Page 1 of 9 123456789 LastLast
Results 1 to 25 of 211

Thread: Jeremy5000's Build Thread

  1. #1
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3

    Jeremy5000's Build Thread

    I've got enough PMs about questions about my car that I figured I'd start a build thread here...

    I bought it from the original owner with full documentation and 84,000 on the clock. It was bone stock, but not for long.

    Current:

    Editing by Dan Wagener

    Current Modification List:
    • TC Kline S/A Coilovers 500lbs/in front and rear
    • TC Kline offset front control arm bushings
    • Powerflex rear trailing arm bushings
    • Vorshlag camber plates
    • 17x8.5 et40 Kosei K1 Racing wheels
    • 245/40/17 Hankook V12 Evo tires
    • 225/45/17 Michelin Pilot Sport Cup tires
    • UUC System U DTM catback exhaust
    • Euro sidemarkers and tail lights
    • Black kidney grills
    • Motion Motorsports underpanel
    • 330mm Personal Neo Grinta
    • BMW X-Brace
    • Bimmerworld Aftermarket Blank Rotors
    • Performance Friction Z-Rated pads
    • VAC baffled oil pan thanks to 99Mpower
    • reinforced front subframe thanks to 99Mpower
    • Vorshlag 95A Competition Motor Mounts
    • Vorshlag 80pA Competition Trans Mounts
    • 2.8L Z3 Oil Pick Up Tube
    • Lemforder front control arm ball joints
    • Secure OPN
    Waiting to go on:
    • OEM S54 Radiator
    • Stewart Water Pump
    Need to order:
    • AKG reinforcements
    • Rear subframe bushings
    • Diff bushings
    • Bear Motorsports SSK



    Pictures from bringing her home.




    After getting used to the car I added some clears and black kidneys.




    Took some pics that came out looking really old in the snow...




    Then once I got passed the one year point I picked up some Kosei K1s but I looked like a 4x4...






    Then this passed summer is when the fun started to happen. I bought some TC Kline coilovers with Vorshlag camber plates, along with some other minor mods...







    One last pic, because racecar...
    Last edited by jeremy5000; 06-03-2018 at 05:34 PM. Reason: Automerged Doublepost


  2. #2
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Porsche, BMW, and Jeremy5000










    Comments and criticism are welcome, but I didn't take the pics, the 997 owner did. I also might be buying the M a friend for the garage so stay tuned...

    I've been accumulating quite a few parts recently and still have a ton to order so I decided to play some tetris before killing bugs with my front end Many more parts to come in the coming months since I have no sold my roll bar and maybe buy 3 piece wheels or custom RPF1s in a GB. If you look closely you will find a Bimmerworld gift card on the box that the xbrace is on, and also that box contains a new radiator. Edit: I will also add that the dresser has oil, oil filters, brake fluid, and amber lights.








    And for the cyclists out there:parrot:







    Last edited by jeremy5000; 05-05-2012 at 07:21 PM. Reason: Automerged Doublepost


  3. #3
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Had a BMW party at Andrew's to roll Mike's fenders and put on his wheels and my new steering wheel, and then we just did some other things too.














    UFO!!!!!!!!!!




    Steering wheel review: The 330mm wheel makes the steering feel so much tighter and more precise. I still can see the gauges fine, except for part of the gas and temp gauge. More pics of the steering wheel installed will come tomorrow for 3MPowered

    Parts Update: I no longer can add the steering wheel and hub to tetris with my parts, but I ordered a VAC baffled oil pan and a PC'd and AKG reinforced front subframe yesterday so that should be fun.

    More steering wheel and stereo/bluetooth/iPod setup:





    97000!
    Last edited by jeremy5000; 05-05-2012 at 07:22 PM. Reason: Automerged Doublepost


  4. #4
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Having some fun with instigram today:parrot:






    With all of this time travel I needed to go to Pepboys to grab an extra quart of oil to put in.

    My new lovely steering wheel... New seats will probably come this summer.


