This is just a kind of compilation thread. I have a nice collection of aftermarket e23 parts plus I've been researching what options are out. Nowadays there is not much of anything new for e23, all the companies have finished their runs and have no plans for making more. An interesting side note though is that I spoke with Racing Dynamics and they still have the capability to make a run of parts, but the minimum amount would be 25 so that's a good amount of e23 people needing to buy it. If there's enough of you guys wanting the RD parts lemme know and I can look into a group buy. Anyhow, here's the parts I'm aware of for direct replacement aftermarket performance parts for e23. There are a couple other parts I have heard of but cannot verify if they actually ever existed so lemme know what info you have. I'll be adding more and if you think of more let me know and I'll add to the list. I'll also try to post pics for reference so if you have pics of these items I can post those up too for reference. And if you have any of these items for sale lemme know about them I might be interesting in buying them.
------Springs------
-Dinan
-Racing Dynamics
-Suspension Techniques
-BavAuto
-H&R
-Lowtec Coilovers
-Motorsport Series
-MK Motorsport
-----Struts-----
-Dinan
-Racing Dynamics
-MK Motorsport
-----Strut Bars-----
-BavAuto
-Hartge
-MK Motorsports
-Racing Dynamics
-----Sway Bars-----
-Dinan
-Racing Dynamics
-Motorsport Series
-Suspension Techniques
-MK Motorsports
-----Aero/Bodykits-----
-BBS
-Zender
-Hartge
-Racing Dynamics
List for possible Racing Dynamics group buy (25 is the magic number)
- SicStang03
- Hit Man X
- cakezinni
- BIMMERBOYZ
- MoonlitMechanic
- UhhhClem
- DevInAz
Last edited by CMG; 02-18-2013 at 08:24 PM.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
I would be in for a RD front and rear sway. Hell, I would buy a couple if it makes us get to 25 haha.
Set of sways for sure, perhaps two.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
I'm in for sways!
Ok cool so that's 5 or 6 maybe. Once it gets to at least 10 i'll get serious with rd and see if we can make some magic happen.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
I have a question about rims on the e23, 87' 735i. What's the earliest or newest year rims can you put on the old body 7s.
Go ahead and try and make some magic happen. I will buy up the leftover sets. I'm sure there is a lot more interest outside of this board.
Get specs on what size front and rear they can produce.
I got some really really good info today. I contacted mods to see if it's ok to do here then I'll post up.
Last edited by CMG; 12-07-2012 at 02:13 PM.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
Nice! Post up as soon as they give the OK. If they say no, PM me the details.
This may help if it goes with the theme of this thread, if not delete it:
ECU chipping:
745i 013/024 Motronic from Jarmo Havulinna
http://www.elisanet.fi/kingshill/745i/intro.htm
http://www.745i.avulan.eu/
He is the original and the best. Ljets only have a Hobbs switch for overboost, so you simply disconnect it for higher than 10psi.
735i 059 Motronic from Mark D'sylvia
http://www3.sympatico.ca/mdsylva/products.htm
Pretty much the most up-to-date chip available.
735i 059 Motronic from BavAuto
Unable to link, just check on their site. Pretty sure these are reboxed Jim Conforti chips that work well.
735i 059 Motronic from Miller
https://millerperformancecars.com
They offer a tune yourself kit aka the WAR system as well as a simple MAF conversion to be rid of the air flow meter.
735i 059 Motronic from Dinan
http://www.dinancars.com/
Probably the original and really underwhelming at best compared to what is available.
735i 059 Motonic from Turbocharging Dynamics:
http://http://www.turbochargingdynamics.com/
Turbocharing chip with revised timing tables.
733i 008 Motronic
I do not know of any available at this time, nor who produced them. They are out there used, yet pretty difficult to find.
You are really better off converting a 3.2L car to 179 Motronic as the 3.2L is pretty similar to the 3.4L B35 in terms of powerband, compression, etc... you are then able to delete the separate idle box and chip the computer, plus you gain a better idle and a very simple on board diagnosis system as well as utilize all of the 1985-1992 M30 electronics such as the AFM, fuel injectors, ICV, etc. The 179 combined with the B35 2" outlet exhaust manifolds on the US B32 should really let this motor rip!
Turbocharging:
Dinan
http://www.dinancars.com
Not available anymore. These kits were CARB legal best to my recollection making them higher demand items. Probably T4 on center flange with 38mm wastegate port.
Cartech
They are out of business making the M30 kits. Manifolds and medium sized air to water intercooler kits are out there if you search for a while. T4 on center flange flange with a 38mm wastegate port.
Turbocharging Dynamics
http://www.turbochargingdynamics.com
TCD still makes their high quality M30 exhaust manifolds. T4 on center flange with 38mm wastegate port. Also make large air to water intercooler kits, chips, Megasquirt connections, high stall torque converters for auto guys, etc. Really a great place to deal with for go fast turbo parts.
BMW
This is the OE M102/M106 KKK based stuff from the 1980 to 1986 745i cars. The turbocharger flange only fits the BMW K27 and it is a very underwhelming kit in stock form as it simply cannot move enough air at high RPM. The turbocharger's compressor side is very puny stock, they suffer from wastegate creep, undersized intercoolers, strange downpipe/wastegate dump pipe assembly, and other oddities. Also remember, most of this stuff is nearing on 30 years old thus making it well worn.
If you utilize this system, try to pick up for nearly no money or just buy a TCD kit as you will be spending quite a bit to make it perform well.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Good info. Regarding Jarmo he's still around but i don't know if he's still doing car stuff. He made the Tuoma perfection kit which i have never seen but heard of. Anybody have details or pics on that?
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
I spoke to him 3-4 weeks back and he is making 745i chips still. Also considering doing another run on those four gauge panels for the auto cars.
Is that the kit with the wastegate with the additional pressure port? Justin has that as well as a local guy to me.
I make E23 parts.
09/1983 745i (stolen spring '13 around Houston, TX Achatgruen on nutria buffalo. 8481080)
10/1984 745i
11/1984 745i
11/1984 735i (10:1-265/6)
Ford, MB, and GM round out the pack.
Yes, that's the one.. the Tuoma perfection kit. I still have the paperwork from when it was originally installed, it says Tuoma perfection oy (not sure what the oy means). Also have the details on how to install everything. Came with the modified adjustable wategate, boost controller, ECU chip and the 4 gauge auto panel.
A lot of good info in this thread. We should get Jarmo to make a run on the manual gauge panel too... Then I can formally convert my console to complete the manual swap haha.
Oy is short for Osakeyhtiö
used in Finland for limited company designation like LLC in the US or GmbH in Germany or sPa in Italy, etc. Totally tangent to the thread but I was bored and scouring the internet for things.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
Hitman, I would be in for a 4 gauge panel for my auto 745i.
I sent Jarmo an email waiting to hear back.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
To see what he has available or what he has planned. Probably the same stuff u guys talked about.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
Someone needs to find the old team745 guys and se if they will release any info they may have.
That's what i have and i still have jon jacobs number i think but i got the last of his stuff long time ago. I think he might be out of the game but i could give it a try.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
Maybe he could still provide whatever info he has still laying around. Too bad there isn't much of a market for the performance parts anymore. Even the people who have these cars now are scared to spend more that $50 on anything.
Count me in for RD sways. Do they have any other parts?
80 B6, 81 & 82 323, 85 745i, 86 535i-all euro. 01 750iL Blk/Blk 08 335i
I'm still waiting to hear back from mods regarding whether I can do a group buy type thing here for the bars. RD doesn't make any other parts for the e23 currently they stopped years ago. I also heard back from Jarmo and he still makes chips for the different ecu, Hitman listed the websites, the main one will be done in a few months.
Last edited by CMG; 12-09-2012 at 03:28 PM.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
I don't think group buys are against forum rules... especially if you aren't profiting on it. It's not like we are promoting a product that a sponsor here offers lol
Last edited by SicStang03; 12-10-2012 at 12:00 AM.
I agree but never done it before so just checking. Still waiting to hear from iceman.
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
Bookmarks