$75 shipped
You still have to splice wires for the O2 sensors, but I also have an option for a complete plug and play SAP sim (see signature).
Includes zip ties, butt connectors, and detailed instructions. $70 shipped.
Money back guarantee: if you install properly on a m52/s52 and have any issues you can return it for a full refund within 2 weeks of purchase.
Last edited by gpeterson; 04-04-2016 at 09:52 AM. Reason: added SAP power connector
Instruction manual is available here - http://e36-electronic.com/Documents/...lationV1.0.pdf
This is very high quality, not so "home-built" looking like the DIY version out there.
-includes everything necessary for installation (wire ties, butt connectors)
-electronics sealed in epoxy for protection against moisture/vibration
-high-temperature, color-coded GXL wire cut to correct length and covered in wire loom
-individually tested
Also works on s52 e39.
Last edited by gpeterson; 08-03-2012 at 06:59 PM.
What is the benefit to having one of these?
CONTACT ME FOR DETAILING: http://forums.bimmerforums.com/forum....php?t=1865606
Work on an e39 540 sap?
bump for new molded power connector
Ill be in for one when its more plug and play. +1 for you though for making it easier for us.
That will be awesome
bump
Any pics of the new connectors attached for the O2's? I'd like to see it ...
Should have pics of the full plug & play version tomorrow or Wednesday.
Pricing may be more than I hoped as the connectors/pins are difficult to find and cost more than expected. It is looking like an extra $50 ($145 total) for the plug & play version, but I may be able to bring that down by ordering a larger volume connectors.
Is $145 do-able for you guys that want the plug & play version? That is still significantly cheaper than the AA sim and I believe mine are much better.
sounds good to me.
Bump for a great seller, with a great product.
Think I'm going to buy one soon to hv it for a future use. When I get headers I will hv it handy.Originally Posted by gpeterson
so no need to cut wires with this new o2+ power source wiring harness? Just plug and play? Where does the power plug go into?
Infiniti G35S Turbo BMW M3/4/5 Ninja ZX6R 636
Penn State University '08...better than your school since 1855
Sigma Lambda Beta International Fraternity Incorporated
UTI Class of '10, BMW "STEPchild"
Acurazine.com Mod Squad
This one plugs in to the SAP power connector but still requires splicing of the O2 sensor leads. If you want full plug & play, zero splicing, 10min installation, and no permanent changes to your wiring check out this one:
http://forums.bimmerforums.com/forum....php?t=1881207
Just built another batch so I have plenty ready to ship. I'll also be able to start same-day shipping when ordered before 10am pacific time.
S54 swap DME flashing - $100
S54 swap CAN interface board (for proper A/C & check engine light) - $275
e36 SAP sim/secondary air pump simulator: $75 - standard or $170 - plug & play
e36 post-cat O2 sims: $115 shipped, plug & play
First post updated with new photo. Still have some ready to be shipped.
S54 swap DME flashing - $100
S54 swap CAN interface board (for proper A/C & check engine light) - $275
e36 SAP sim/secondary air pump simulator: $75 - standard or $170 - plug & play
e36 post-cat O2 sims: $115 shipped, plug & play
Still have a few more ready to go.
S54 swap DME flashing - $100
S54 swap CAN interface board (for proper A/C & check engine light) - $275
e36 SAP sim/secondary air pump simulator: $75 - standard or $170 - plug & play
e36 post-cat O2 sims: $115 shipped, plug & play
Have a new batch, ready to ship!
S54 swap DME flashing - $100
S54 swap CAN interface board (for proper A/C & check engine light) - $275
e36 SAP sim/secondary air pump simulator: $75 - standard or $170 - plug & play
e36 post-cat O2 sims: $115 shipped, plug & play
Bookmarks