Helrot Red on Black 325i Sedan Full Part Out! Plus 2 LSD's 3.38 and 3.15

[m3mods]

I have a 1993 Helrot Red bmw 325i 4 door sedan that I'm parting out. Has black interior Let me know what you need.

Here is a link to my add for the two LSD's (3.38 and 3.15)

http://forums.bimmerforums.com/forum...3#post24737503


What is sold or damaged:

Engine and transmission
Driveshaft
Exhaust
Passenger side fender
Both mirrors

I will update when other items are sold.

Thanks,

Reilly

[overide19707]

im very interested in the left front door and right front door. any pics? and shipping info to 83843?

[m3mods]

The doors would have to go by freight. Do you know if you have a freight terminal there cause that would be the cheapest way to send them. Ill get you some pictures in a few hours. Thanks,

Reilly

Also do you want the door with the exterior handle, window, window regulator and motor and everything? Or just the door shell?

[overide19707]

Ya there seems to be a freight terminal (through fedex) about 30 miles from where i live. and I pretty much just want a complete door including everything. that way i can just replace the shells that i have already with ones that are like new.

[m3mods]

Ok well I'll get back to you with some pics and a shipping quote. Thanks,

Reilly

[overide19707]

awesome thanks for the quick replies

[chapellej]

Wiring harness still available and for vanos or non vanos

[m3mods]

Sorry Non Vanos Harness is gone with the motor.

The paint is pretty faded on both doors but they're straight. Let me know if your still interested and I'll get a shipping quote. Thanks,

Reilly

[Regamaster]

Need black A-Pillar trims with no broken tabs shipped to 60490.

[overide19707]

im still interested in the doors as i will have to get them painted black anyways. as long as the doors come with the molding and everything still intact thats what im looking for. the person who had the car before didnt take care of it and there is no molding or mounts to hold the windows on the motor

[m3mods]

It looks like the passenger side front door will need a little body work. The cheapest shipping method I found so far is Greyhound ($70 for one door and $105 for two). Id like to get $100 per door since it's coming with the glass, window regulator and motor, handle and trim pieces. I'll get you some pictures later on today. Sorry for the delay with the pics my phone is broken and I have to borrow a camera. Thanks,

Reilly

im still interested in the doors as i will have to get them painted black anyways. as long as the doors come with the molding and everything still intact thats what im looking for. the person who had the car before didnt take care of it and there is no molding or mounts to hold the windows on the motor

Need black A-Pillar trims with no broken tabs shipped to 60490.

The pillars are grey unfortunately as is the headliner.

[m3mods]

Pictures posted

[m3mods]

Bump

[m3mods]

Bump

[HeyGuy]

arm rest?

[m3mods]

This one didn't have an armrest from the factory (which is actually quite nice cause the armrest would always get in my way when actually driving hard) but the center console is in excellent condition.

arm rest?

[kalbasaa]

Would u happen to have side skirts? And maybe an m3 front and rear bumper?