Is anyone aware of a shop that keeps a stock of helper springs on hand? I recently got my new suspension but they didn't include any helper springs (among my missing camber plates as well) so I am looking for some 60mm around 50-100 lb/in at 2-3" extended and 1-2" compressed. Currently at full droop on my front strut with the height adjuster at the top 3/4 I have about an inch to an inch and a half of gap between the spring and the top hat.
How much did it cost for you guys to get exhaust mods? I have a 04 530i
Got an E30 crack free dash and e30 late front valence - very straight.
-01 Princess car (M5)
-91 Mtech II Rescue car (325iC)
-06 Activity Beast (4.8iS)
also have an E39 M5 front lower control arm , ill check which one and which side if someone is interested.
-01 Princess car (M5)
-91 Mtech II Rescue car (325iC)
-06 Activity Beast (4.8iS)
E30 fitment 15x7? has tires but no good, refinished with a wire brush and metallic grey paint.. text/pm me for pictures.
-01 Princess car (M5)
-91 Mtech II Rescue car (325iC)
-06 Activity Beast (4.8iS)
What happened to A&A? It looks like a used car lot now...
^I thought the same thing the other week I saw the place. How the hell could it have closed?
E30 Crack free dash and also Very straight late model front valence, i think its black.
-01 Princess car (M5)
-91 Mtech II Rescue car (325iC)
-06 Activity Beast (4.8iS)
Mahalos for this thread. Lots of great info!
stock 97 Z3 rims, 16x7, out here on Maui..
all 4 rims nearly perfect with no rash, 2 decent Michelins as well.
Question guys:
My 08 e60 has the MIL light on due to p0171 OBD II scan. It's either a dirty MAF, or faulty O2 sensor.
Since Hawaii doesn't do emissions check, will it pass safety inspection if that's the only thing wrong? The car itself runs fine, there isn't any lag or rough idling.
My Dashcommand app cannot clear the error. :/
Thanks.
Brand new to the group, just registered today. I've been in Hawaii since 2008, been going to Honolulu Bimmer for all services (until a recent incident).
My M-Ask (CD Player) died in my 2005 525i and I plan on ordering a replacement and installing it myself. I'm pretty sure it will need to be coded/recoded once installed and I don't mind paying dealership prices but I would rather save a few dollars it possible. Any suggestions where I can take it to be coded/recoded?
Happy Spring 2015 on this beautiful Aloha Friday.
Pick any pair of springs for $ 100, from left to right...
- Eibach / /GC 8" x 2.5" x 380 Lbs, used
- Eibach / GC 6" x 2.5" x 300 Lbs, used
- Ireland Engineering 7" x 2.5" x 300 Lbs, used
- SPW 6" x 2.5 x 300 Lbs, used
- H&R 7.5" x 2.5" x 171 Lbs, new
- H&R 3.5" x 2.5" x 171 Lbs, new
springs etc.jpgEibach 8"x380lbs & 6"x300lbs.jpgIE 7" 300 lbs SPW 6" 300 Lbs.jpgH&R's 171 lbs.jpg
Does anyone need coupe OEM E36 M3 mirrors? They are Schwarz in colour
Best place for brake fluid flush?
I have an '87 325 and I need to get the A/C working again and I would like to get the rust dealt with too, so I can start replacing seals. Oh to have a dry trunk and non-humid vehicle. I was hoping to get some recommendations on where to go. I live in Pearl City and don't mind taking a drive if it means fast and quality service. I appreciate any helpful suggestions.
Mike's AC on Dillingham Blvd.
He is the best, IMO.
recommendations on shops to replace battery on a 2016 528xi? As an alternative to dealer servicing... Honolulu... Thanks!
Get an AGM battery and you can do it yourself. Get a Foxwell NT510 to register the battery and it'll pay for itself from Day 1.
Bookmarks