LS6 intake and fuel rail are sold. Injectors and TB are still available.
LS1 GTO front accessory drive system as pictured below. The crank pulley has a lot of surface rust so it is not included in the price however I will ship it if needed.
Accessory drive parts - SOLD
GTO valve covers - SOLD
C5/C6 Corvette crank pulley and crank pulley bolt -$100 (these items are brand new)
Note: none of the prices include shipping.
Last edited by Schitzo; 08-16-2012 at 11:33 PM.
2003 M5 LSx l 6 Spd Manual l 4.10 LSD
Build Thread
The chassis must always be regarded as a means to an end and never as an end itself
those covers... hurm.. gonna do some searching to visualize what they look like... but since you have a pair.. are the gto letters raised or recessed?
2003 X5 4.6is - for sale
2006 X5 L83 5.3 6l80 swapped in progress - for sale
1999 528i 5.7L 4l60e swapped w/ 31 spline 8.8 cobra diff - for sale
2007 ZX-10r - sold
1987 R-10 SWB L83 5.3L 6L80e swapped
www.87chevy.com
The letters are raised.
2003 M5 LSx l 6 Spd Manual l 4.10 LSD
Build Thread
The chassis must always be regarded as a means to an end and never as an end itself
I need a T56 to E36 driveshaft. Anyone have one they want to sell?
Here's an S54 for $2.5k
http://santabarbara.craigslist.org/pts/3242345365.html
(not mine)
And a more complete swap: http://losangeles.craigslist.org/sfv...173406704.html
Last edited by betaflame; 09-05-2012 at 02:44 AM.
I think that is reasonable, but I have not expert in buying these items!
Not really LSx swap parts, but I have a crap load of M3 rear suspension bits if anyone is looking for any conversion bits.
Anyone looking for an LSx wiring harness to be made or buy I just found this skimming through Craigslist. No relation to the seller at all, just scanning the web.
http://albany.craigslist.org/pts/3230838672.html
F.S. 2004 GTO oil pan. comes with the dipstick and pickup. It's in good shape/condition.
Price SOLD
Last edited by Schitzo; 01-20-2013 at 03:29 PM.
2003 M5 LSx l 6 Spd Manual l 4.10 LSD
Build Thread
The chassis must always be regarded as a means to an end and never as an end itself
http://www.realoem.com/bmw/showparts...61&hg=35&fg=05
MOST linkage removed from a V-8 E34, I'm missing the bellcrank at the booster end, #s 4,6 &7.
$50 shipped for the rest of it, #s 11-20.
I also have a few brake boosters and master cyls available cheap.
PM replies I do not frequent this subforum
Last edited by ross1; 09-26-2012 at 03:53 PM.
phoenix arizona, m3 partout, engine and SMG trans:
http://phoenix.craigslist.org/cph/pts/3292036417.html
NOT ME
Hey, I'm switching my setup, most likely selling everything, will separate motor and swap kit. I have an aluminum 5.7 and a t56 trans, would like to sell together, its a complete drop out. My kit is a custom made kit I had a buddy of mine weld together. I plan on having the motor out maybe this up coming weekend, so could get some good pictures, all of the swap pieces are powder coated. The trans x member is obviously for a t56. I also have the exhaust, which would be for a coupe, and requires the spare tire well to be "clearanced" I used the biggest magna flow muffler I could find so it was really quiet. I don't really have an idea on price, I know what other kits go for and admittedly my swap parts aren't nearly as beautiful. I will listen to offers and get pictures up asap.
Asking $1500 for swap stuff. Includes; Mounts, headers, radiator and hoses, heater hoses, hydraboost brake booster and lines, exhaust, probably some other stuff I'm not thinking of.
Motor, trans, ECU, with fast 92 intake $3200. Motor it an aluminum 5.7, fast 92 intake and 92mm throttle body, ecu tuned for intake, vats removed, credits purchased. Transmission is a t56
Price for everything is $4700.
Last edited by ls1bmw; 10-15-2012 at 02:19 PM. Reason: Adding pictures
Motor is sold, T56 and Swap kit still available
Motor is in great shape, has had all scheduled maint. Even have the owners manual documenting services from dealership.
Im 30 minutes south of Atlanta.
Shoot me some offers.
LS1 (stock) engine parts off of an '02 Trans Am with 38k miles on it. All parts are in good working order, no scratches, gouges, etc. Only reason for selling is because I'm doing some mods. More pictures available upon request. I've also got the lifter trays and timing chain that I could throw in.
Stock camshaft - $125
Hydraulic lifters - $100
Push-rods - $30
Springs - $50
Oil pump - $50
Last edited by ckpitt55; 10-26-2012 at 01:07 AM.
E36 LS1 Supercharger
This kit is NOT for "bolt on" guys.
I am deciding if I am going to sell this all together to a BMW guy or split it up and part it out.
This is the entire setup(minus fuel injectors, meth injection and MAP sensor) that I ran on my car. It made 415whp and 460lb/ft, 400lb/ft at just 2000rpm and 460lb/ft at 3500rpm . It fit under the stock e36 sedan hood with my mounts, I can not say it will fit under the hood with other mounts.
This was completely home made by me. Its not off the shelf production quality and wont fit like high dollar production parts, it does however work well. Everything that is painted black could use a fresh coat of paint(I used wrinkle paint) and the supercharger rotors are flaking a bit. All the Lightning guys recommend having the rotors stripped anyway because this happens. These guys strip them for $40. http://www.stiegemeier.com/
There is no gasket for the inlet or supercharger base. I used black RTV, which was also recommended by Steigemeier. You have to use a felpro intake gasket, part# 1312-5 along with the stock intake o-rings.
With the 2.8" pulley it made 11psi which tapers off to around 8psi at redline. Methanol injection is a must at this boost level as there is no inter cooling at all. I ran it at 6psi without methanol with no problem.
Whats included:
supercharger w/ new bypass valve
modular pulley drive with 2.8" pulley
92mm throttle body
Edelbrock fuel rails w/ brackets
Home made s/c inlet
Home made lower intake manifold w/ 2 methanol nozzles
air intake temp sensor
What you will need:
2 bar MAP sensor
fuel injectors(I ran 60#'s)
methanol injection system(recommended)
There is no way I can put a price on this, so I am open to offers. PM me what your are thinking and we can talk about it.
Click for video
Aero quip blue -6 power steering hose. Bought 6 feet and needed only 2.. Sell the remaining 4ft for 28 shipped
http://m.summitracing.com/parts/aer-fcg0606
Clint
2003 X5 4.6is - for sale
2006 X5 L83 5.3 6l80 swapped in progress - for sale
1999 528i 5.7L 4l60e swapped w/ 31 spline 8.8 cobra diff - for sale
2007 ZX-10r - sold
1987 R-10 SWB L83 5.3L 6L80e swapped
www.87chevy.com
Ls1 Engine for sale with accessory drive minus ecm. $1800+ shipping
Motor and Trans sold, just have the swap parts left. Was looking at the car the other day, couple more parts I will include. So total list of parts: Mounts, headers, hydraboost brake booster with all lines, lokar throttle cable, fuel pressure regulator, radiator with lines and fan, heater hoses, and I have a full exhaust for a coupe. $1500
SOLD SOLD
I have a brand new DORMAN stainless clutch line (part # 628221) that I purchased and sent to BRAAP for his modifications including delay valve drilling. This line is brand new never installed with the plastic caps still on the fittings.
$110 shipped
Last edited by SHhhhh; 11-28-2012 at 08:39 PM.
Bookmarks