The only flares I like on an E21: http://stancewords.stanceworks.netdn...e-gruppe-5.jpg
'81 E21 320i / '90 E30 325i / '̶9̶2̶ ̶E̶3̶4̶ ̶5̶2̶5̶i̶t (sold) / '15 Toyota XW30 / '̶̶8̶0̶ ̶E̶2̶1̶ ̶3̶2̶0̶i̶A̶ (sold)
You can still buy the e30 m3 sheet metal straight from bmw. The only tough part is getting one of the rear quarter panels unless you have an e30 m3 vin. My friend is turning his e30 into an m3 the right way and bought every piece new. Including the rear window/c-pillar area. I remember him saying he had to find a german importing company willing to buy the remaining quarter panel from bmw and ship it to him since bmw wouldn't sell it to him directly without an e30 m3 vin.
Here is the posted pic!!! OMG I am totally in love with this car!!! I'm trying to get hold of this builder/owner for some tips......gonna be hard but we will see....
- - - Updated - - -
I was looking for the E30 M3 panels and I found the front fenders here in Vegas, but after closer look and calculations......it just wouldn't work
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
I believe there used to be a bodykit made, but it was a long time ago... Someone I knew had a white e21 323i with that kit installed. His car looked just like the one on the photo above. He also had M stripes painted across the whole car.
I was back in the early 90's and I do not know who made the kit or where he got it.
Max
I found these on ebay and didn't remember seeing them mentioned here before. Smaller but sheet metal.
http://www.ebay.com/itm/NEW-set-for-...3D182232482174
I see.... Hmmmmmmmm..... I went to SEMA couple weeks ago.... Every other car had fender flares.... Left a little bad taste..... So I personally wanna go the E30 M3 way.... 85 Audi quatro has em too....
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
Past, Present, and Future
1974 BMW 2002tii (RIP)
1995 BMW 325is w/ FULL S50 swap, track prepped (SOLD)
1988 BMW 325ix Zinno/Black (RIP)
1988 BMW 325ix Alpine/Black (Sold)
1988 BMW 535is Alpine/Pacific Blue (Going Away...)
1982 BMW 323i (Current Project/Paper Weight)
2003 BMW 325i Sport Touring (Daily Driver)
Thnx brother...I will do my best.....
- - - Updated - - -
So here is an unexpected scoop!!!!!!!!
Ready for this?!?!?!?!?! I think I just stumbled on a deal of a century at least to me!!!!
What if I told you I saw this:
And I believe I can get it for under $2K ??? Yes, 2000 bucks..... It's in running condition but it will need TLC and couple parts.....128K miles...1991 850i .....auto......
If I get it you know what will be next right?!?!?!?! ahhahahahahaha
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
Don't tell everyone!!!!!
Sent from my SM-G930R4 using Tapatalk
I say leave the V12 in the front engine position, but balance out the weight distribution with another one in the trunk.
Bringing new meaning to dual turbo!
-John
And after 6 weeks of waiting for the custom pulley from RMS Van Nuys CA.....I got the wrong size pulley!! They send me an 8" and I need a 10 inch....what a disappointment I tell ya !! Kinda pissed off......called them, told em to pull up the emails ref the size and 3 week wait time and the guy was baffled.....has no clue how things went this wrong. Well, he told me he's call me back tomorrow, Friday.....so we will see how fast they can make this custom crank pulley?!?!?!?
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
Is that a picture of Amirs backyard already?
'81 E21 320i / '90 E30 325i / '̶9̶2̶ ̶E̶3̶4̶ ̶5̶2̶5̶i̶t (sold) / '15 Toyota XW30 / '̶̶8̶0̶ ̶E̶2̶1̶ ̶3̶2̶0̶i̶A̶ (sold)
Hahahahahaha! How did you guess? It's not backyard, it's the sideyard sir
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
Still waiting on the pulley!!!!!!!! Spoke to the owner last week about it......Miller WAR chip is scheduled to be delivered today.....I had to send it in cause I bought it on eBay as a new never installed and it had files missing and wouldn't boot up! So Miller in Canada kindly took a look at it so as soon as it gets here I will post pics
Now as soon as the pulley shown up, here we go, back to fab work!!!!!
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
OK Cool!!! WAR chip is here!!! Got it yesterday.....And I got a phone call that the pulley was done and mailed today!!!! Sweet!! Can't wait....it's been too long!!
Last edited by lasvegascop; 08-25-2017 at 03:38 PM.
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
Any updates?
-John
Always FUN TO DRIVE - Build Thread & Tech info - 79 320/6 track car build thread -- Videos of track car -Adam in car Auto-x video - Start-up video - 4/2011 Adam's TOP BMW time San Diego BMWCCA - 4-5-15 Dyno break-in run new M20B25 - Exhaust Thread - Link
3 Months and no updates......what is going on here ???
This is not like you bro, cmon, the world is waiting.
Bimmerod
Right?!?!?!?!?!!?
So I am still waiting for the pulley!!! I call once a week and I get the same thing....it's on the lathe and we'll send it out Friday....It's been months now!!! Good workmanship, shitty timing!!!
I'm a tiny bit disappointed to be honest!
Also, it's getting hot in Vegas...this week's supposed to be 116....so there ya have it. This weekend I am running to Beverly Hills and their Father's day Rodeo Dr annual CONCOURS D’ ELEGANCE
car show..
I try to make it there every year but things come up......this weekend, I am in!!!!! One year, 2005 I made the show with my car.....I had the blast of a lifetime....Met Jay Leno
http://rodeodrive-bh.com/event/rodeo...rs-d-elegance/
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
So it appears Photobucket is holding everyone's pictures hostage!!!!!!!!!!!!!! hahahahah....wow...I foresee a lawsuit coming up on this...unbelievable guys...all the pics...100's of them, you can't see them unless you pay $400 a year!!! No way....I don't think anyone will....how sad, huh????
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
Last edited by epmedia; 07-11-2017 at 03:20 AM.
Tbd
My buddy Big A found a solution!!!!! YESSSSSSSSSSSSSSSSS and it works!!! Here is the link....... install it the relaunch the site.....bam...done!
https://chrome.google.com/webstore/d...fegnfnflicjjgj
My build thread M20 than S50 into 320i: http://forums.bimmerforums.com/forum...0#post23442810
Bookmarks