So i noticed my kit came with what appears to be two spacers. Are these to be used on the engine mounts? My autokraft pan is resting on the steering rack with the current setup.
The spacers are to be used with the T56 transmission mount.
I recommend using Z8 engine mounts, part # 22116750820
They seem to be a little more firm than the stock isolators. That's what I used when I designed the mounts.
Or you could sand/grind the ribs on the rack down.
Hey Bud. I have a 2001 530I and was pondering if you still made swap kits? Thanks in advance!
Yes I still make the motor mounts, no headers or other bits.
Feel free to message me here or email me @ jfreak2006@hotmail.com
Are you still building these kits looking to ls swap my e39 530i
Yes I still make the motor mounts, no headers or other bits.
Feel free to message me here or email me @ jfreak2006@hotmail.com
Just sent you a PM regarding parts for a LS/Trans swap into my dead tired 525. Any tips or info that would help this swap go smoothly would be appreciated.
Thanks!!
any kits available?
Email sent for motor mounts
Bookmarks