MS41.2 racing DME ECU for your 328i or M3
Tune is official BMW software used on the testing track on 96-99 M3. This ecu will also work great on your 328i M52, but perfect when doing engine swap into E30. This DME also can be used to pass emissions test(my special coding). Update January 2015: I now improved my coding to make the DME fully adaptive, this means nothing is deleted, this means that you can remove these sensors from the car and DME will adapt itself and not throw a check engine light, DME will adapt itself and be fully emissions compliant, all monitors are permanently set to pass.
DME features:
1. No EWS. Works with your existing module or without the module, so no EWS drama.
2. No secondary air pump system(pump,valve,solenoid,relay) you can remove all of these
3. No post catalyst 02 sensors, you can leave them there or take them out
4. No need to have catalytic converters, no muffler flap valve
5. No fuel tank pressure sensor, no spare tire tank vent valve, you can leave both there or remove them. This ecu uses only the fuel tank valve near the front strut tower for tank venting like obd1 bmw does.
6. Works for manual or automatic transmissions. trans ecu works fine with it. AC works. Cruise control works.
7. Full OBD2 diagnostics supported, it will even pass emissions, all readiness monitors are permanently set to pass.
8. 7200 rev limit, no speed limiter, maps are for 91 octane or higher.
9. No core charge, keep your own dme for backup
Price is $290 shipped
I have paypal, PM me if interested.
I also have 1995 OBD1 DME's for sale. For any other DME questions send me private message
Last edited by hakentt; 10-08-2019 at 09:23 PM. Reason: revision added. 2015
Pm'd
Do you have just the two ecu's available?
I want to order one for my s52.
Pm sent.
Bump for a good seller, I'm hoping to get 1 of these when I get headers
Infiniti G35S Turbo BMW M3/4/5 Ninja ZX6R 636
Penn State University '08...better than your school since 1855
Sigma Lambda Beta International Fraternity Incorporated
UTI Class of '10, BMW "STEPchild"
Acurazine.com Mod Squad
Ready to buy, sent a PM
What if u have FI? Can this ecu be tune to work with s/c'r?
Awesome seller, quickest shipping ever!
I'll take one for my 1998 328i.. I'm new and can't pm.. Please email me at
Gustnyc at g mail dot com.
Bump! Great seller, Fast shipping, and best of all no more check engine light!
Bump for a good guy, will be buying an ecu soon
bump
Does this come with a tune on it already or you're just providing a tuneable ECU?
Infiniti G35S Turbo BMW M3/4/5 Ninja ZX6R 636
Penn State University '08...better than your school since 1855
Sigma Lambda Beta International Fraternity Incorporated
UTI Class of '10, BMW "STEPchild"
Acurazine.com Mod Squad
Bump for a straight up bmw obd software guru. And this computer is AWesome!!! Forgot about messing with EWS, Oh wait you want to use it in your autotragic tranny car before you have all the parts ready to do your 5 speed swap but keep the computer and not need to reprogram the dme? No problem.
I was installing it as one of the techs from our best local bmw indy shop Bavarian Tuning came by and said that he's going to be buying some of these from the OP because they have had some many problems getting 41.1 reprogrammed anywhere else so they had to buy new dme from the dealer. So yea hanket if these guys in Santa Rosa start ordering a bunch from you I think Ill deserve a free reflash with I up my boost. :]
This sounds awesome
I'll be interested in this in a couple weeks for my S52 E30 swap.
Great seller, fast shipping, amazing product that does what it says it will do. Very happy with my ecu.
I might be ordering one soon, think mine is fried
2000 M Coupe, TCK coilovers, BBS RK.
Suppose I purchase this package with OBDII support to pass inspection, and I want to use my Shark Injector tuning with it as well. Will the two play nice together?
97 BMW M3 (s52b32) - VF-Supercharger kit ( Vortech V2-SQ supercharger, 32 pound injectors, VF tuning ), VDO/LeatherZ Gauge Kit (Oil Temp, Oil Pressure, and Boost), UUC Motorwerks RSC36 Exhaust, Stainless Steel 6-2 Exhaust Headers, Bilstein Sports, Rear Adjustable Camber bushings, Wheel Spacers 10mm in front 25mm in back, Uprated Clutch, UUC Shift Knob, Short Shifter and Clutch Stop, Cross Brace, Mason Engineering front strut bar, Contour Wheels, Euro Ellipsoid (Angel Eyes) HID Headlights, braided steel brake lines, aluminum thermostat housing, mishimoto aluminum radiator and silicone hoses and a partridge in a pear tree
I'm curious about this as well. Would I need to run another program with this dependant on mods? 3.5 intake,maf,m50 mani, header etc?Originally Posted by DeansBimmer
Thanks
Bookmarks