Page 5 of 13 FirstFirst 12345678910111213 LastLast
Results 101 to 125 of 306

Thread: Conversion Parts For Sale

  1. #101
    Join Date
    Feb 2012
    Location
    Socal,ca
    Posts
    253
    My Cars
    97' E36M3 11' e92 lsxm3
    Im looking for anyone sell a LS2/3 engine... Im looking for a swap kit like Vorshlag or NA HotRods etc.. any info or leads.. im searching. Thanks

  2. #102
    Join Date
    Dec 2005
    Location
    Frederick, CO
    Posts
    4,683
    My Cars
    94 M353is
    SOLD - For those who bought an oil pan that didn't come with the oil cooler blockoff plate, I have the factory piece. It has one port (plugged) that can be drilled & tapped for a gauge sender or an Accusump. 15 shipped.



    EDIT: Cleaned out the garage and have a few more things that some folks may be interested in.

    AIR & EGR (?) exhaust gaskets. 7 shipped
    http://i76.photobucket.com/albums/j4...ps53f77584.jpg

    ABS wiring connector for those who want to relocate their ABS pump and not modify their original wiring. This can be spliced together to extend your OE wiring. 15 shipped.
    http://i76.photobucket.com/albums/j4...psb9bae04a.jpg

    Various AN fittings & hose. I have: (2) M14 banjo to male -3 AN adapters, a 10" long -3AN hose assembly with a straight female fitting and a 45 female, a male -4 to male -3 adapter, and an female M10x1.0 to male -3 adapter. 25 shipped for all of it. Will separate...we can work something out.
    http://i76.photobucket.com/albums/j4...ps3a670b64.jpg
    Last edited by turbosporttsi; 08-03-2013 at 12:19 AM.
    Sold:


    Aluminum 5.3L LSx (L33) w/ Muncie 4-speed (M21). Hurst Comp Plus shifter, LS1 intake, early LS1 cam, LS6 valve springs, custom 1-3/4" stepped longtubes, 3" single exhaust, I-J crank scraper, baffled oil pan, AL driveshaft.

  3. #103
    Join Date
    Aug 2008
    Location
    St. Paul mn
    Posts
    34
    My Cars
    98 audi a8, 96 240sx, 87 starion, 98 bmw 323is
    Anyone looking for a clutch , I would recommend an act street clutch for most applications, going through summit always works best because of their selection, Amazon had them listed at 417.64 with free shipping, I called summits order line, to see about price matching and he found it for cheaper. So I got it at 396.17 with free shipping for a act gm9-hdss!

    this is of course only for the ls1 swap people
    Last edited by kaaos; 07-24-2013 at 03:05 PM.

  4. #104
    Join Date
    May 2012
    Location
    San Jose, CA
    Posts
    125
    My Cars
    are teh worst.
    Sold.
    Last edited by Angry Earl; 08-14-2013 at 04:30 PM.

  5. #105
    Join Date
    Feb 2013
    Location
    Butler, PA
    Posts
    229
    My Cars
    E36 328iS, RB26 S13
    PM'ed Earl...

  6. #106
    Join Date
    Mar 2004
    Location
    USA
    Posts
    3,198
    My Cars
    96 328is 6.0L

    e36 LSx Engine Mounts and Trans Mount

    Hi,

    I have for sale my original e36 LS1 Engine mounts and Transmission Cross member that I've built for my car. I used it for probably couple of years before I was bored and redid the mounts in my car. These are obviously not pieces of art since it was the very first set that I've built for myself, but did work fine for couple of years. The same exact design that I duplicated off of these and are still in use and working in my cousin's LS2 swapped car that now lives in Denver.

    These mounts were made for my 1996 328is. These mounts will let you install an LSx engine and T56 trans in your e36 coupe with stock brake booster.

    You will need to buy the transmission mount that it was designed for - which is: Energy Suspension ENS-3-1108G. It cost about $25 from Advanced Auto Parts or you can order it from Summit Racing. The engine mounts that are used for this set up are: Energy Suspension ENS-3-1114G and included with the mounts.

    I was holding these mounts as I was planning on doing another LS1 conversion, but plans changed since and they just take up space in my garage. You can use these mounts to install the engine or have them as a starting/reference point and modify/upgrade them if you want to. Obviously custom headers will need to be implemented as my headers were custom built around these mounts.

    These mounts are sold AS-IS with no warranties of any kind. Again they were used in my car and worked for me just fine.

    You can see my build thread where I built and used these mounts in my sig. Also you can find a link to LS2 conversion where I built a dup of these mounts.

    Let me know if you have any questions.

    The price is $350 + S/H













    - 96 328is 6.0L. (LS1 to LS2 build thread: http://forums.bimmerforums.com/forum...ad.php?2098938)
    - 96 328is 5.7L. (LS1 build thread: http://forums.bimmerforums.com/forum....php?t=1289987)
    - 95 ///M3 6.0L. (LS2 build thread: http://forums.bimmerforums.com/forum....php?t=1619249)

    - 97 ///M3. (e46 Fender Flares/track car build thread: http://forums.bimmerforums.com/forum....php?t=1727098)
    - 96 328is (Dual Fuel Pump to Surge Tank thread: http://www.bimmerforums.com/forum/sh...ad.php?1964025)

  7. #107
    Join Date
    Sep 2010
    Location
    Acton, MA
    Posts
    214
    My Cars
    95 M3/2/5
    For sale is one of the t56 clutch line to BMW hard line adapters that come in sets of 2 from speedway.

    10MM-1.0 European to -4 AN Steel Male Brake Adapter Connector Fitting

    it was 27.24 for 2 shipped to my door, I will split it with someone and make it 13.62 shipped to your door.

    http://www.speedwaymotors.com/10MM-1...ing,32849.html

    EDIT: SOLD
    Last edited by sivart173; 09-24-2013 at 09:49 AM.

  8. #108
    Join Date
    Jun 2011
    Location
    Fl
    Posts
    1,464
    My Cars
    1989 325i: 00 M Roadster
    Quote Originally Posted by bimerok View Post
    Hi,

    I have for sale my original e36 LS1 Engine mounts and Transmission Cross member that I've built for my car. I used it for probably couple of years before I was bored and redid the mounts in my car. These are obviously not pieces of art since it was the very first set that I've built for myself, but did work fine for couple of years. The same exact design that I duplicated off of these and are still in use and working in my cousin's LS2 swapped car that now lives in Denver.

    These mounts were made for my 1996 328is. These mounts will let you install an LSx engine and T56 trans in your e36 coupe with stock brake booster.

    You will need to buy the transmission mount that it was designed for - which is: Energy Suspension ENS-3-1108G. It cost about $25 from Advanced Auto Parts or you can order it from Summit Racing. The engine mounts that are used for this set up are: Energy Suspension ENS-3-1114G and included with the mounts.

    I was holding these mounts as I was planning on doing another LS1 conversion, but plans changed since and they just take up space in my garage. You can use these mounts to install the engine or have them as a starting/reference point and modify/upgrade them if you want to. Obviously custom headers will need to be implemented as my headers were custom built around these mounts.

    These mounts are sold AS-IS with no warranties of any kind. Again they were used in my car and worked for me just fine.

    You can see my build thread where I built and used these mounts in my sig. Also you can find a link to LS2 conversion where I built a dup of these mounts.

    Let me know if you have any questions.

    The price is $350 + S/H













    PM Sent

  9. #109
    Join Date
    Mar 2004
    Location
    USA
    Posts
    3,198
    My Cars
    96 328is 6.0L
    Replied with email since your inbox is full
    - 96 328is 6.0L. (LS1 to LS2 build thread: http://forums.bimmerforums.com/forum...ad.php?2098938)
    - 96 328is 5.7L. (LS1 build thread: http://forums.bimmerforums.com/forum....php?t=1289987)
    - 95 ///M3 6.0L. (LS2 build thread: http://forums.bimmerforums.com/forum....php?t=1619249)

    - 97 ///M3. (e46 Fender Flares/track car build thread: http://forums.bimmerforums.com/forum....php?t=1727098)
    - 96 328is (Dual Fuel Pump to Surge Tank thread: http://www.bimmerforums.com/forum/sh...ad.php?1964025)

  10. #110
    Join Date
    Apr 2011
    Location
    Morgan Utah
    Posts
    1,662
    My Cars
    1995 M3
    Built for LSA Trans Am legal with stage 1 Dry Sump(DS not included)

    Will make great road race engine or add boost!

    Eagle crank and rods, ARP studs, Clevite bearings, 10.1 Molly pistons,
    stock bore and stroke

    ASA cam, Comp valve springs, sodium filled valves, LS rockers and pushrods, ARP hardware

    LS2 Intake, 90mm TB

    Block, honed and deck measured

    Stock heads(will make much more power if ported)

    Melling oil pump, water pump with AN fitting, injectors, fuel rail, covers, coils, plugs

    New Aluminum tubing and silicone 45’s included

    6800 rev limit tuned ECU and harness, will spin to 7300 safely

    438WHP on 91 Octane, used for 2 sprint races by Tom Sheehan

    Just port the heads for a lot more HP or add boost!

    $4900 OBO

    I will be able to post pics of the engine on the stand with the pan off as soon as my back heals up a bit more, tweaked it last week on another project.

    Thanks,
    Rick
    801-829-4997
    Last edited by raamaudio; 10-04-2013 at 03:18 PM.
    -1997 332ti CA edition street/track completely rebuilt in progress
    -2012 Duramax dually, Ultra high end audio, maximum sound deadening, perf, handling, custom leather.
    -2007 V8 4runner, murdered out, we love it buy might sell it instead of leaving it parked a few years.
    -2012 43' Voltage Toyhauler, not quite a race trailer but will make it work, going full time RV all over NA with it to run on all the tracks I can

  11. #111
    Join Date
    Apr 2011
    Location
    Morgan Utah
    Posts
    1,662
    My Cars
    1995 M3
    Updated LS1 for sale info
    -1997 332ti CA edition street/track completely rebuilt in progress
    -2012 Duramax dually, Ultra high end audio, maximum sound deadening, perf, handling, custom leather.
    -2007 V8 4runner, murdered out, we love it buy might sell it instead of leaving it parked a few years.
    -2012 43' Voltage Toyhauler, not quite a race trailer but will make it work, going full time RV all over NA with it to run on all the tracks I can

  12. #112
    Join Date
    Nov 2004
    Location
    The Black Hills (Souf Dak
    Posts
    9,349
    My Cars
    Diesels and a 04 M3
    Anyone have a bead on a T56? Looking for one that will handle 450 easily
    I'm a ROLEX wear'N
    Diamond ring wear'N
    KISS steal'n
    WHEELIN DEAL'N
    Limousine RIDE'N
    JET PLANE FLY'N , SON OF A GUN!
    And I'm havin a hard time holdin these alligators down!!!!!!
    WHOOOOOO!!!!!!

  13. #113
    Join Date
    Apr 2011
    Location
    Morgan Utah
    Posts
    1,662
    My Cars
    1995 M3
    I have an LS oil line adaptor plate for hooking up oil coolers, Accusump, etc and a one way valve for sale as well as some fittings.
    -1997 332ti CA edition street/track completely rebuilt in progress
    -2012 Duramax dually, Ultra high end audio, maximum sound deadening, perf, handling, custom leather.
    -2007 V8 4runner, murdered out, we love it buy might sell it instead of leaving it parked a few years.
    -2012 43' Voltage Toyhauler, not quite a race trailer but will make it work, going full time RV all over NA with it to run on all the tracks I can

  14. #114
    M5Hunter is offline 800 Wheel Torques Supporting Vendor
    Join Date
    Nov 2009
    Location
    Hanover, VA
    Posts
    3,714
    My Cars
    Turbo LS1 E39
    I've got an ABS harness "extension" for a e36 3 way ABS pump after you relocate it. Uses 2 OEM BMW connectors. Total length is 16"



    $20 shipped inside the US

  15. #115
    Join Date
    Apr 2009
    Location
    Pittsburgh
    Posts
    1,143
    My Cars
    99 M3 LS1, '11 WRX
    I've got a t56 for sale - decided to put a magnum behind my engine. 38k miles out of an '02 TA and is in good working condition to my knowledge. Does not have a shifter on it though. PM if interested.

  16. #116
    Join Date
    Jan 2013
    Location
    Naperville, IL
    Posts
    133
    My Cars
    1993 318is
    E36 302 exhaust setup...2 passenger side stainless shorty headers, 4 vband flanges, 3 flex pipes, 2 02 bungs, all t304 stainless and tig welded and heat wrapped.



  17. #117
    Join Date
    Jun 2009
    Location
    San Pedro california
    Posts
    516
    My Cars
    '94 325is ls1/T56
    I have e36 ls1 engine and trans mount av available pm for pics and price

  18. #118
    Join Date
    Apr 2013
    Location
    Carlos MN
    Posts
    62
    My Cars
    73 Camaro, 67 Nova
    PM let me know.

  19. #119
    Join Date
    Feb 2008
    Location
    Upstate
    Posts
    683
    My Cars
    2 Boosted,1 more left to
    Brand new Ls1 billet fuel rail 10an feed to 8an return fitting black. 10an hose crossover black fittings $85 shipped

    E39 LSX SWAP PARTS FORSALE


  20. #120
    Join Date
    Dec 2003
    Location
    Arlington VA
    Posts
    1,257
    My Cars
    E30 M3
    Quote Originally Posted by ckpitt55 View Post
    I've got a t56 for sale - decided to put a magnum behind my engine. 38k miles out of an '02 TA and is in good working condition to my knowledge. Does not have a shifter on it though. PM if interested.
    Any chance you still have it?
    Those Who Stay Will Be Champions

  21. #121
    Join Date
    Aug 2003
    Location
    Arizona
    Posts
    49
    My Cars
    lsx powered....
    I have a brand new fully built LS7 for sale. Will ship direct from the builder(HKE in Texas). PM for details

  22. #122
    Join Date
    Mar 2008
    Location
    Bunker Hill, WV
    Posts
    4,056
    My Cars
    95 M3, 07 Titan, 96 XJ
    Quote Originally Posted by GoBLue View Post
    Any chance you still have it?
    I bought that trans and may be selling it, due to going with a dog box.

    E30 Turbo 2.8L - 60ft - 1.70 :: 1/8th - 6.99 :: MPH - 105.47 :: 1/4 - 10.66 :: MPH - 132.53
    Daily E36 M3 - 60ft - 1.790 :: 1/8th - 8.20 :: MPH - 84.68 :: 1/4 - 12.81 :: MPH - 107.05
    *RIP* E36 M3 - 60ft - 1.944 :: 1/8th - 8.64 :: MPH - 80.00 :: 1/4 - 13.55 :: MPH - 99.95
    Cool2seat's TTstg1 E36 M3 - 60ft - 2.123 :: 1/8th - 8.44 :: MPH - 87.71 :: 1/4 - 12.94 :: MPH - 107.95

  23. #123
    Join Date
    Feb 2009
    Location
    North Jersey
    Posts
    820
    My Cars
    E30 M50/E36 M3/ E39 525i
    looking for:
    T56
    LS6 Intake w fuel rails and injectors
    pm me!
    thanks


  24. #124
    Join Date
    Dec 2003
    Location
    Arlington VA
    Posts
    1,257
    My Cars
    E30 M3
    Quote Originally Posted by rpm620 View Post
    I bought that trans and may be selling it, due to going with a dog box.
    Shoot me a price and condition of it.
    Those Who Stay Will Be Champions

  25. #125
    Join Date
    Nov 2009
    Location
    Auburn, GA
    Posts
    3,574
    My Cars
    Chevy, xBMW's, LS Volvo
    I have OEM blue ls6 valve springs for sale. 2 sets available, brand new. Looking for $55/shipped per set in the continental us.

Page 5 of 13 FirstFirst 12345678910111213 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •