s50 s52 custom dcvee turbo kit and tune NJ

[switlikbob]

As some of you know, my car was totaled. I am selling a 90% complete turbo kit. Pickup in NJ or meet near NJ only, I am not shipping. I am not parting it out, so please don't ask for parts. Low ball offers will be ignored.

What you get:
413 dme with roadkill encryption board
4 different tunes (from richer to leaner, car was tuned in person on the street)
60# deka injectors
blow thru MAF
throttle body, vibrant elbow and aluminum maf tube welded
vibrant t clamps and silicone couplers
tial 50mm BOV, 38mm wastegate (9psi spring)
wastegate piping, downpipe, cat, resonator, vband (front half exhaust)
walbro fuel pump setup, ready to drop in the tank (needs new relay wire harness)
spa t4 exhaust manifold (with t4 gasket and exhaust gaskets)
vibrant catch can setup
hallman pro rx manual boost controller with ceramic ball
over subframe piping, intake piping (charge pipe from IC to TB was damaged)
custom a/c compressor relocation bracket for over subframe piping
custom turbo motor mount arm
cx racing intercooler with vibrant elbows welded on (damaged end tank)
comp triple ball bearing turbo 6065 .68 T4 vband (oil lubricated and water cooled) with lines (turbo has less than 1500 miles on it, no shaft play, works perfectly): http://forums.bimmerforums.com/forum....php?t=1728675

All you need to make this kit complete is:
a few fittings to hook up the turbo lines (oil and water)
either repair the intercooler or get a new one and transfer the elbows
have a new charge pipe made from the intercooler to the throttle body
a cat back exhaust

Please note, I had this setup running with built motor. If you put it on a stock motor, you had better install a head gasket spacer and ARP head studs. And I wouldn't run more than wastegate boost pressure until you talk to Jordan (RK Tunes). I have his contact info and will provide it as needed.


I might be forgetting something, please ask questions.

I am asking $3,500 OBO.

Pictures here: http://smg.photobucket.com/albums/v3...kbob/M3/turbo/

And my build thread: http://forums.bimmerforums.com/forum....php?t=1468153

For an extra couple of bucks, I can throw in my moates chip burner and some blank chips...this way Jordan can send you tune revisions remotely... Of course that will have to be worked out with him first.

[SiGmA]

Amazing deal man. GLSW.

[cmzwirner]

Screaming deal. Someone better jump on this.

[1SLWM3]

Damn! I want that turbo! If you part please let me know.

[switlikbob]

Damn! I want that turbo! If you part please let me know.

I'll let you know...

[GG///M3]

bump for a great deal

[cragg56]

I want that AC bracket. Sell it outright or know where I could get one?

[NOTORIOUS VR]

No sump is required with this setup?

[Nj85'325]

Why did I just sell my car...

[switlikbob]

I want that AC bracket. Sell it outright or know where I could get one?

AFAIK, it was the only one ever produced.

No sump is required with this setup?

By sump, do you mean scavenge pump? If so, I didn't run one.

[BadBoostedBmwM3]

AFAIK, it was the only one ever produced.

By sump, do you mean scavenge pump? If so, I didn't run one.

Awesome price bob! Who made the bracket?

[RK-Tunes]

Don made the bracket.
Bump for a good Guy.

[1980corvette]

if only you shipped

[switlikbob]

Don made the bracket.
Bump for a good Guy.

Thanks Jordan! Yes, dcvee / Don made it, as well as the bad ass motor mount arm.

[GG///M3]

Great deal.

[turbo b]

willing to part with the catch can setup?

[BadBoostedBmwM3]

willing to part with the catch can setup?

If he doesn't then I have a BNIB Greddy catch can kit.

Bob! The only reason I'm replying is because you said the kit is sold.

[e30polak]

Somone got a ridiculous deal!

[switlikbob]

Kit is still for sale!!! Buyer backed out. I am open to offers gentleman. This deal is hard to beat, so let's get it sold!

[FastrTHNu]

Killer deal right here!

[switlikbob]

TTT. What's the story? Nobody wants a 500whp M3 on this forum?

[biglou911]

As some of you know, my car was totaled. I am selling a 90% complete turbo kit. Pickup in NJ or meet near NJ only, I am not shipping. I am not parting it out, so please don't ask for parts. Low ball offers will be ignored.

What you get:
413 dme with roadkill encryption board
4 different tunes (from richer to leaner, car was tuned in person on the street)
60# deka injectors
blow thru MAF
throttle body, vibrant elbow and aluminum maf tube welded
vibrant t clamps and silicone couplers
tial 50mm BOV, 38mm wastegate (9psi spring)
wastegate piping, downpipe, cat, resonator, vband (front half exhaust)
walbro fuel pump setup, ready to drop in the tank (needs new relay wire harness)
spa t4 exhaust manifold (with t4 gasket and exhaust gaskets)
vibrant catch can setup
hallman pro rx manual boost controller with ceramic ball
over subframe piping, intake piping (charge pipe from IC to TB was damaged)
custom a/c compressor relocation bracket for over subframe piping
custom turbo motor mount arm
cx racing intercooler with vibrant elbows welded on (damaged end tank)
comp triple ball bearing turbo 6065 .68 T4 vband (oil lubricated and water cooled) with lines (turbo has less than 1500 miles on it, no shaft play, works perfectly): http://forums.bimmerforums.com/forum....php?t=1728675

All you need to make this kit complete is:
a few fittings to hook up the turbo lines (oil and water)
either repair the intercooler or get a new one and transfer the elbows
have a new charge pipe made from the intercooler to the throttle body
a cat back exhaust

Please note, I had this setup running with built motor. If you put it on a stock motor, you had better install a head gasket spacer and ARP head studs. And I wouldn't run more than wastegate boost pressure until you talk to Jordan (RK Tunes). I have his contact info and will provide it as needed.


I might be forgetting something, please ask questions.

I am asking $3,500 OBO.

Pictures here: http://smg.photobucket.com/albums/v3...kbob/M3/turbo/

And my build thread: http://forums.bimmerforums.com/forum....php?t=1468153

For an extra couple of bucks, I can throw in my moates chip burner and some blank chips...this way Jordan can send you tune revisions remotely... Of course that will have to be worked out with him first.

How much for the ecu ?


Sent from my iPhone using Tapatalk

[switlikbob]

How much for the ecu ?

$3500, I'll throw in the rest of the kit for free!

[NOTORIOUS VR]

TTT. What's the story? Nobody wants a 500whp M3 on this forum?

You're not willing to ship, nor are you willing to part.

If you're interested in parting and shipping PM me... I wouldn't want any of the fueling/ecu/MAF/injectors or damaged IC stuff (IC itself and damaged piping) I'm basically interested in the following... if you can make a deal with someone else for the rest of the stuff let me know.

• throttle body, vibrant elbow and aluminum maf tube welded
• vibrant t clamps and silicone couplers
• tial 50mm BOV, 38mm wastegate (9psi spring)
• wastegate piping, downpipe, cat, resonator, vband (front half exhaust)
• walbro fuel pump setup, ready to drop in the tank (needs new relay wire harness)
• spa t4 exhaust manifold (with t4 gasket and exhaust gaskets)
• vibrant catch can setup
• over subframe piping, intake piping (charge pipe from IC to TB was damaged)
• custom a/c compressor relocation bracket for over subframe piping
• custom turbo motor mount arm
• comp triple ball bearing turbo 6065 .68 T4 vband

[switlikbob]

All the hardware for this kit has been sold. I still have the tuning package. I will start a separate thread for that.