Ive searched far and wide for hubcentric rings that will fit my SSR comps with no success.
Ive found a set for $100 bucks but thats crazy.
I need the hubcentric rings to be 72.56-79.5 for a set of SSR comps (type's c's or SSF's) whatever you call em.
Also, just to double check, can anyone confirm that the CB on my SSR comps is actually 79.5 mm? Thanks!
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
I just googled "hub centric rings". The first site that came up has them: http://www.justforwheels.com/index.j...cat=hubcentric
Google the size and you'll find out that Tirerack has them for $5 each:
http://www.1addicts.com/forums/showp...81&postcount=3
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
I just ordered a couple of sets from Tire Rack using their phone number: 1-877-522-8473. I bought two sets and the total shipped was $36.xx. And I had looked and looked and Googled for a couple of weeks. Thanks guys
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
PM/email me for some of the cleanest and safest redrills money can buy.
info@ewheelworks.com
I can also powder coat, polish, and plate for a very competitive price.
ewheelworks.com
You have to be careful with the centering rings. They are made specific for a wheel and the car. Just knowing the size is not good enough.
P726 SE 79.5-72.6 PLASTIC RING 1.50 If I can help let me know.
or
AL726 MM 79.5-72.6 CENTER RING 2.50
and
RCLIP RETAINING CLIP FOR AL RING .50
Bookmarks