Results 1 to 8 of 8

Thread: EWS - DME Sync. E36 MS41

  1. #1
    Join Date
    Feb 2013
    Location
    flensburg
    Posts
    37
    My Cars
    1995 BMW 328i Coupe

    EWS - DME Sync. E36 MS41

    hallo, my problem is that the dme "ms41" from my 1995 e36 328i is broken.
    so i bought a used dme from a 328i.i went to bmw to ews dme sync.but
    the repairman says he canīt sync a used dme.i must buy a new one for ~750,- *no way*. i called another bmw-seller says it would 300,- .costs
    to make a simple - ews dme sync.

    so now i have bmw standart-tools( ediabas,inpa,ncs-exp,winkfp. ect)

    can anyone please tell me :can i make the ews -dme sync. self with inpa ?
    when yes,how to?or simply say whether it is possible with inpa?

    excuse me bad english

    greeting
    Last edited by v2x; 02-13-2013 at 04:38 PM.

  2. #2
    Join Date
    Apr 2008
    Location
    Brooklyn, New York
    Posts
    368
    My Cars
    BMW
    You should look into Dis 44 and it will do what you need...Hard part is getting the software to work and properly configured to laptop..

  3. #3
    Join Date
    Feb 2013
    Location
    flensburg
    Posts
    37
    My Cars
    1995 BMW 328i Coupe
    hi,thats a problem. ther is not even a rudimentary detailed instructions in german to install and get it to run with ads/obd interface.

    is there no possibility to do it with inpa?

    greeting

  4. #4
    Join Date
    Apr 2008
    Location
    Brooklyn, New York
    Posts
    368
    My Cars
    BMW
    INPA will not do what your looking to do to align DME-EWS, DIS 44 or Progman is your best choices and the instructions are pretty straight forward...You should contact IcemanBHE for his setup that he is offering which is setup for ADS and fully working condition...The links to softwares you find on this site as well as others all have been taken down due to federal regulations.
    *CODING BMWs in N.Y Area 917-939-4980*
    Call or Text for INFO

  5. #5
    Join Date
    Feb 2013
    Location
    flensburg
    Posts
    37
    My Cars
    1995 BMW 328i Coupe
    hi i found that from user:alfrietos

    ""INPA can easily syncronize the DDE/DME with the EWS. First get the ISN from the DDE/DME from the coding section of the control board by pressing F3 (atleast by my program). write off the ISN then go to the 'activate' part of the EWS. Press F1 (Writing ISN) and simply type the characters you read off the DDE/DME. Press OK and voila!! the EWS and the DDE/DME are synced""

    greetings

  6. #6
    Join Date
    Apr 2018
    Location
    Suomi
    Posts
    1
    My Cars
    328 e36
    Old thread, but can any one confirm this?
    I am about to align my old ews (e36 328 1995/10) with "new" dme from wreck yard (e39 528i 1997). Old dme cold`t be flashed because it had the old chip type,"new" dme has the newer chip, but ews is problem.

  7. #7
    Join Date
    Jul 2004
    Location
    Houston, TX
    Posts
    12,459
    My Cars
    36 Cylinders
    INPA does it, but so does this easily

    https://www.bimmerforums.com/forum/s...0-vagcom-cable
    -Abel

    - E36 328is ~210-220whp: Lots of Mods.
    - 2000 Z3: Many Mods.
    - 2003 VW Jetta TDI Manual 47-50mpg
    - 1999 S52 Estoril M Coupe
    - 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
    - 2019 M2 Competition, self-tuned, 504whp
    - 2016 Mini Cooper S

  8. #8
    Join Date
    Jun 2009
    Location
    South Carolina
    Posts
    31,073
    My Cars
    2004 330 vert 2004 X5
    If your car has a production date prior to December 1995 your car should not have EWS2 and it should not require ews alignment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •