Wokke chip install. Lost instructions. HELP

[Marvis43]

I am ready to install wokke chips but misplaced the install instructions. Can someone help me out can't find them anywhere.

[simchief]

Here is link provided by WOKKE:
My install went well, EML chip required soldering in a socket.

http://www.wokke.de/Chiptuning/Chip_Installation.htm

Good luck.

[olinjohnston]

When splitting the circuit boards, be PATIENT. They are finicky.

[wokke]

.....
My install went well, EML chip required soldering in a socket.
......

never heard or read that before. So your original chip was soldered in?

When splitting the circuit boards, be PATIENT. They are finicky.

Using a hairdryer to warm up the connector side is a good trick. Makes it a hell of a lot easier.

[velocity89]

How much hp does the chip make for the engine vs stock

[wokke]

How much hp does the chip make for the engine vs stock

about 10%. More important though is the highly improved throttle response.

[simchief]

Wokke: I was surprised to find EML chip hard soldered to PCB. local computer repair shop will handle adding a chip socket. Could it be part of 1992-93 C-specifications, as this is an original Canadian car, it had DINAN chips when I opened DME's, they were dated 1991. Car has 81,000 km on it. It still had Canadian coins in the coin tray when I bought it.

[wokke]

Wokke: I was surprised to find EML chip hard soldered to PCB. local computer repair shop will handle adding a chip socket. Could it be part of 1992-93 C-specifications, as this is an original Canadian car, it had DINAN chips when I opened DME's, they were dated 1991. Car has 81,000 km on it. It still had Canadian coins in the coin tray when I bought it.

I quite honestly have no clue why the chip is soldered in your EML box.