Track Day Video Thread

[4ABHGE]

First time out at the island. Here's a few highlights and a lap of the track at 1:56.4

Ended up with a 56.1 but the battery died that session... always happens lol

https://youtu.be/9AP8X24m3Og

[poweredbyg60]

nothing fancy first time out in the E36. spin/slide at end.
this is Corvette museum motorsports park, bowling green, ky.

[Nugs]

Few videos from my e36.

Car is a 1994 M3
Pretty much stock apart from
AD08 tyres
KW V1 coilovers
Poly bushings in the rear end
3.91 diff
PFC pads








All my videos are here
https://www.youtube.com/user/BigNVeiny/videos?sort=dd&shelf_id=0&view=0
Including videos from my previous cars (135i and Renault Megane)

[AC Coupe]

First time at Buttonwillow, recent transplant from the East Coast. Fun track! http://youtu.be/iayiMrr78Vs


Sent from my iPhone using Tapatalk

[jrkoupe]

First time at Buttonwillow, recent transplant from the East Coast. Fun track! http://youtu.be/iayiMrr78Vs


Sent from my iPhone using Tapatalk

u living out left now?.....
u r an og coupe guy for sure.....how many miles on that car?......orig engine?...

mine has 213k!..but I bought another track ride to save the coupe.

cool ....enjoy

[AC Coupe]

u living out left now?.....
u r an og coupe guy for sure.....how many miles on that car?......orig engine?...

mine has 213k!..but I bought another track ride to save the coupe.

cool ....enjoy

Less than 80k on the chassis. The first motor lasted about 55k. But it essentially gets driven only on track and to and from tracks.

[Greg S]

MSRH CW
Date: 1-24-16
Lap time: 1:38.537(TT3 record)
Car: 2008 BMW M3 DCT
Total vehicle weight with driver: ~3580 lbs
Wheel horsepower: 376 peak WHP
Tire size and model: 275/35/18 Hoosier A7
Estimated ambient temperature: ~40*
Notes: MCS double adjustable remote reservoir, all solid/spherical bushings/bearings, PFC front BBK, gutted rear interior, 1 race seat, stock pass seat, I/H/E, tune, pullies, front and rear wing


MSR-C 1.7 CCW
Date: 3-13-16
Lap time: 1:18.804
Car: 2008 BMW M3 DCT
Total vehicle weight with driver: 3580 lbs or so
Wheel horsepower: 376 peak WHP
Tire size and model: 275/35/18 Hoosier A7
Estimated ambient temperature: Don't recall
Notes: MCS double adjustable remote reservoir, all solid/spherical bushings/bearings, PFC front BBK, mostly stripped rear interior, 1 race seat, stock pass seat, I/H/E, tune, pullies, front and rear wing


TWS CCW
Date: 4-23-16
Lap time: 1:48.524
Car: 2008 BMW M3 DCT
Total vehicle weight with driver: 3580 lbs or so
Wheel horsepower: 376 peak WHP
Tire size and model: 275/35/18 Hoosier A7
Estimated ambient temperature: 70's
Notes: MCS double adjustable remote reservoir, all solid/spherical bushings/bearings, PFC front BBK, mostly stripped rear interior, 1 race seat, I/H/E, tune, pullies, roll bar, front and rear wing

[MemphisRob]

Here is my best lap at Memphis International Raceway.

[poweredbyg60]

another fun weekend at NCM. Tried harry's lap timer for the first time.

[jim13x]

My first race. NJMP Lightning, SCCA STU. Qualified 4th, finished 2nd.



The 30 min video hasn't been edited so if you want the highlights:

Start https://youtu.be/X-yGv1gdjJo?t=182
Gained a spot: https://youtu.be/X-yGv1gdjJo?t=514
Learning to negotiate traffic https://youtu.be/X-yGv1gdjJo?t=600
Leader pulls off line with engine issues, I'm now in 2nd overall https://youtu.be/X-yGv1gdjJo?t=766
More traffic experience https://youtu.be/X-yGv1gdjJo?t=1047
Car in the wall exiting one https://youtu.be/X-yGv1gdjJo?t=1205
Catching a slide https://youtu.be/X-yGv1gdjJo?t=1320
More traffic, leader in sight https://youtu.be/X-yGv1gdjJo?t=1603
Trying too hard on the last lap https://youtu.be/X-yGv1gdjJo?t=1710

Incredibly fun. I dropped almost 8 seconds a lap from Saturday to Sunday. The other drivers are so damn good you can't help but learn and go faster. The car is a 98 M3 with an intake, track pipe, basic shark tune (230 hp) and the normal track upgrades (brake pads and lines, ground control, konis, slicks). And yes, I forgot to put my visor down.

[bmxmax]

[mechanicalzen]

Not sure if this thread contains any footage from the NW corner, but here's a couple of laps. They're not fast, I'm in C group. Maybe that makes it easier to check out the scenery. '98 M3 with track mods, 275,000 miles on original engine.

The Ridge Motorsports Park, Shelton, WA:



Pacific Raceways, Kent, WA

[justinco]

Finally got my e36 on the track after installing CF sunroof delete and a TC Kline roll-bar. First track day at High Plains Raceway toward middle of the video.

[poweredbyg60]

finally cut a clip with the go pro 2 and external mic.

[s50b32sc]

2 laps from Botniaring.
First is getting heat up, second was my fastest.
Car is supercharged and highly modified.

[jrkoupe]

2 laps from Botniaring.
First is getting heat up, second was my fastest.
Car is supercharged and highly modified.

mother of god........hp?


suspension?...tires?

wish I could see your hands/st wheel......I hate just the hood......lol

Ive shyed away from tracking a car that is s/c'd......is it reliable???????.ive walked away from some 4 sale.....

[s50b32sc]

mother of god........hp?


suspension?...tires?

wish I could see your hands/st wheel......I hate just the hood......lol

Ive shyed away from tracking a car that is s/c'd......is it reliable???????.ive walked away from some 4 sale.....

714hp/8050rpm.
JRZ 2-way adjustable racing shocks. Rear has double triangular wishbones, only original parts at rear are drive shaft joints.
Front is stock style, but big modifications done.
Michelin slicks, rear 31/71/18 and front 30/65/18.

I need to find better place for camera, polycarbonate windscreen shakes quite much at high speed.

My engine has been quite reliable, but it's fully built with good parts. It's been running few years in my old car.

Car:

28493833581_f63d595e0d_b.jpg

More pics:
https://m.flickr.com/#/photos/57971177@N02/

[jrkoupe]

never in a million yrs did I expect that...lmao....wow


714..........geeeee zusssssss



is that a 7 towing it all????????



so u have 16 posts here......I guess u spend your time building/racing and not bullshitting...lol

is there a build thread???????....fock

[SpaceRangerJoe]

I feel like "Highly modified" on the internet often means someone gutted the interior and has some bolt ons. This is incredible.

[s50b32sc]

Yes, its my dads 2006 745d.
My own e39 530d refuses to tow trailer, it goes to limb home mode at 3000rpm

I have build thread, but its finnish. So not much for you guys, I think.

Only parts, which are not seen big modifications are gearbox (dreaming about new one), aluminium doors, prop shaft and tail lights.
Nearly all made by myself. Some suspension parts, brake brackets and engine management are made by pro:s.

[jrkoupe]

give me the build link......I know finnish....


btw, I always finnish..never had a dnf

its its finnish then its done, right?....lol

pls share it......

[s50b32sc]

give me the build link......I know finnish....


btw, I always finnish..never had a dnf

its its finnish then its done, right?....lol

pls share it......

You need to register, before you can see thread. But link is: http://www.btcf.fi/forum/showthread.php?t=332448

[s50b32sc]

Long version of earlier track. And now you can nearly see hands

[jrkoupe]

now that I likey.....

[Pat533i]

https://www.youtube.com/watch?v=xMOtc2CMQ7A