Selling the following parts that were used on my lsx swap.
vorshlag abs relocation kit
cx racing radiator piping kit to connect to stock radiator. ( I used on it on my mishimoto with no problems)
e36 lsx intake comes with maf sensor and could include a IAT sensor.
two spal 10 inch fans. Worked perfect on my ls1 with a mishimoto radiator
ls1 fuel rails and injectors (good for truck motor swaps) from 04 gto
cx racing e36 lsx swap catback exhaust 3 inch v band connection
message me for price
Last edited by mbfinatic; 03-31-2016 at 02:44 PM.
LS1 Corvette intake manifold for sale
NO EGR port.
MAP sensor clip is in perfect condition, comes bare with NO rails or injectors.
Only removed to do an LS6 intake swap.
Perfect working condition, just needs to be wiped down. Great for a swap car, custom project, etc.
$120 picked up in 14086
$150 shipped
Please call or text 716 949 seven 4 two 4 or PM me
_DSC4975 by Norbert Ogiba, on Flickr
_DSC4974 by Norbert Ogiba, on Flickr
_DSC4976 by Norbert Ogiba, on Flickr
_DSC4979 by Norbert Ogiba, on Flickr
_DSC4980 by Norbert Ogiba, on Flickr
I have vorshlag headers for sale with vbands welded on. 1 clamp included, the other clamp got bent in storage. So you'd need 1 entire assembly (2 flanges and 1 clamp) to complete your exhaust with these headers. They have slight indentations where the mandrels bent them but this is barely noticeable and does not affect performance. I also slightly dented one of the primaries near the collector to clear the FCAB. - $1200 OBO
Also have Spec Stage 3+ clutch and pressureplate w/ 15k miles (no flywheel) - $250 OBO
WIll post pics of both tomorrow. Probably have more swap parts as well.
Last edited by sdobart; 04-05-2016 at 12:47 AM.
96 M3 | Forged LSx | Twin S366 | Injector Dynamics | E85 | AEM Infinity
90 Schwarz 325i
IG : sdobart
I've got a good used GTO oil pan assembly for sale. Comes complete and is clean and ready for your swap project. I bought it to use in my E28 swap but I've sold that car and am now building a E39. This pan is great for E28's or V8 subframe E39's. Got it on EBay right now, can be found here:
http://www.ebay.com/itm/201589007745...84.m1555.l2649
Thanks!
S.F.
I have a couple of items available:
EDIT: Everything sold
Last edited by squashman702; 06-30-2016 at 08:59 AM.
http://www.bimmerforums.com/forum/sh...LS1-Long-Block
NICE Engine to start with. Should make 430 rwph with LS6 intake and other parts
I'm a ROLEX wear'N
Diamond ring wear'N
KISS steal'n
WHEELIN DEAL'N
Limousine RIDE'N
JET PLANE FLY'N , SON OF A GUN!
And I'm havin a hard time holdin these alligators down!!!!!!
WHOOOOOO!!!!!!
LS1 flywheel still available, mounts and L33 harness sold.
Last edited by squashman702; 07-18-2016 at 09:47 AM.
I bought it from a guy that never wronged me before . I was told I needed a 260 for a OD trans and just got it
Also have a GTO T56 shifter and shift rail available- SOLD.
Last edited by squashman702; 10-11-2016 at 09:02 AM.
LS6 intake, 42lb injectors (8.1 marine/truck connectors), Professional Products fuel rail.
Separated:
LS6 Intake (Bolts included, no head port gaskets) - $420 shipped
42lb marine Injectors - $210 shipped
Professional Products Powerflow Fuel rail / crossover line - $60 shipped
'99 BMW 540i6 L33 5.3, PRC Heads, E-force supercharged
http://forums.bimmerforums.com/forum....php?t=1674320
Selling my NAHR E36 swap stuff.
I have the LS swap headers available. Would like to sell as a package. Previous owner used them for a couple of track events then went to a different setup (forced induction I believe). I only mocked them up in my car and have not run it.
These headers retail for $1400, looking for $679 or best offer. Will take partial trades for E36 suspension pieces or for Sparco/Recaro/etc buckets (looking for coilovers mainly, but could be interested in a spring/shock kit). I can send pictures to anyone interested.
Edited, pictures added:
Last edited by squashman702; 11-28-2016 at 12:50 PM. Reason: Price drop
I have a brand new LSx starter for sale. I bought it for a friends build, then left it at my house like an idiot. Wasn't going to drive 2.5hrs to go get it so bought another one local.
My idiotness, your gain.
It's smaller than stock for better clearance:
SOLD
Last edited by pMak26; 09-13-2016 at 09:18 AM.
Motor mounts for LS into v8 e39. Made by bmwman528e. Paid $400, asking $300. For Faster response, email me directly.. Grand_national87@hotmail.com
GTO T56 shifter and shift rail- SOLD
Last edited by squashman702; 10-11-2016 at 09:04 AM.
I have a 80k F-body T56 with bellhousing, hydraulic throwout and BNIB MGW shifter. - Asking 1700
I also have a ~100k 3.91 LSD in good working order with new seals, red line fluid, crush washers and m3 flanges included. - Asking 450
And lastly I have a freshly built LQ9, done by my machinist to spec, with ARP hardware. Has a SNS torquemax stage 2 cam. Very torquey, specced for an e36. 0 miles, never installed. Still at the machine shop. - Asking 3500
Last edited by Thee Antic; 10-30-2016 at 09:40 AM.
http://ls1tech.com/forums/parts-clas...l#post19434063
Heads/cam LS1 long block. Great starting point
JUST SOLD!!!!!!!!!!!!!!!!!!
SOLD
SOLD
SOLD
SOLD
Last edited by KarlSpackler; 10-26-2016 at 10:57 AM.
I'm a ROLEX wear'N
Diamond ring wear'N
KISS steal'n
WHEELIN DEAL'N
Limousine RIDE'N
JET PLANE FLY'N , SON OF A GUN!
And I'm havin a hard time holdin these alligators down!!!!!!
WHOOOOOO!!!!!!
95 M3, 5.3 LS, PTE 7675CEA, TH400/Gear Vendors OD
10.4@136 Pump gas at 3530lbs.
Build thread
http://www.bimmerforums.com/forum/sh...LS-Turbo-build
Bookmarks