Ordered and awaiting it to arrive! Can't wait to start my car finally, will report back
97 Turbo 3.2L M3 - Cutring / ARP - RSI Top Mount - Gt4088r - ID1300 - Tial WG - 22RPD Tuned - 93 Octane - 3.5" Stainless
would really like to get on one of these
Cleared my pm's
Will these work on M3's? Will it pass smog in California with this installed?
Just ordered one can't wait for it to arrive great seller and great communication
Has anyone actually done back to back dyno pulls with this sw or is it all seat of the pants impressions to this point?
[2004 330xi/6] Orient/Natural :: 117-142k :: ZSP :: ZPP :: ZCW
[1998 M3/4/5] Cosmos/Black :: 113-125k :: TCKline D/A (500/600) :: GC Plates :: RD Sways :: GC Rear Arms :: ZHP Rack :: 3.64 Diffsonline :: PF FCAB :: BW RTAB :: AKG Subframe :: TMS Pulleys :: AA & Borla :: XBrace :: TRM C2s :: BW lines :: DTC60 :: Safety Equipment
Past:
[1995 M3] Avus/Dove :: 141-242k :: S52 OBDI :: M50 manifold :: 3.5 HFM :: Turner Chip :: XBrace :: SS Lines :: Turner RTABS :: Vogtland CS :: Bilstein Sport :: Z3 rack
[1999 M3] Cosmos/Black :: 65-87k :: TCKline S/A (400/500) :: Turner plates :: UUC Front Sway :: PF RTABs :: AA Intake :: Borla :: XBrace :: TRM C2s :: CL RC6E :: Safety Equipment
[1993 325is] Brilliant/Black :: 135-139k :: Bilstein sports :: Eibach sways and springs :: Dinan camber plates and chip :: Borla :: LSD
[1983 320i] Safari/Brownish :: 219-242k :: homebrew CAI :: some rust :: multicolor body panels
http://www.r3vlimited.com/board/showthread.php?t=327183
Read the entire thread
Last edited by 328iJunkie; 06-24-2014 at 09:44 PM.
I do have a quick question, why is it that these ecus dont have the availability to run chips? Also how much would it be to get a ecu shipped to 85020
Just received mine in the mail and i am extremely satisfied so far it idles great it has no more cel and all useless emissions parts are delted havent had a chance to drive it yet but so far so good
Recieved my DME from Hak on Saturday, popped it in on Sunday, everything is working as described! Really saved my bacon on this can finally get this little ti swap through emissions. I ran a Emissions readiness with my OBDII tool everything came up GREEN after about 30 miles of driving. Performance increase for fuel mapping and increased limiter can definitely be felt! Great Job, excellent responsive and prompt Seller. +10
I tried Pming you but not sure if it went through. I have a few questions. Please email me at Blakebachelor@gmail.com
If this will pass CA emmisions, I want one. I'm swapping an s52 and retaining obd2 into my '92 e36.
Don't recall if i already adked but do you also make chips for 95 m3 ecu?
95 BMW M3 Alpine-
<GO...JIC Cross Coilovers- UUC RCAB, AKG FCAB, Rogue Engineering TM bushings- AA Gen3 Exhaust- Dinan F&R Strut Bars- Dinan F&R Sway Bars- X-Brace- Mishimoto Rad- BBS RK 17x8"- TRM Chip- Dinan BBTB- DIY CAI- JP Performance Headers- 21.5 injectors- JB Racing Flywheel- Bimmerworld TB boot- 540i MAF><SHOW...OE euro clear exterior lights- Depo w/ HID- Hurricane Alcantara interior- Stereo (Kenwood,Sony,MB Quart,Rockford Fosgate,JL Audio)- Black kidneys- Euro 3 Spoke- ZHP Knob- AutoDim Mirror>
Interested in a ECU for my '97 M3. PM me if you have any ready to go.
Yes it will pass.
DoneI tried Pming you but not sure if it went through. I have a few questions. Please email me
Yes I doDon't recall if i already adked but do you also make chips for 95 m3 ecu?
Yes I have plenty. PMedInterested in a ECU for my '97 M3. PM me if you have any ready to go.
Hey I got an email saying you tried to pm me and my inbox is full, but I don't have any messages! I think I don't have enough posts to PM. Can you email me? Evonfricken@gmail
Inbox clear, should be able to receive a PM now.
me need one too...pm sent
Last edited by 328ii; 11-04-2014 at 08:46 AM.
Yes I got plenty. Just send me a message if you need one
PM'd. I'm interested
///M
I'm interested in purchasing and sent a PM
Bookmarks