What is the best way to tell if cam or VANOS timing is off? The reason i ask is because i did the whole install myself and sometimes i feel low on power esp. in the low end. Could this be because of my Track Pipe (i heard it could do that)....i also do not have software programmed for it or my exhaust.
Last edited by ///M3///M5; 02-05-2004 at 12:18 AM.
"We are the music makers...and we are the dreamers of dreams."
Do you have a CE light? If not, chances are the VANOS is fine. Try unplugging the VANOS electrical connector and drive around. If it's currently functioning, you'll defnitely notice a difference.
2007 Porsche GT3
2004 Honda S2000 Silverstone
1998 BMW M3/4
M3 SEDAN CLUB #22
Have a 95 E36 with M50 motor with a single vanos, can you tell me if it's possible to replace the bearings and spacer in this vanos.
If your vanos timing is off, the ECU will throw a check engine light immediately.
'03 911 Turbo 6MT fun car
'18 Toyota Land Cruiser Daily driver/Ski Machine/Off Roader
'15 Cayenne Diesel Wife's DD
'17 KTM 690 "Adv" 2 wheeled Adventurer
Take a look on Beisan Systems website they got all kinds of good info.
Bookmarks