As some of you know, my car was totaled. I am selling a 90% complete turbo kit. Pickup in NJ or meet near NJ only, I am not shipping. I am not parting it out, so please don't ask for parts. Low ball offers will be ignored.
What you get:
413 dme with roadkill encryption board
4 different tunes (from richer to leaner, car was tuned in person on the street)
60# deka injectors
blow thru MAF
throttle body, vibrant elbow and aluminum maf tube welded
vibrant t clamps and silicone couplers
tial 50mm BOV, 38mm wastegate (9psi spring)
wastegate piping, downpipe, cat, resonator, vband (front half exhaust)
walbro fuel pump setup, ready to drop in the tank (needs new relay wire harness)
spa t4 exhaust manifold (with t4 gasket and exhaust gaskets)
vibrant catch can setup
hallman pro rx manual boost controller with ceramic ball
over subframe piping, intake piping (charge pipe from IC to TB was damaged)
custom a/c compressor relocation bracket for over subframe piping
custom turbo motor mount arm
cx racing intercooler with vibrant elbows welded on (damaged end tank)
comp triple ball bearing turbo 6065 .68 T4 vband (oil lubricated and water cooled) with lines (turbo has less than 1500 miles on it, no shaft play, works perfectly): http://forums.bimmerforums.com/forum....php?t=1728675
All you need to make this kit complete is:
a few fittings to hook up the turbo lines (oil and water)
either repair the intercooler or get a new one and transfer the elbows
have a new charge pipe made from the intercooler to the throttle body
a cat back exhaust
Please note, I had this setup running with built motor. If you put it on a stock motor, you had better install a head gasket spacer and ARP head studs. And I wouldn't run more than wastegate boost pressure until you talk to Jordan (RK Tunes). I have his contact info and will provide it as needed.
I might be forgetting something, please ask questions.
I am asking $3,500 OBO.
Pictures here: http://smg.photobucket.com/albums/v3...kbob/M3/turbo/
And my build thread: http://forums.bimmerforums.com/forum....php?t=1468153
For an extra couple of bucks, I can throw in my moates chip burner and some blank chips...this way Jordan can send you tune revisions remotely... Of course that will have to be worked out with him first.
Last edited by switlikbob; 06-15-2012 at 11:15 PM.
Amazing deal man. GLSW.
Screaming deal. Someone better jump on this.
PT6262 - SPA Mani- NickG Tuning - TiAl - CES Cut-Ring - Blood Sweat & Tears
PT6262 Budget Build!! | CES Cut-Ring Install Thread
Damn! I want that turbo! If you part please let me know.
bump for a great deal
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
I want that AC bracket. Sell it outright or know where I could get one?
Last edited by cragg56; 06-16-2012 at 10:28 AM.
No sump is required with this setup?
Why did I just sell my car...
85' Turbo M50 E30 | 95' M3 Nitrous, Coilovers, DJ Autos, UUC SSK
Awesome price bob! Who made the bracket?Originally Posted by switlikbob
This is my signature....
Don made the bracket.
Bump for a good Guy.
RK tunes
if only you shipped
Great deal.
“If liberty means anything at all, it means the right to tell people what they do not want to hear.”
― George Orwell
willing to part with the catch can setup?
If he doesn't then I have a BNIB Greddy catch can kit.Originally Posted by turbo b
Bob! The only reason I'm replying is because you said the kit is sold.
This is my signature....
Somone got a ridiculous deal!
www.facebook.com/Undr8dEmpireLlc Instagram: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti - http://www.bimmerforums.com/forum/sh...(-Project333Ti)
Kit is still for sale!!! Buyer backed out. I am open to offers gentleman. This deal is hard to beat, so let's get it sold!
Killer deal right here!
"If you can leave black marks from the time you exit a corner till the time you brake for the next turn, then you have enough horsepower." --Mark Donohue
TTT. What's the story? Nobody wants a 500whp M3 on this forum?
i got these parts for sale
front corner light for a 4 door E36 $20plus shipping
headlight eyebrows $20 plud shpping
M3 OEM radiator $100 plus shipping
M52 cams with trays high miles $150 shipped
M3 front calipers $150 plus shipping
18x8 offsed 35, front 18x10 offset 40 rear bsa motorsports wheels $400 plus shipping
obd2 valve covers $50 plus shipping
intake manifolds $50 plus shipping
estoril blue doors of a 96 M3 2door $200 plus shipping each
rear glass $50 plus shipping
rear trunk lid $150 plus shipping
new 1/4 is 800 ft away ))
You're not willing to ship, nor are you willing to part.
If you're interested in parting and shipping PM me... I wouldn't want any of the fueling/ecu/MAF/injectors or damaged IC stuff (IC itself and damaged piping) I'm basically interested in the following... if you can make a deal with someone else for the rest of the stuff let me know.
- throttle body, vibrant elbow and aluminum maf tube welded
- vibrant t clamps and silicone couplers
- tial 50mm BOV, 38mm wastegate (9psi spring)
- wastegate piping, downpipe, cat, resonator, vband (front half exhaust)
- walbro fuel pump setup, ready to drop in the tank (needs new relay wire harness)
- spa t4 exhaust manifold (with t4 gasket and exhaust gaskets)
- vibrant catch can setup
- over subframe piping, intake piping (charge pipe from IC to TB was damaged)
- custom a/c compressor relocation bracket for over subframe piping
- custom turbo motor mount arm
- comp triple ball bearing turbo 6065 .68 T4 vband
All the hardware for this kit has been sold. I still have the tuning package. I will start a separate thread for that.
Bookmarks