Page 1 of 8 12345678 LastLast
Results 1 to 25 of 198

Thread: secondary air pump simulator

  1. #1
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5

    secondary air pump simulator (SAP simulator)

    $75 shipped




    You still have to splice wires for the O2 sensors, but I also have an option for a complete plug and play SAP sim (see signature).

    Includes zip ties, butt connectors, and detailed instructions. $70 shipped.

    Money back guarantee: if you install properly on a m52/s52 and have any issues you can return it for a full refund within 2 weeks of purchase.

    Last edited by gpeterson; 04-04-2016 at 09:52 AM. Reason: added SAP power connector

  2. #2
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Instruction manual is available here - http://e36-electronic.com/Documents/...lationV1.0.pdf

  3. #3
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    This is very high quality, not so "home-built" looking like the DIY version out there.

    -includes everything necessary for installation (wire ties, butt connectors)

    -electronics sealed in epoxy for protection against moisture/vibration

    -high-temperature, color-coded GXL wire cut to correct length and covered in wire loom

    -individually tested

  4. #4
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Also works on s52 e39.
    Last edited by gpeterson; 08-03-2012 at 06:59 PM.

  5. #5
    Join Date
    Jun 2012
    Location
    Quarryville, pa
    Posts
    76
    My Cars
    1997 M3 sedan
    What is the benefit to having one of these?

  6. #6
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Quote Originally Posted by Nu2myM View Post
    What is the benefit to having one of these?
    Most aftermarket headers do not have provisions for the secondary air pump tubes and you will get a check engine light without a functioning SAP or a simulator.

    There are also people with track cars that remove the SAP to cut weight and clean up the engine compartment.

  7. #7
    Join Date
    Mar 2012
    Location
    Baldwin, GA
    Posts
    337
    My Cars
    1999 BMW 540i Sport 6spd
    Work on an e39 540 sap?

  8. #8
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Quote Originally Posted by Lelan View Post
    Work on an e39 540 sap?
    Possibly, someone is testing for me soon, will report back here.
    Last edited by gpeterson; 08-07-2012 at 09:55 AM. Reason: Automerged Doublepost

  9. #9
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    bump for new molded power connector

  10. #10
    Join Date
    Jul 2011
    Location
    socal
    Posts
    96
    My Cars
    135I size doesn't matter
    Ill be in for one when its more plug and play. +1 for you though for making it easier for us.

  11. #11
    Join Date
    Mar 2012
    Location
    Baldwin, GA
    Posts
    337
    My Cars
    1999 BMW 540i Sport 6spd
    That will be awesome

  12. #12
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    bump

  13. #13
    Join Date
    Jul 2007
    Location
    Long Beach, CA
    Posts
    2,616
    My Cars
    '97 BMW 332ti
    Any pics of the new connectors attached for the O2's? I'd like to see it ...

  14. #14
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Quote Originally Posted by Marv17 View Post
    Any pics of the new connectors attached for the O2's? I'd like to see it ...
    Should have pics of the full plug & play version tomorrow or Wednesday.

    Pricing may be more than I hoped as the connectors/pins are difficult to find and cost more than expected. It is looking like an extra $50 ($145 total) for the plug & play version, but I may be able to bring that down by ordering a larger volume connectors.

    Is $145 do-able for you guys that want the plug & play version? That is still significantly cheaper than the AA sim and I believe mine are much better.

  15. #15
    Join Date
    Jul 2011
    Location
    socal
    Posts
    96
    My Cars
    135I size doesn't matter
    sounds good to me.

  16. #16
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Quote Originally Posted by Marv17 View Post
    Any pics of the new connectors attached for the O2's? I'd like to see it ...
    Here you go, just a quick cell phone pic, will have better pictures soon:



    I only have one ready to ship right now for $145 and still have a handful on the non-plug & play for $95.

  17. #17
    Join Date
    Sep 2010
    Location
    Winnipeg, Manitoba
    Posts
    420
    My Cars
    1998 328is
    Bump for a great seller, with a great product.

  18. #18
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Quote Originally Posted by Curtis328 View Post
    Bump for a great seller, with a great product.
    Thanks! I have more ready to ship.

  19. #19
    Join Date
    Jul 2007
    Location
    Long Beach, CA
    Posts
    2,616
    My Cars
    '97 BMW 332ti
    Quote Originally Posted by gpeterson

    Thanks! I have more ready to ship.
    Think I'm going to buy one soon to hv it for a future use. When I get headers I will hv it handy.

  20. #20
    Join Date
    Aug 2010
    Location
    NY/FL
    Posts
    2,707
    My Cars
    '99 Acura CL, '98 M3/4/5
    so no need to cut wires with this new o2+ power source wiring harness? Just plug and play? Where does the power plug go into?

    Acura 2.3 CL BMW M3/4/5 Ninja ZX6R 636
    Penn State University '08...better than your school since 1855
    Sigma Lambda Beta International Fraternity Incorporated

    UTI Class of '10, BMW "STEPchild"
    Acurazine.com Mod Squad

  21. #21
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Quote Originally Posted by Da Infammus 1 View Post
    so no need to cut wires with this new o2+ power source wiring harness? Just plug and play? Where does the power plug go into?
    This one plugs in to the SAP power connector but still requires splicing of the O2 sensor leads. If you want full plug & play, zero splicing, 10min installation, and no permanent changes to your wiring check out this one:

    http://forums.bimmerforums.com/forum....php?t=1881207

  22. #22
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Just built another batch so I have plenty ready to ship. I'll also be able to start same-day shipping when ordered before 10am pacific time.
    S54 swap DME flashing - $100
    S54 swap CAN interface board (for proper A/C & check engine light) - $275
    e36 SAP sim/secondary air pump simulator:
    $75 - standard or $170 - plug & play
    e36 post-cat O2 sims: $115 shipped, plug & play

  23. #23
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    First post updated with new photo. Still have some ready to be shipped.
    S54 swap DME flashing - $100
    S54 swap CAN interface board (for proper A/C & check engine light) - $275
    e36 SAP sim/secondary air pump simulator:
    $75 - standard or $170 - plug & play
    e36 post-cat O2 sims: $115 shipped, plug & play

  24. #24
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Still have a few more ready to go.
    S54 swap DME flashing - $100
    S54 swap CAN interface board (for proper A/C & check engine light) - $275
    e36 SAP sim/secondary air pump simulator:
    $75 - standard or $170 - plug & play
    e36 post-cat O2 sims: $115 shipped, plug & play

  25. #25
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,975
    My Cars
    1998 M3/4/5
    Have a new batch, ready to ship!
    S54 swap DME flashing - $100
    S54 swap CAN interface board (for proper A/C & check engine light) - $275
    e36 SAP sim/secondary air pump simulator:
    $75 - standard or $170 - plug & play
    e36 post-cat O2 sims: $115 shipped, plug & play

Page 1 of 8 12345678 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •