Conversion Parts For Sale

[mbfinatic]

Selling the following parts that were used on my lsx swap.
vorshlag abs relocation kit
cx racing radiator piping kit to connect to stock radiator. ( I used on it on my mishimoto with no problems)
e36 lsx intake comes with maf sensor and could include a IAT sensor.
two spal 10 inch fans. Worked perfect on my ls1 with a mishimoto radiator
ls1 fuel rails and injectors (good for truck motor swaps) from 04 gto
cx racing e36 lsx swap catback exhaust 3 inch v band connection

message me for price

[AdamE36M]

i have a wiring specialties e36 ls1 swap harness for sale. Comes with their flashed ecu, the coolant setup for the stock gauge, and the adapter oil pressure sensor. Only modification to the harness is the maf wires were extended to run the intake on the passenger side. Also comes with electric fan with plug wired to work with pcm
looking to get $950 or best offer
also have the rest of the full swap kit pulled from my completed swap
steel driveshaft with jtr flange and t56 yoke: $400
jtr headers painted with ceramic header paint: $400
vorshlag power steering kit:200
vorshlag t56 throw out bearing and aluminum master cylinder: $400
replica vorshlag motor and trans mounts. Trans mount has sent from speed bump but still works: $400

shipping to be determined

bump

[nsogiba]

LS1 Corvette intake manifold for sale

NO EGR port.
MAP sensor clip is in perfect condition, comes bare with NO rails or injectors.
Only removed to do an LS6 intake swap.

Perfect working condition, just needs to be wiped down. Great for a swap car, custom project, etc.

$120 picked up in 14086
$150 shipped

Please call or text 716 949 seven 4 two 4 or PM me

_DSC4975 by Norbert Ogiba, on Flickr

_DSC4974 by Norbert Ogiba, on Flickr

_DSC4976 by Norbert Ogiba, on Flickr

_DSC4979 by Norbert Ogiba, on Flickr

_DSC4980 by Norbert Ogiba, on Flickr

[squashman702]

Selling the following parts that were used on my lsx swap.
vorshlag abs relocation kit
cx racing radiator piping kit to connect to stock radiator. ( I used on it on my mishimoto with no problems)
e36 lsx intake comes with maf sensor and could include a IAT sensor.
two spal 10 inch fans. Worked perfect on my ls1 with a mishimoto radiator
ls1 fuel rails and injectors (good for truck motor swaps) from 04 gto
cx racing e36 lsx swap catback exhaust 3 inch v band connection

message me for price

Can you send me a price on the ABS relo kit and the E36 intake?

[sdobart]

I have vorshlag headers for sale with vbands welded on. 1 clamp included, the other clamp got bent in storage. So you'd need 1 entire assembly (2 flanges and 1 clamp) to complete your exhaust with these headers. They have slight indentations where the mandrels bent them but this is barely noticeable and does not affect performance. I also slightly dented one of the primaries near the collector to clear the FCAB. - $1200 OBO

Also have Spec Stage 3+ clutch and pressureplate w/ 15k miles (no flywheel) - $250 OBO

WIll post pics of both tomorrow. Probably have more swap parts as well.

[AdamE36M]

I have a wiring specialties e36 ls1 swap harness for sale. Comes with their flashed ecu, the coolant setup for the stock gauge, and the adapter oil pressure sensor. Only modification to the harness is the maf wires were extended to run the intake on the passenger side. Also comes with electric fan with plug wired to work with pcm
Looking to get $950 or best offer
Also have the rest of the full swap kit pulled from my completed swap
Steel driveshaft with jtr flange and t56 yoke: $400
Jtr headers painted with ceramic header paint: sold
Vorshlag power steering kit:200
Vorshlag t56 throw out bearing and aluminum master cylinder: $400
Replica vorshlag motor and Trans mounts. Trans mount has sent from speed bump but still works: $400

Shipping to be determined

Bump

[StolenFox]

I've got a good used GTO oil pan assembly for sale. Comes complete and is clean and ready for your swap project. I bought it to use in my E28 swap but I've sold that car and am now building a E39. This pan is great for E28's or V8 subframe E39's. Got it on EBay right now, can be found here:

http://www.ebay.com/itm/201589007745...84.m1555.l2649

Thanks!
S.F.

[squashman702]

I have a couple of items available:

EDIT: Everything sold

[KarlSpackler]

http://www.bimmerforums.com/forum/sh...LS1-Long-Block

NICE Engine to start with. Should make 430 rwph with LS6 intake and other parts

[squashman702]

LS1 flywheel still available, mounts and L33 harness sold.

[dungdn93]

I bought it from a guy that never wronged me before . I was told I needed a 260 for a OD trans and just got it

[squashman702]

Also have a GTO T56 shifter and shift rail available- SOLD.

[James39]

LS6 intake, 42lb injectors (8.1 marine/truck connectors), Professional Products fuel rail.


Separated:

LS6 Intake (Bolts included, no head port gaskets) - $420 shipped

42lb marine Injectors - $210 shipped

Professional Products Powerflow Fuel rail / crossover line - $60 shipped

[squashman702]

Selling my NAHR E36 swap stuff.

I have the LS swap headers available. Would like to sell as a package. Previous owner used them for a couple of track events then went to a different setup (forced induction I believe). I only mocked them up in my car and have not run it.

These headers retail for $1400, looking for $679 or best offer. Will take partial trades for E36 suspension pieces or for Sparco/Recaro/etc buckets (looking for coilovers mainly, but could be interested in a spring/shock kit). I can send pictures to anyone interested.

Edited, pictures added:

[pMak26]

Ls1 coil harness, right and left sides. sold

Stock F-body shifter, $70 shipped:

[AdamE36M]

I have a wiring specialties e36 ls1 swap harness for sale. Comes with their flashed ecu, the coolant setup for the stock gauge, and the adapter oil pressure sensor. Only modification to the harness is the maf wires were extended to run the intake on the passenger side. Also comes with electric fan with plug wired to work with pcm
Looking to get $950 or best offer
Also have the rest of the full swap kit pulled from my completed swap
Steel driveshaft with jtr flange and t56 yoke: $400
Jtr headers painted with ceramic header paint: $400
Vorshlag power steering kit:200
Vorshlag t56 throw out bearing and aluminum master cylinder: $400
Replica vorshlag motor and Trans mounts. Trans mount has sent from speed bump but still works: $400

Shipping to be determined

headers are sold everything else still available

[pMak26]

I have a brand new LSx starter for sale. I bought it for a friends build, then left it at my house like an idiot. Wasn't going to drive 2.5hrs to go get it so bought another one local.

My idiotness, your gain.
It's smaller than stock for better clearance:
SOLD

[Fastfreddy77]

Motor mounts for LS into v8 e39. Made by bmwman528e. Paid $400, asking $300. For Faster response, email me directly.. Grand_national87@hotmail.com

[squashman702]

GTO T56 shifter and shift rail- SOLD

[Thee Antic]

I have a 80k F-body T56 with bellhousing, hydraulic throwout and BNIB MGW shifter. - Asking 1700

I also have a ~100k 3.91 LSD in good working order with new seals, red line fluid, crush washers and m3 flanges included. - Asking 450

And lastly I have a freshly built LQ9, done by my machinist to spec, with ARP hardware. Has a SNS torquemax stage 2 cam. Very torquey, specced for an e36. 0 miles, never installed. Still at the machine shop. - Asking 3500

[KarlSpackler]

http://ls1tech.com/forums/parts-clas...l#post19434063

Heads/cam LS1 long block. Great starting point

JUST SOLD!!!!!!!!!!!!!!!!!!
SOLD
SOLD
SOLD
SOLD

[jon volk]

Built T56 with RXT twin disc and fluid pump $2400obo in CT

newhaven.craigslist.org/pts/5853054475.html

- - - Updated - - -

T56 shift lever made to center in the console and take a stock BMW knob.

$50 shipped

[2Fass240us]

I have vorshlag headers for sale with vbands welded on. 1 clamp included, the other clamp got bent in storage. So you'd need 1 entire assembly (2 flanges and 1 clamp) to complete your exhaust with these headers. They have slight indentations where the mandrels bent them but this is barely noticeable and does not affect performance. I also slightly dented one of the primaries near the collector to clear the FCAB. - $1200 OBO

Also have Spec Stage 3+ clutch and pressureplate w/ 15k miles (no flywheel) - $250 OBO

Will post pics of both tomorrow. Probably have more swap parts as well.

Are these still available? I'll shoot you a PM too.

-Andy

[Mrme4u]

Are these still available? I'll shoot you a PM too.

-Andy

Pictures will be handy


Sent from my SM-N9005 using Tapatalk

[Mrme4u]

SOLD!


Up for sale is my Tilton (Sonic) Bellhousing, clutch/pp/flywheel/TOB , and reverse mount starter setup that was mounted to my e30/LS1 build with a TKO 600 RR transmission. This was sold as a kit through Coleman Racing (part # 20949). It will work with TKO and other similar 4 bolt transmissions with the same spline count.

http://www.colemanracing.com/Driveli...ter-P3610.aspx

The kit includes the follow:
•Sonic Bellhousing for LS (maybe other?) blocks.
•Sonic/Tilton lightweight flywheel
•Sonic/Tilton 3 disk clutch/pressure plate setup
•Extra set of clutch disks
•Tilton hydraulic throwout bearing
•Tilton reverse mount starter

I installed this in my BMW e30/LS1 Racecar, and attended 1 track day to shake down all the changes I had made. The only time since it has had any use was moving the car in and out of the garage to make room to work on other projects. The clutch disks have virtually no wear! My racecar has sat, and I ended up pulling the motor or another project. I had hopes of resurrecting the racecar but as time has set in, the racecar just needs to go away – so parts are going up for sale.

I've got over $1900 invested, I'd like to get $1300 (shipped conus) out of this sale. If someone is interested and doesn't want the spare clutch disks, I'll separate those.

I am interested in the clutch

Sent from my SM-N9005 using Tapatalk