Will have my rs285's shortly, but for now here is a small teaser...
These are rs212's
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
this is like heaven in your living room!
Last edited by 336motorsports; 03-22-2012 at 10:02 AM. Reason: Automerged Doublepost
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
Dude, wait til you see what I create over the next few months, dbk 198's, staggered 212's, 17x9.5/17x10.5 300's, might do a set with high offsets for wide rubber, and I may even do a double staggered set of rfs, I've got a BUNCH of parts and many many ideas brewing!
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
me too... loooooove 18" RS's
TRM Coilovers 670F/895R | BBS LM | Corsa RSC36
I must admit to not liking the genuine 18s. The lips just look weird to me, esp. on the E36. I've seen them work on some cars... older cars, E28 for one, or on some Audis... there they work. On the E36 the lips are a bit meh.
But still baller due to rare-status.
I like the way your car looks in your signature! Very clean.
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
You sir are my hero
Nice collection.
And I actually dig the wood panels in your house. I'd go with hardwood floors and furnish everything in wood and/or steel though.
WTB: E36 ZKW Headlights, ACS Rear Diffuser,E36 M mudflaps front + rear
nice sets of wheels!
i dont have enough space in my living room for my 40+ sets
*** For sale: euro stuff, BBS steering wheels, smoked tail lights, bunch of rare wheels (5x120 and 4x100) ***
My cars:
- E28 Alpina B9 3,5 #575
- E30 320i cabrio
- Volkswagen 3BG Passat wagon
E30 touring with euro S50 built:
http://www.facebook.com/pages/Projec...47809901983011
where did you get that jazz photo i used to have the same one. well my mother did.
an that s54 thats nice too
i just had a question. you guys seem knowledgeable. with people seeling sleeves for engine
blocks couldent you really bore an engine to almost any diameter you wanted?
with the proper sleeves?
Last edited by BL Dozier; 11-06-2011 at 02:57 PM.
If you EVER come across a set OR EVEN ONE BBS RSII Vavle stem (the screw in hide away kind) PLEASE LET ME KNOW IF YOU CAN SELL!!! I have a set of 18" ones that I cant run because my tire guy STRIPPED the hide away valve stem... I am running the adapters (the screw on adapters that you have to use to put air in them)on the other 3 and they are sealed up nicely...
BUT apparently the hide aways are available NO WHERE!! They also need refinishing so if I can ever get what I need to seal them up I'll get em to ya!
I'm in SC near Greenville so not that far away even!!
Last edited by ANDERSONCELL; 11-06-2011 at 04:08 PM.
"The only right way to do something is the other guy's way"
you need a nasa crawler bmw to fit all those wheels on.
'95 Avus Blue M3|Dinan tune|Cosmos V1 CAI|Recaro|3.23 lsd|Magnaflow| -SOLD
'95 Cosmos M3 |Cosmos Racing V1 3.5" CAI|Samco rep TB boot|740i HFM|Turner Tune|UUC Pulleys|CF Hood|Depo 6000k|Depo french fogs|Depo Tails|Black Wide Kidney Grill|AA exhaust|Zimmerman Drilled rotors|Sparco|B&M SSK|Koni S&S|BMP Bushings|Wahlbro 255|Stewart Thermostat| 240whp -SOLD
'09 135i 6mt |BMS JB4 g5iso| MHD BMS Flash| BMS DCI| BMS Chargepipe | BMS Inlets| RB PCV| N54 Perf 3" DP| Wagner FMIC| Ryan Racing DV Valves| Fuel it Stage 2| e60| 480whp
No because a lot of BMW engines will very quickly become one giant cylinder if you bore them out. A lot of M engines just do not have the physical space neccesary to be bored out, the cylinders are very close to eachother as it is
Boring it out then sleeving it will net you no benefit when you cant actually sleeve to an amount any wider than stock size. On the straight 6s there may be a fraction of a liter available but it is not worth it regarding time/cost/benefit
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
Last edited by BL Dozier; 11-06-2011 at 05:38 PM. Reason: Automerged Doublepost
Even Mxx engines wont give you too much room to bore. Thats a big reason why boring/stroking isnt huge in the bmw community. Unlike American engines, BMW engines are more than holes cut in giant pieces of steel with cylinders put in place.
Going into my TENTH YEAR of providing high quality reproduction BMW fabrics!
PRICE CUT on ALL FABRICS
Offering the best prices on the best quality reproduction fabrics!
what kind of 4x100 wheels do you have?
'83 320i in the works
Check purems.com, I know they have the adapters, is that what you need? If not, pm me. I think my friend may have some spare parts.Originally Posted by ANDERSONCELL
Id be glad to refinish your wheels.
Nothing at the moment, other than a bunch of mini Cooper wheels. I may get a set of rs001's this winter to refinish.Originally Posted by mdschurtz
Last edited by 336motorsports; 11-06-2011 at 09:35 PM. Reason: Automerged Doublepost
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
Bookmarks