Page 17 of 18 FirstFirst ... 789101112131415161718 LastLast
Results 401 to 425 of 441

Thread: E39 I6 LS Swap kit

  1. #401
    Join Date
    May 2010
    Location
    Salem, OR
    Posts
    2,503
    My Cars
    2000 BMW 528
    Quote Originally Posted by 2000 548 View Post
    Hi, please send me a quote for a kit. I have a t6060 trans. from a 2012 camaro, the only thread I found on using this trans. showed a need to cut the floor for the shifter. If this is necessary I may use a T56. Are there any aftermarket shifters that would work, or is it that the trans. is too tall? What exhaust manifolds are you recommending now that you aren't making headers? Let me know, thanks. paulmcurran@gmail.com I can wait for a group buy if that helps you.
    I'm not sure about the tr6060. I know my transmission mount won't work with the 6060.
    If you decide to go t56 get ahold of Lantz. I don't have any t56 sets in stock.
    As far as headers/manifolds, I have no leads. I've heard there are options but never got part numbers.

    Let me know if you have any questions

  2. #402
    Join Date
    Jul 2009
    Location
    Washington
    Posts
    336
    My Cars
    BMW 525i
    I still have one set left. I went the T56 magnum route. The T56 magnum is the new aftermarket version of the tr6060 that can handle up to 700 hp stock and has the benefits of the newer tr6060 design.

    You should be able to run stock truck manifolds I believe. I don’t think there are options for long tubes.


    Sent from my iPhone using Tapatalk
    Last edited by Lantz; 05-30-2019 at 11:37 PM.
    2002 BMW 525i - 6.6L LS Turbo Swap
    Follow me on Instagram at @LantzFab
    Link to LantzFab.com
    Link to my Facebook page
    Link to my build page

  3. #403
    Join Date
    Oct 2014
    Location
    sunderland ma
    Posts
    11
    My Cars
    2000 bmw 540 sport wagon
    Hi, what is it that you have 1 left? Transmission or mount kit? Let me know here or send me an email. Thanks, Paul paulmcurran@gmail.com

  4. #404
    Join Date
    Oct 2014
    Location
    sunderland ma
    Posts
    11
    My Cars
    2000 bmw 540 sport wagon
    Thanks JF, I have a kit coming from lantz. Questions on proceeding: I need a 6 cyl. front crossmember to put in my E39 540i V8. Looks like all of these 6 cyl. ones are the same? Not clear how many parts I need, crossmember, steering rack with tie rods, control arms (upper & lower)? Shocks, What else? Should be able to find off 1 car, where to look, what should I have to pay? You mentioned someone found headers from Summit that fit, anyone have info on those?? I'm sure there will be more questions, thanks for the help, Paul

  5. #405
    Join Date
    May 2010
    Location
    Salem, OR
    Posts
    2,503
    My Cars
    2000 BMW 528
    Quote Originally Posted by 2000 548 View Post
    Thanks JF, I have a kit coming from lantz. Questions on proceeding: I need a 6 cyl. front crossmember to put in my E39 540i V8. Looks like all of these 6 cyl. ones are the same? Not clear how many parts I need, crossmember, steering rack with tie rods, control arms (upper & lower)? Shocks, What else? Should be able to find off 1 car, where to look, what should I have to pay? You mentioned someone found headers from Summit that fit, anyone have info on those?? I'm sure there will be more questions, thanks for the help, Paul

    Any subframe will fit, any year range. You'll need the whole assembly though, subframe, control arms and shocks.
    I paid $200 for a subframe with a rack, lower control arms and tie rods.

    I don't have any information on the headers, never got part numbers.

  6. #406
    Join Date
    Oct 2014
    Location
    sunderland ma
    Posts
    11
    My Cars
    2000 bmw 540 sport wagon
    Hi Josh, I received one of your motor mount kits though lanz today, great looking pieces, nice work. They look beefy enough o hold up a building! Thanks. What rubber motor mounts do you recommend?

  7. #407
    Join Date
    May 2010
    Location
    Salem, OR
    Posts
    2,503
    My Cars
    2000 BMW 528
    Quote Originally Posted by 2000 548 View Post
    Hi Josh, I received one of your motor mount kits though lanz today, great looking pieces, nice work. They look beefy enough o hold up a building! Thanks. What rubber motor mounts do you recommend?
    I run Z8 mounts. They fit in stock locations but seem to be a little more rigid rubber. You can use stock E39 ones as well.

  8. #408
    Join Date
    Apr 2019
    Location
    PALMER,MA
    Posts
    2
    My Cars
    2009 BMW 335 XDRIVE Seda
    Hello, new to the forum. I have a 2000 540 6-speed that im planning on doing an LS1 swap in. I will be putting in the front suspension/crossmember and steering rack from a 530 in it. Will these mount work since i will be using my 6-speed tranny, not a t56?

  9. #409
    Join Date
    May 2010
    Location
    Salem, OR
    Posts
    2,503
    My Cars
    2000 BMW 528
    Quote Originally Posted by ONLYBIMMERS View Post
    Hello, new to the forum. I have a 2000 540 6-speed that im planning on doing an LS1 swap in. I will be putting in the front suspension/crossmember and steering rack from a 530 in it. Will these mount work since i will be using my 6-speed tranny, not a t56?
    The engine mounts should work, you'd probably have to make a transmission mount though.

  10. #410
    Join Date
    Apr 2019
    Location
    PALMER,MA
    Posts
    2
    My Cars
    2009 BMW 335 XDRIVE Seda
    Ok, it will be a while till I do the swap, I'm just doing all my research now. I plan on doing a TT setup so it should be a fun project. Do you know if anyone makes a harness kit for e39 anymore or do I have to custom wire it?

  11. #411
    Join Date
    Jul 2018
    Location
    Louisiana
    Posts
    198
    My Cars
    Bmw E39 528i
    if we got enough ppl to do a batch of headers would u be down. ik they take alot of work but the price is urs to set. or atleast the bends and cuts of the piping.

  12. #412
    Join Date
    May 2010
    Location
    Salem, OR
    Posts
    2,503
    My Cars
    2000 BMW 528
    Quote Originally Posted by mrallande5020 View Post
    if we got enough ppl to do a batch of headers would u be down. ik they take alot of work but the price is urs to set. or atleast the bends and cuts of the piping.
    Unfortunately with my current work schedule I just won't be able to make this work.
    I'd much rather build headers and swap parts day in/day out. Haha

  13. #413
    Join Date
    May 2019
    Location
    Everywhere
    Posts
    1
    My Cars
    E39 530i

    E39 ls swap

    Greetings . I'm new to the threads and I don't know how to PM you JF . May I ask you to contact me at my Email . its : hamoud.mn@hotmail.com
    Thank you for your time .

  14. #414
    Join Date
    Oct 2014
    Location
    sunderland ma
    Posts
    11
    My Cars
    2000 bmw 540 sport wagon
    What style accessories (p/s, a/c, alt., etc.) fit best with JF mounts. I know there are several options. Thanks.

  15. #415
    Join Date
    Jul 2009
    Location
    Washington
    Posts
    336
    My Cars
    BMW 525i
    Quote Originally Posted by 2000 548 View Post
    What style accessories (p/s, a/c, alt., etc.) fit best with JF mounts. I know there are several options. Thanks.
    Depends on what your doing. If you are going turbo I would do corvette style. In my opinion it gives you the most options. Check out my build thread if doing turbo. I tried to document spacing for others and what I ran into.

    Non turbo I think anything fits besides truck.


    Sent from my iPhone using Tapatalk
    2002 BMW 525i - 6.6L LS Turbo Swap
    Follow me on Instagram at @LantzFab
    Link to LantzFab.com
    Link to my Facebook page
    Link to my build page

  16. #416
    Join Date
    May 2019
    Location
    Dallas Tx
    Posts
    1
    My Cars
    I own many
    Hi, JesusFreak or anyone, I'm desperately looking for LS motor mounts in to E39. I have money and will pay immediately. Does anyone have a set or knows where I can get a hold of one? Please and thank you. I can be reached at Eengineering@protonmail.com... thank you!

  17. #417
    Join Date
    May 2010
    Location
    Salem, OR
    Posts
    2,503
    My Cars
    2000 BMW 528
    Quote Originally Posted by EEngineering View Post
    Hi, JesusFreak or anyone, I'm desperately looking for LS motor mounts in to E39. I have money and will pay immediately. Does anyone have a set or knows where I can get a hold of one? Please and thank you. I can be reached at Eengineering@protonmail.com... thank you!
    Email sent

  18. #418
    Join Date
    Jun 2019
    Location
    Lake Charles, LA
    Posts
    1
    My Cars
    1999 528I Wagon
    Quote Originally Posted by Jesus Freak View Post
    Email sent
    Jesus Freak, I would also like to get a set of those mounts please. Can you email me nhssdf4@gmail.com?

  19. #419
    Join Date
    Mar 2018
    Location
    Maryland
    Posts
    3
    My Cars
    E39
    Could I do corvette style with a LQ4?

  20. #420
    Join Date
    Jun 2004
    Location
    jackson, n.j.
    Posts
    350
    My Cars
    95 m3 coupe
    Quote Originally Posted by TrynaLQ4swapE39 View Post
    Could I do corvette style with a LQ4?
    Yes, you obviously need all Corvette accessories and brackets as well as harmonic balancer.

  21. #421
    Join Date
    Jul 2019
    Location
    Fort Payne AL
    Posts
    1
    My Cars
    2003 525
    Price on a kit please nathanshunter@aol.com
    Last edited by Nhunter; 07-16-2019 at 08:29 PM.

  22. #422
    Join Date
    Jul 2019
    Location
    North Carolina
    Posts
    1
    My Cars
    01 525i
    Hello ... do you still make swap brackets?

  23. #423
    Join Date
    May 2010
    Location
    Salem, OR
    Posts
    2,503
    My Cars
    2000 BMW 528
    Quote Originally Posted by Noxmol View Post
    Hello ... do you still make swap brackets?
    Yes. Pm or email me @ jfreak2006@hotmail.com

  24. #424
    Join Date
    Sep 2011
    Location
    PA
    Posts
    29
    My Cars
    2003 540iT/6
    Pls send price list to scottpers at Gmail dot com. I have 2000 528iT.

  25. #425
    Join Date
    Nov 2019
    Location
    Tacoma
    Posts
    68
    My Cars
    740i , F350
    Do you make any mounts for E38s? I’m starting a LQ9 swap into 740i but really don’t wanna tackle the engine and trans mounts. Do you or know anyone making them at the moment?

Page 17 of 18 FirstFirst ... 789101112131415161718 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •