I'm not sure about the tr6060. I know my transmission mount won't work with the 6060.
If you decide to go t56 get ahold of Lantz. I don't have any t56 sets in stock.
As far as headers/manifolds, I have no leads. I've heard there are options but never got part numbers.
Let me know if you have any questions
I still have one set left. I went the T56 magnum route. The T56 magnum is the new aftermarket version of the tr6060 that can handle up to 700 hp stock and has the benefits of the newer tr6060 design.
You should be able to run stock truck manifolds I believe. I don’t think there are options for long tubes.
Sent from my iPhone using Tapatalk
Last edited by Lantz; 05-30-2019 at 11:37 PM.
2002 BMW 525i - 6.6L LS Turbo Swap
Follow me on Instagram at @LantzFab
Link to LantzFab.com
Link to my Facebook page
Link to my build page
Hi, what is it that you have 1 left? Transmission or mount kit? Let me know here or send me an email. Thanks, Paul paulmcurran@gmail.com
Thanks JF, I have a kit coming from lantz. Questions on proceeding: I need a 6 cyl. front crossmember to put in my E39 540i V8. Looks like all of these 6 cyl. ones are the same? Not clear how many parts I need, crossmember, steering rack with tie rods, control arms (upper & lower)? Shocks, What else? Should be able to find off 1 car, where to look, what should I have to pay? You mentioned someone found headers from Summit that fit, anyone have info on those?? I'm sure there will be more questions, thanks for the help, Paul
Hi Josh, I received one of your motor mount kits though lanz today, great looking pieces, nice work. They look beefy enough o hold up a building! Thanks. What rubber motor mounts do you recommend?
Hello, new to the forum. I have a 2000 540 6-speed that im planning on doing an LS1 swap in. I will be putting in the front suspension/crossmember and steering rack from a 530 in it. Will these mount work since i will be using my 6-speed tranny, not a t56?
Ok, it will be a while till I do the swap, I'm just doing all my research now. I plan on doing a TT setup so it should be a fun project. Do you know if anyone makes a harness kit for e39 anymore or do I have to custom wire it?
if we got enough ppl to do a batch of headers would u be down. ik they take alot of work but the price is urs to set. or atleast the bends and cuts of the piping.
Greetings . I'm new to the threads and I don't know how to PM you JF . May I ask you to contact me at my Email . its : hamoud.mn@hotmail.com
Thank you for your time .
What style accessories (p/s, a/c, alt., etc.) fit best with JF mounts. I know there are several options. Thanks.
Depends on what your doing. If you are going turbo I would do corvette style. In my opinion it gives you the most options. Check out my build thread if doing turbo. I tried to document spacing for others and what I ran into.
Non turbo I think anything fits besides truck.
Sent from my iPhone using Tapatalk
2002 BMW 525i - 6.6L LS Turbo Swap
Follow me on Instagram at @LantzFab
Link to LantzFab.com
Link to my Facebook page
Link to my build page
Hi, JesusFreak or anyone, I'm desperately looking for LS motor mounts in to E39. I have money and will pay immediately. Does anyone have a set or knows where I can get a hold of one? Please and thank you. I can be reached at Eengineering@protonmail.com... thank you!
Jesus Freak, I would also like to get a set of those mounts please. Can you email me nhssdf4@gmail.com?
Could I do corvette style with a LQ4?
Price on a kit please nathanshunter@aol.com
Last edited by Nhunter; 07-16-2019 at 08:29 PM.
Hello ... do you still make swap brackets?
Yes. Pm or email me @ jfreak2006@hotmail.com
Pls send price list to scottpers at Gmail dot com. I have 2000 528iT.
Do you make any mounts for E38s? I’m starting a LQ9 swap into 740i but really don’t wanna tackle the engine and trans mounts. Do you or know anyone making them at the moment?
Bookmarks