Page 18 of 19 FirstFirst ... 8910111213141516171819 LastLast
Results 426 to 450 of 453

Thread: Here we go again Matt's E36 M3 part 2

  1. #426
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    I haven't posted here in a while, since I just finished putting it together I might as well post an update.
    I recently was thinking about selling the M, decided to keep it and buy a little brother.
    Got a new fully built engine in place, replaced every sensor, plug and bolt with new OEM parts, updated the exhaust manifold to a twin scroll unit along with an upgraded GT3586R turbo... I also got bigger cams on the way, will be installing next weekend.
    Finally replaced the rear windshield gasket, the only one left from 1995

    Here are the two lovers together



    i also got a new plate
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  2. #427
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    I hit 300 miles yesterday, did the first oil change and coolant flush.


    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  3. #428
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Some photos of bee...












    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  4. #429
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    When finally all is running great this sh!t happens under the manifold



    Bought the replacement along with a new trigger wheel and vanos gasket for my new CAMs arriving today



    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  5. #430
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Im out of town and wont be coming back until week end but I sure miss driving the M, found these pics from last week... she is looking good!



    Last edited by Matutino; 07-25-2017 at 10:40 PM.
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  6. #431
    Join Date
    Oct 2004
    Location
    California
    Posts
    976
    My Cars
    ''95 M3, '17 M2
    looks great. what's the story with the lux door panel?

    Sent from my SM-G930T using Tapatalk

  7. #432
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Quote Originally Posted by crqflier View Post
    looks great. what's the story with the lux door panel?

    Sent from my SM-G930T using Tapatalk
    Thank you.
    I always liked them better, I searched and searched until I found a front a rear seat in pristine condition and replaced them.
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  8. #433
    Join Date
    Oct 2004
    Location
    California
    Posts
    976
    My Cars
    ''95 M3, '17 M2
    Quote Originally Posted by Matutino View Post
    Thank you.
    I always liked them better, I searched and searched until I found a front a rear seat in pristine condition and replaced them.
    I've been contemplating buying new panels. There are some in Germany (which wasn't the case a couple years ago when I checked).

    Sent from my SM-G930T using Tapatalk

  9. #434
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Hmmmm... if they have them in stock then I would get a pair
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  10. #435
    Join Date
    Oct 2004
    Location
    California
    Posts
    976
    My Cars
    ''95 M3, '17 M2
    Quote Originally Posted by Matutino View Post
    Hmmmm... if they have them in stock then I would get a pair
    They are pricey, but if I keep the m, I'll buy them. Not sure which way I'm headed.

    Sent from my SM-G930T using Tapatalk

  11. #436
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Quote Originally Posted by crqflier View Post
    They are pricey, but if I keep the m, I'll buy them. Not sure which way I'm headed.

    Sent from my SM-G930T using Tapatalk
    I hear ya, I have own mine for 5 years now and the car is getting smaller or I'm getting older.
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  12. #437
    Join Date
    Jan 2004
    Location
    NY
    Posts
    22,825
    My Cars
    skateboard
    So many fancies


    Sent from my iPhone using Tapatalk
    “If liberty means anything at all, it means the right to tell people what they do not want to hear.”
    ― George Orwell

  13. #438
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    The time has come, not sure yet, testing waters, let me know if you have any questions.
    https://www.bimmerforums.com/forum/s...5-BMW-M3-Turbo
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  14. #439
    Join Date
    May 2009
    Location
    los anageles
    Posts
    541
    My Cars
    98 M3 Coupe
    looks fantastic


  15. #440
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Quote Originally Posted by anarekist View Post
    looks fantastic
    Thank you.
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  16. #441
    Join Date
    Jan 2004
    Location
    NY
    Posts
    22,825
    My Cars
    skateboard
    Quote Originally Posted by anarekist View Post
    looks fantastic
    Indeed


    Sent from my iPhone using Tapatalk
    “If liberty means anything at all, it means the right to tell people what they do not want to hear.”
    ― George Orwell

  17. #442
    Join Date
    Aug 2002
    Location
    Denver, CO
    Posts
    5,343
    My Cars
    '98 M3
    Didn't find a set of cams that you liked?
    '03 911 Turbo 6MT fun car
    '18 Toyota Land Cruiser Daily driver/Ski Machine/Off Roader
    '15 Cayenne Diesel Wife's DD
    '17 KTM 690 "Adv" 2 wheeled Adventurer

  18. #443
    Join Date
    Apr 2005
    Location
    Florida and ATL
    Posts
    8,385
    My Cars
    1999 M3 and 1990 Jetta G
    wish I could afford
    TRM Coilovers 670F/895R | BBS LM | Corsa RSC36

  19. #444
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Quote Originally Posted by DocWyte View Post
    Didn't find a set of cams that you liked?
    Lol

    Quote Originally Posted by propcar View Post
    wish I could afford
    Well, if it sells I hope it goes to an enthusiast, would hate to sell it to someone that does not appreciate it.
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  20. #445
    Join Date
    Apr 2005
    Location
    Florida and ATL
    Posts
    8,385
    My Cars
    1999 M3 and 1990 Jetta G
    Quote Originally Posted by Matutino View Post
    Lol



    Well, if it sells I hope it goes to an enthusiast, would hate to sell it to someone that does not appreciate it.
    Hope so too man GLWS; If I could sell both of my cars tomorrow I'd buy yours always wanted a Dakar.
    TRM Coilovers 670F/895R | BBS LM | Corsa RSC36

  21. #446
    Join Date
    Aug 2002
    Location
    Denver, CO
    Posts
    5,343
    My Cars
    '98 M3
    Just keep on sending cams to me so I can test them out!
    '03 911 Turbo 6MT fun car
    '18 Toyota Land Cruiser Daily driver/Ski Machine/Off Roader
    '15 Cayenne Diesel Wife's DD
    '17 KTM 690 "Adv" 2 wheeled Adventurer

  22. #447
    Join Date
    Jan 2004
    Location
    NY
    Posts
    22,825
    My Cars
    skateboard
    Quote Originally Posted by DocWyte View Post
    Just keep on sending cams to me so I can test them out!
    Would you like me to send you mine with full exhaust ?


    Sent from my iPhone using Tapatalk
    “If liberty means anything at all, it means the right to tell people what they do not want to hear.”
    ― George Orwell

  23. #448
    Join Date
    Nov 2004
    Location
    Los Angeles, CA
    Posts
    199
    My Cars
    1999 M3
    Does that CARB sticker work?

  24. #449
    Join Date
    May 2003
    Location
    Irvine
    Posts
    9,252
    My Cars
    95 M3, 03 E55, 07 335I
    Car is sold
    Old set up: 520RWHP & 500RWTQ @ 20PSI 1/4 mile as of 7/26/15 12.5 @ 125MPH - 19PSI
    New set up: Steedspeed Twinscroll, Wiseco Pistons 8.8:1 CR, K1 Rods, Blueprinted and Balanced, ARP Main Studs, o-ring block, GTR 12mm head studs, GT35R with 86mm HTA billet compressor wheel (GT3586RHTA) TwinScrol 1.06 exhaust housing, Nick G custom tuning, 6 Speed Transmission, UUC Twin Disc Clutch, UUC EVO III, UUC DSSR 109mm, EVO 6 Speed Driveshaft, HFS-6 W/M injection, Zeitronix data logger, 3" SS full exhaust, Rallyroad strut bar, X brace, Race coilovers.

  25. #450
    Join Date
    Jul 2012
    Location
    Vernon, CT
    Posts
    145
    My Cars
    1999 M3 5spd
    In 4 days... in the middle of the week. That is impressive.
    95 cosmoschwartz M3/2/5 : 2012-1/1/2014 (worn rtab's and bald rear tires in the rain)

    98 cosmoschwartz M3/4/5 : 2016-3/10/2017 (understeering SUV)

    99 Estoril M3/2/5: 6/16/2017-current

Page 18 of 19 FirstFirst ... 8910111213141516171819 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •