A long overdue thread.
This thread will be designated for the Boosters and soon to be Boosted of New England. There are many very knowledgeable gurus in your backyard that thrive on force feeding air via. Turbo or supercharger.
These are a great bunch of guys that have very quickly become some of my closest friends. Our love for BMWS and modifying them is almost beyond belief. So with this thread we can locally unite whether it be to bounce ideas, seek advice, give recommendations, lend a helping hand, or just get together for beers.
Looking foreword to meeting you all.
Butters
96 328is
M52.
GT35R
OBD2 (Technica tuned)
500+rwhp
New Hampshire
pbonsalb
99 M3
S52
GT35R T4
500+rwhp
New Hampshire
Modaddict
97 M3 and 94 332
S52
GT4094
600+rwhp
New Hampshire
M3saloon
M50tu
6269RS
398 rwhp at 17psi
Massachusetts
Bricas45
01 540
S/C 9.5 psi
New Hampshire
Turbo///M50
92 325is NV
AA STAGE 2
Garret T3 t04e
Massachusetts
CJ
S52 e36 318is
Vortech blower @ 14psi
Fairfield County CT
Last edited by Butters Stoch; 01-26-2014 at 07:12 PM.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Forced induction meet after show n shine? I wanna see some bad-ass supercharged and turbo cars!
PT6262 - SPA Mani- NickG Tuning - TiAl - CES Cut-Ring - Blood Sweat & Tears
PT6262 Budget Build!! | CES Cut-Ring Install Thread
Im going to try to make it, not sure yet.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Hey, making this thread is a great idea, for the one's that don't know my name is Dan and my car is a 94 325i with an active auto c-38 supercharger kit
So how many of us are there in the area? How many in NH? MA? VT? ME? I know CT has a bunch.
My car is in a billion pieces hoping to have it back together by next spring.
I was going widebody... but cant afford the work+paint so will be selling the the fender flares and just getting a respray
E36 in pieces
Ahhh our first from MA. Welcome to the club.Originally Posted by m3saloon
What kind of flares are they? May be interested, it could take care of my rust and traction issue in one shot.Originally Posted by Turbo ///M50
Last edited by Butters Stoch; 09-24-2012 at 02:14 PM. Reason: Automerged Doublepost
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Im the only turbo car in maine AFAIK. There is a supercharged Z3 around here though. I think.
PT6262 - SPA Mani- NickG Tuning - TiAl - CES Cut-Ring - Blood Sweat & Tears
PT6262 Budget Build!! | CES Cut-Ring Install Thread
NH has 4 turbo cars
and a handful of s/c's at least that I know of.
Phil may know closer to the real numbers.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
I just know of the four turbo cars and maybe a few supercharged cars, and think there are probably more, so I am curious as to the actual numbers myself. Hopefully this thread will flush out some new ones so we can share resources and knowledge.
Let's not forget about fender rolling party's.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Me! Just friends of mine alone we have a40r e46m3 and a big gt35r e36m3. Couple of s/c cars down here and a few modded 335s.
"Rhode Island... ruining BMW's since 2007"1995 M3 part out: Mint Rolling Chasis-Mint, Heated black Vaders-m50 w/ARP2k, mls .140- boost logic manifold, gt30, tbe- BNIB BC Coils- etc etc:
http://forums.bimmerforums.com/forum...1#post26197731
I shall get a list going, and edit them into the original post
It may help someone down the line with similar setups.
Maybe we could just give a short description of engine, setup etc.
Something like this
Butters:
96 328is
M52
GT35r T3
OBD2 (Technica tuned)
Last edited by Butters Stoch; 09-24-2012 at 09:31 PM.
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
My buddy has a turbo m20 in his 2002. It is soo close to being done.
Colin
1997 M3
US S52
6262 T3
406WHP
There is also a turbo e30 up here around campus. I dont think its running right, but hes hoping for 300whp.
PT6262 - SPA Mani- NickG Tuning - TiAl - CES Cut-Ring - Blood Sweat & Tears
PT6262 Budget Build!! | CES Cut-Ring Install Thread
9.5psi supercharged 2001 540i in Southern NH
I say we have a FI meet one of these days would be awesome...maybe even a FI meet/dyno day?
Last edited by Bricas45; 09-25-2012 at 02:51 PM.
2001 540i6 Sport
Engine Mods: Dinan Throttle Body, Dinan MAF, M60 Intake Manifold, Dinan SC Bracketing, Dinan Crank Pulley, Vortech V2 SQ SC, water/air intercooled @ 9.5 psi, 2 heat exchangers, Intercooler piping by Wicked CAS, Vortech BOV, 42lb injectors, high flow fuel pump, Custom Tuned by ACE performance, Evosport power pullies Exhaust Mods: A1 Headers, Random Technology 100 Cell cats, Dynomax Race Bullet, Eisennman Quad Race, 3" Stainless Piping, AEM wideband Suspension Mods: Eibach springs/sway bars, Koni Sports, Powerflex, BMP strut reinforcements, Dinan Strut Bars Brake Mods: M5 Brakes, Stoptech stainless brake lines, Axxis Ultimates, Bav Auto Drilled/Slotted Rotors Transmission Mods: 3.15 with Quaife LSD , Z4M shifter, UUC Transmission Mounts, Clutchmasters FX300 Aesthetics: M5 bumpers, M5 Mirrors, M5 Trunk Lip, M5 Instrument Cluster, M-tech door sills, M-tech side molding, Style 65s with Michelin PS2s, 35% tint all around
Wow you are right down the road from me.Originally Posted by Bricas45
1996 332IS
Built 3.2
CES/Steed TS Precision 6466, spraying a "$π!℅" load of meth.
Technique Tuning 80# tune.
1/4 mile 10.84 @ 136.72
Your 1 and only stop for all your BMW performance needs
WWW.CESMOTORSPORT.COM
Would love to check out that 328is you have sometime. Keep in touch let me know if there are any meets.Originally Posted by Butters Stoch
2001 540i6 Sport
Engine Mods: Dinan Throttle Body, Dinan MAF, M60 Intake Manifold, Dinan SC Bracketing, Dinan Crank Pulley, Vortech V2 SQ SC, water/air intercooled @ 9.5 psi, 2 heat exchangers, Intercooler piping by Wicked CAS, Vortech BOV, 42lb injectors, high flow fuel pump, Custom Tuned by ACE performance, Evosport power pullies Exhaust Mods: A1 Headers, Random Technology 100 Cell cats, Dynomax Race Bullet, Eisennman Quad Race, 3" Stainless Piping, AEM wideband Suspension Mods: Eibach springs/sway bars, Koni Sports, Powerflex, BMP strut reinforcements, Dinan Strut Bars Brake Mods: M5 Brakes, Stoptech stainless brake lines, Axxis Ultimates, Bav Auto Drilled/Slotted Rotors Transmission Mods: 3.15 with Quaife LSD , Z4M shifter, UUC Transmission Mounts, Clutchmasters FX300 Aesthetics: M5 bumpers, M5 Mirrors, M5 Trunk Lip, M5 Instrument Cluster, M-tech door sills, M-tech side molding, Style 65s with Michelin PS2s, 35% tint all around
My setup
92 325is
M50 nonVanos
AA stage 2
garret T3 tO4e
E36 in pieces
Still waiting...
http://forums.bimmerforums.com/forum....php?t=1572746
Lol at least you have a nice set of wheelOriginally Posted by M-technik-3
E36 in pieces
Won't be running them, I'm 5 lug now from an E30 M3 set up. This was my remaining 4 lug car so I converted it. To make life easier, They are for sale if interested.
Car will be S52, C38-81 stage II with Meth spray. Thinking it's just gonna be lacking traction with a 3.46 45% lock up diff. So debating using my 2.97 to get some gear out of it with a ZF320. Been looking in Germany for a 6 speed but they are still fetching too much to be worth it at the moment.
Bookmarks