are the rubber ends on the plastic door sills replaceable? anybody have any leads on this?
these
http://c535348.r48.cf3.rackcdn.com/70689.jpg
Nicholas diFeliciantonio
Purveyor of Parts
95 M3 Alpine on hurricane
that's weird. Mine don't have rubber ends...
"Torque is like cowbell... you can never have too much." - Michael Cervi
Well I can't, I found some rare m3 individual ones and the rubber in bad
Nicholas diFeliciantonio
Purveyor of Parts
95 M3 Alpine on hurricane
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
I hate this about my car. You see it every time you open the door too.
yup. do they sell em new from dealer?
TRM Coilovers 670F/895R | BBS LM | Corsa RSC36
Mine were cracked... decided to remove the rest so it wasn't such an eyesore. I've since forgotten about it.
Thanks for bringing it up and making me worry about it again!!!! Ha Ha.
Got them here. I hate the ltw carbon ones. So tacky with the fake carbon strip. If that strip was real it would be a different story
Nicholas diFeliciantonio
Purveyor of Parts
95 M3 Alpine on hurricane
http://realoem.com/bmw/showparts.do?...78&hg=51&fg=55
03 COVERING FRONT SCHWARZ 2 51478122458 $25.45
I just ordered a set from bmwpartstore.com. I should get them by tomorrow.. Ill let you know if there the right ones because the description on realoem isn't so good.
Can anyone confirm what those little plastic end cap covers are in terms of part number? I dont need a whole new door sill for my 1997 M3 sedan. The part numbers posted and links on Google (and RealOEM) seem to just refer to these plastic end covers as the entire door sill which is not my problem. The part number is just n M3 sedan door sill anyway which would not help me even if I did need a new entire door sill.
I cant imagine these plastic caps cost more than a couple bucks.
Thanks in advance.
1988 911 TURBO / GUARDS RED / Concours Queen 61K miles
2006 CAYMAN S / GUARDS RED / Daily Driver 45K miles
2005 M3 COUPE / PHOENIX YELLOW / Concours Queen 18K miles
1997 M3 SEDAN / HELLROT / Perfection Project 56K miles
"There Is No Substitute."
"The Ultimate Driving Machine."
Yeah the only way to get them is to replace the entire sill, as far as I know. Unless you want to try and fabricate your own and glue them in.
1999 M3/2/5 - Titanium Silver - Track/Weekend Toy
Who here has a 3D printer & could make up a batch? While you're at it, could you make a bunch of the rear window gasket L shaped corner pieces?
And some door tweeter/mid bezels?! Gawd, why do we love these shit-boxes so much?
Current:
98 M3/4/5 Alpine/Magma
05 MazdaSpeed Miata
Sold:
00 Honda VFR
99 528iT M/T
98 M3/4/5 Arctic/Dove
94 R-package Miata
89 Honda NT650
87 325is turned SpecE30
last time I checked,you could get the bezels if you bought the speaker too.
Dammit. My driver's side just disintegrated on me when drying the doorjambs this last weekend. I like the 3D printer idea. My dad has one, but I'd need some seriously accurate measurements since he's 1000 miles away. Postage is gonna get really expensive here in the next few weeks!
so are these (what looks to be rubber ends) available or once they re cracked and gone just forget about them?
Forgot about mine years ago...lol
Estoril/Modena '97 M3...sold for the second time.
------------------------------------
You only live once, and I'm running out of time...
certainly wont make it go quicker.. ok! it is what it is
thx!
Bookmarks