Bought one this week, it was delivered very quickly. My door handle is starting to go out, going to try and take care of it tomorrow.
ello Hiper, okay?
I need a repair kit for the handle of the driver's door. What is your e-mail to contact?
All the best.
Hyper I really need a set of these for my 91 850i. Send me an email sebas2768@yahoo.com
I would but, unfortunately, the "compose" key on my email machine is still busted. Parts are on back order.
Good news, the "reply" key works like new.
So...
if you could perhaps/maybe use the contact information provided in the post just previously...
1993 850Ci
I found your timely published "How To Fix" info on repair of the driver's side exterior door handle...the problem I currently enjoy on my car - - I cannot open the driver's side door from the outside. The inside handle works ok. Is this fix for my car?
The article mentions reference to a kit. Is there such an item that could be acquired or better yet, does anyone know of a repair facility in the Southern California area, that could fix my door handle? Any suggestions are appreciated.
Yes, Hyper has your door handle repair fix. See post #32
I got my kit and just ordered door gaskets. I'm hoping to tackle this on the CSi in the next couple weeks. I calculate about 2-3 hrs work per side from start to finish? Does that sound about right?
CB42366 - 1991 850i 6-speed. Brilliantrot & Black Nappa Leather
CD00144 - 1994 850CSi. Hellrot & Black Nappa Leather
My other projects:
Supercharged Tbirds, V8 Tbirds, V8 Mustang Convertible, Audi V8 Quattro & Audi S8
Probably 2 hours on the first side, half that on the second. Just fiddly little land mines can make it bad: losing the small screws behind the inner door handle, breaking the fragile plastic connectors on the many wiring sockets, etc. The wires between the door frame and door card are not lengthy, so it helps to have a second person hold the door card when you reconnect everything. Make sure you have good lighting, and follow Hyper’s directions – it will all go well.
Mark in mid-MO
1993 BMW 850Ci 6-speed
2011 Cadi CTS coupe 6-speed
CB42366 - 1991 850i 6-speed. Brilliantrot & Black Nappa Leather
CD00144 - 1994 850CSi. Hellrot & Black Nappa Leather
My other projects:
Supercharged Tbirds, V8 Tbirds, V8 Mustang Convertible, Audi V8 Quattro & Audi S8
Hi Fellow Bimmer Fans,
Many of you know me, as I rebuild a few Bimmer parts.
I now offering to FIX your e31 Broken Door Handles. Send me your Door Handles, for my install
I have new Fabricated SS parts, that I can install, into both of your e31 Door Handles
My Door Handle FIX installed is $190.00 pair + return ship via, includes install
USPS Priority Mail Med Flat Rate Box is $17.00 + Ins, see my web site for Insurance feeschedule
A Single DH is $125.00 +RS +ins
so send me your e-mail for a final price.
to jay_c_stratton@hotmail.com
Pay by check,
OR
If PayPal (I will quote),
Best, Jay
In case you were wondering how to actually remove the Door Handles from the Door,
On my website # 17, page one Caption, I have a Link to a Tutorial, scroll down and then copy/paste.
Cheers,
Here is the Link in BF, https://www.bimmerforums.com/forum/s...rrent-websites
Please read the Top Part, then go to # 17 e31 Door Handle Repair
LINK is also in the footer
Last edited by master6; 11-28-2021 at 04:21 PM.
Jay
'88 M6 Cinnabar Red / Nappa Natur Highline Interior (10-87) Santa Ana, California. USA
My NEW Website, Link : https://www.jaysbmwparts.com
Booster repair
https://www.jaysbmwparts.com
A/C Wingcell Compressor leak repair
https://www.jaysbmwparts.com
e31 Door Handle Fix,
https://www.jaysbmwparts.com
Last edited by CD05001CIA; 11-28-2021 at 10:26 PM.
Dear CD05001CIA ,
Why are you so upset,
It is called competion, and you are comparing apples to oranges,
I Started my e31 Door Handles over 2 years ago. At that time I read that Hyper was retiring. I did not need to get his permission.
Have you seen were he is still in business?
Why are you such an angry person, were you post your anger, with never mentioning your real name, an you just hide behind your alias.
In fact if you were to really read both of our services, Hyper used to sell a DIY Kit, and he did not post his prices on line.
Wereas I do not have a DIY product, I include the install of my product into the clients DH. (Apples to Oranges).
And I am not afraid of posting my Prices.
In fact I rebuild 17 different products and have been of Service to Bimmer Forums for over 10 years, and I have websites to help even DIYers with my Tutorials.
You should not post while DRUNK.
Best, Jay Stratton,
Jay
'88 M6 Cinnabar Red / Nappa Natur Highline Interior (10-87) Santa Ana, California. USA
My NEW Website, Link : https://www.jaysbmwparts.com
Booster repair
https://www.jaysbmwparts.com
A/C Wingcell Compressor leak repair
https://www.jaysbmwparts.com
e31 Door Handle Fix,
https://www.jaysbmwparts.com
Easy now guys... first off, Jay's solution is completely different from Hyper's or Ed's... and he does it for you... both sides...
I have used Jay services before and it work great. A few socal8 member have usedJay also because of his services and also a local guy here in SoCal
Sent from my iPad using Tapatalk
Since its always been about community service, keeping cars on the road, I don't mind other solutions doing the same.
In fact it takes the pressure off, makes me less obligated to keep owner's cars working.
I think it's kinda odd though, running a pivot swap service, because most of total handle project is extracting the assembly and putting it back in.
And isn't the vehicle down while the assembly is in transit?
I did take a 1 year off while changing houses to SoCal, but have been back in for some time and make 'em whenever people ask.
No I don't have a website, no I am not on Facebook, no I don't sell on eBay.
People know where to find me. Hint: 8pivotalMoments at gmail.
Have shipped about 600 pieces, all at the same original price that shall not be named (on BF).
Gregory J. Pollock . . . (626)-720-3645
10546 Pinewood Ave.
Tujunga, CA
'so upset?' yet another development time waster, who doesn't know Stow High In Transit.
'still in business (hobby)...' well yes.
Do the other 16 and come up with solutions that don't already have one.
NOT AN ALIAS... THAT IS THE VIN(Vehicle Identification Number: WBAEG4323SCD05001 // PLATE: 1265445) |see pic| anyone with Govt access to VIN data (DMV, LEO, Public Info Request) can access the information(QED).
TD-2_REG.jpg
Instagram IG: bye.bye.the.end
' I rebuild 17 different... ' "I am NOT impressed.", Joyce Meyer
Was sober during rant. Now drinking 40's.
Last edited by CD05001CIA; 11-29-2021 at 12:56 AM.
Let's stop bickering guys....
Here is my solution: https://www.ebay.com/itm/234236288340
Cheers!
Bookmarks