    And for all the comments on shitty pictures, it's instigram so they are supposed to suck... planning to have ATR Photography come out to take pics here though

    Hmmmm should I go back to ambers and do fog deletes and depo or dj auto lights?



    Some pics from today...






    Then my girl treated me to freshly brewed coffee and hand glazed donuts in the city... we saw an odd fella with blue hair though:taser:


    Finally paid for some more parts today from DER Motorsports... thanks again Dan!
    Drilled OPN
    Oil pan gasket
    2.8 Z3 Oil pick up tube
    Oil pan suction gasket
    Exhaust hangers
    Vorshlag motor and trans mounts


    Last edited by jeremy5000; 05-05-2012 at 07:23 PM. Reason: Automerged Doublepost


  5. #5
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    I was hoping to be teasing you guys with some OZ Mitos on my car today, but the seller is still unresponsive... I still went out and took pics though, and got a few packages from OahuMPower. Sorry for getting a little excited with HDR... this was my first time editing pics.













    Meat





    Whoops















    Ooooooooooooooh take a guess what this is... more packages should be coming this week

    Box 1:Powder coated and akg reinforced front subframe.

    Box 2:VAC baffled oil pan


  6. #6
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    All pictures are unedited, but I will mess with them later tonight


















































  7. #7
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3












































    Pictures for e39Hamann...










    Last edited by jeremy5000; 05-05-2012 at 07:26 PM. Reason: Automerged Doublepost


  8. #8
    Join Date
    Oct 2009
    Location
    Dublin, OH
    Posts
    7,886
    My Cars
    '95 M3, '17 Civic Si
    you got a non-perforated Neo Grinta?

    lame!!!!!!

    /opinion
    -Rich-


  9. #9
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Quote Originally Posted by das borgen View Post
    you got a non-perforated Neo Grinta?

    lame!!!!!!

    /opinion
    Ehhhh no other perforated leather in the interior. If you still had some for sale I woukd have got one from you


  10. #10
    Join Date
    May 2011
    Location
    Maryland
    Posts
    2,729
    My Cars
    '98 M3
    I see you listed two different tire sizes/brands. Still running staggered? If so, why?

  11. #11
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Quote Originally Posted by RatedM3 View Post
    I see you listed two different tire sizes/brands. Still running staggered? If so, why?
    Oh my bad... Hankooks 245/40/17 are on the koseis and the michelin 225/45/17 are on the ds2s.


  12. #12
    Join Date
    Dec 2008
    Location
    Philadelphia ,Pa
    Posts
    3,962
    My Cars
    2015 X1 & 2000 M5
    That's a shit ton of pics haha , but I say stay with clears for sure.

  13. #13
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Quote Originally Posted by e39hamann View Post
    That's a shit ton of pics haha , but I say stay with clears for sure.
    Yea, it took my computer forever to load


  14. #14
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Parts to be installed next week... still waiting on a few things to get here though


  15. #15
    Join Date
    Oct 2005
    Location
    Virginia Beach, VA
    Posts
    13,327
    My Cars
    99 M3, 01 F350
    oh hey.. that's my old oil pan, and a freshly reinforced/PC'd subframe...

    kinda like the other 6 subframes I have in the basement, that just came from the powdercoater this morning

    good stuff man
    "Torque is like cowbell... you can never have too much." - Michael Cervi


  16. #16
    Join Date
    Aug 2010
    Location
    Long Beach, CA
    Posts
    1,545
    My Cars
    95 M3, 2012 civic
    Quote Originally Posted by 99MPower View Post
    oh hey.. that's my old oil pan, and a freshly
    kinda like the other 6 subframes I have in the basement, that just came from the powdercoater this morning

    good stuff man
    oh really?

  17. #17
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Quote Originally Posted by 99MPower View Post
    oh hey.. that's my old oil pan, and a freshly reinforced/PC'd subframe...

    kinda like the other 6 subframes I have in the basement, that just came from the powdercoater this morning

    good stuff man
    Thanks! I should have some pics up next week of install at Ian's.
    Quote Originally Posted by mrbarnum View Post
    oh really?
    99mpower is pretty much my hero now. Between serving our country and helping me out with this stuff.


