's, rolled fenders, tinted markers
I turned it on when I PM’d him.
I can read...but I can also see images and I'm sure they new exactly what they're doing when the images hardly change but the price doubles.
Choose front fender flares...image shows $485 and two front fender flare pieces
Choose rear fender flares - image shows $495 and doesn't show one piece but instead a six piece kit
Choose full kit - image shows $950 and STILL shows a six piece kit.
Dick more to show a price with 6-piece fender flare pics then have it only be 2-pieces based on a check box...gotcha. I'm sure you'd be WTF if someone showed a bunch of complete M3 with pics, you get excited when you see a price that seems like a great deal, then you see it's just a 318 being parted out...but you can buy more shit and make it an M3 for 2x as much. If someone's OK with that, that's on them.
650hp 10 X5///M5
PERFORMANCE:JB4 w/ meth, stage 2 tune, wrapped downpipes, custom intake
INTERIOR:AVIN 10.25" screen, Blackvue 550 dashcam, 7" tablet for JB4 logging
EXTERIOR:Niche staggered 20's or AC Forged staggered 22's, H&R 2" suspension, LED AE, CF front splitter
325hp 98 BMW 740iL6
PERFORMANCE:///M5 6spd swap, iron sleeves, L/W Teflon coated & silicone impregnated pistons, Sealed Power rings, 3 angle valvejob, P&P head, perf cams, electric fan, CF intake tube w/aluminium heatshield/wrapped MAF tubing, Magnaflow 14816'd, Eaton M112 in-work
INTERIOR:Android Dynavin, hardwired V1 above rearview, 12" RE Audio DVC sub, MTX 81000D monoblock, CF silver trim, 5% tint
EXTERIOR:///MPar staggered 19's, H&R Stage 2/Bilstein HD, custom notched bumper, Shadowline trim, 750iL brakes w/ Axxis pads
190hp 97 328ci
PERFORMANCE:Single mass flywheel, ///M3 clutch
EXTERIOR:Z4///M staggered 18's, rolled fenders, tinted markers
Musk is pretty shady as well - their ebay ad shows completely different fenders from what they're actually selling. Doubt I'll be going that route either.
I like how the fitment lab overs look, but havent seen much in terms of fitment. There's also that guy @brooksty on instagram thats selling full sets of overs for like 380 shipped I think, but again, not sure how they fit other than 1 person that I talked to that said the rears didn't line up at all
I'm currently working on a custom wide body at the moment, as soon as I can post pics I'll share
@Ollie1662 I tried to PM you but it wouldn’t let me. I’m interested in a set of these if your still making them though. I know I’m late to the post lol
Bookmarks