  18. #18
    Join Date
    Aug 2010
    Location
    Long Beach, CA
    Posts
    1,545
    My Cars
    95 M3, 2012 civic
    Quote Originally Posted by jeremy5000

    99mpower is pretty much my hero now. Between serving our country and helping me out with this stuff.
    He really is easy to talk to and helpful. Just ordered one of those PCed sub frames he's talking about I'll finally be updating my buildthread within the next week or so

  19. #19
    Join Date
    Oct 2005
    Location
    Virginia Beach, VA
    Posts
    13,327
    My Cars
    99 M3, 01 F350
    Quote Originally Posted by mrbarnum View Post
    He really is easy to talk to and helpful. Just ordered one of those PCed sub frames he's talking about I'll finally be updating my buildthread within the next week or so
    message sent on the rear subframe
    "Torque is like cowbell... you can never have too much." - Michael Cervi


  20. #20
    Join Date
    Dec 2004
    Location
    Northern Mexico
    Posts
    14,047
    My Cars
    none
    your pictures:miles ratio is pretty high man. stop taking pics and drive the damn thing.

    also, add "repair rear bumper scratches" to future mods/maint list man. every picture i see of your car from the rear (all 467 of them) all i see is the damn black scratches.

    Also, ditch the clears, they look ricer

    otherwise, very nice car man. love the red.
    coming soon, S54's for everything....

  21. #21
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Quote Originally Posted by weaksauce View Post
    your pictures:miles ratio is pretty high man. stop taking pics and drive the damn thing.

    also, add "repair rear bumper scratches" to future mods/maint list man. every picture i see of your car from the rear (all 467 of them) all i see is the damn black scratches.

    Also, ditch the clears, they look ricer

    otherwise, very nice car man. love the red.
    You have no idea how much those marks used to piss me off, but now I'm kinda fine with them and would much rather spend the cash elsewhere. Thanks though.


  22. #22
    Join Date
    Jul 2007
    Location
    Brentwood, TN
    Posts
    3,256
    My Cars
    2002 Imola Red E46 M3
    Nice!! Any plans engine wise?

    329097_10151144875184101_1020786818_o by boomersooner523, on Flickr
    Past:
    1995 Hellrot E36 M3: JBR LTW flywheel, TRM chip, Dinan exhaust and CAI
    1999 Cosmos E36 M3 Engine: TRM Tune, M50 manifold, B&B Exhaust, BW ASC delete, AFe CAI and LOTS of other stuff
    New: 2002 E46 M3, Imola, 6spd, KW V2, Stoptech BBK, Agency Power exhaust, Mason Engineering Strut bar

  23. #23
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Quote Originally Posted by boomersooner523 View Post
    Nice!! Any plans engine wise?
    I will eventually do cams and the whole nine yards as far as n/a goes, but i want to work on driver skill now. I'm doing all of the front end overhaul tomorrow if the rest of my parts come and then I will also do the rtab pockets, an alignment, and some suspension tuning. After that is just track days, a new helmet, and possibly some nice wheels for the street. I will also eventually buy another roll bar.


  24. #24
    Join Date
    Nov 2010
    Location
    Amuhrica
    Posts
    937
    My Cars
    98 M3 Sedan
    Are you ever around the NJ area? I swear I've seen your car on 38 in Maple Shade by the Walmart

  25. #25
    Join Date
    Apr 2010
    Location
    West Chester, PA
    Posts
    5,744
    My Cars
    98 M3
    Quote Originally Posted by l1ttlej7 View Post
    Are you ever around the NJ area? I swear I've seen your car on 38 in Maple Shade by the Walmart
    Last time I was in NJ was last summer at NJMP... should be back there pretty soon though

    Went to TST and Carlisle with some buddies and had some fun
















































    Sorry Anthony, only pic I have not taken on my cellpphone.









Page 1 of 9 123456789 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •