yup....Is that rear window out of a toyota ?
Painting the cage as we speak, so needless to say I'm running it. if it ever makes it to fd, which I'm much more likely to put it into a wall before I get that far, then we'll see. chopping out and redoing wouldn't be too bad (it's hard enough as it is knowing how much better I could do now that I've learned what I have while doing it the first time round) ....but at this point, I'm just trying to get this thing done :d
By no doubt in my mind, I trust the cage to keep me safe tho......
so all this imput on cage but none on sequential vs bank fire injection??????
Last edited by imaiami; 03-03-2011 at 07:58 PM.
Subbed cant wait to see it finished
Dude, your nuts. Nuff said haha. Your M was sexy though.
Props, this is a badass project
thanks for the compliments sirs...
and the confirmation of batch injection....I suppose once the motor is running at a decent rpm, the fuel atomization and what not will still occur.
It just seems as if some cylinders will be robbed of fuel while others are rich since I'll only be reading the a/f mixture of all the cylinders combined....
after further reading it appears as if this motor and the m30 runs batch stock anyway.....
da love knucks for ya. can't wait to use em again once this thing is running.
sick build.
look forward to seeing it complete!
Last edited by MauiM3Mania; 04-09-2011 at 06:17 PM. Reason: profanity
here is a bit more recent motivational/insperational stuff for ya: http://jalopnik.com/#!5782213/is-thi...ickup-for-real
I wanna see some paint already damn it!!
Ya just like everybody is saying batch is totally fine, the only thing that will suffer compared to sequential is idle and economy which i highly doubt your to worried about for this build
Rat rod truck build is sick, looking forward to coming back to AZ and putting together my next project with ya!!!
We'll also be sure to get that thing boosted while i'm there...
this thing is bad ass i started to help a friend convert a s13 to a truck a long time ago and they look sick!!!
Thanks as always......
me too , workin on itI wanna see some paint already damn it!!
Rad, motivation is much needed these days.......here is a bit more recent motivational/insperational stuff for ya: http://jalopnik.com/#!5782213/is-thi...ickup-for-real
Been missin ya. Boosted ya say hmmmmmmYa just like everybody is saying batch is totally fine, the only thing that will suffer compared to sequential is idle and economy which i highly doubt your to worried about for this build
Rat rod truck build is sick, looking forward to coming back to AZ and putting together my next project with ya!!!
We'll also be sure to get that thing boosted while i'm there...
get the Brewed side of the build cookin...
hopefully I'll get some crackin going here soon with some perty pics to follow....
moving sucks.
this is totally sick!! And dont worry everyone hits the wall if they say they dont they are a lair
shooot, if you aren't hitting walls then you just aren't pushing hard enough, well tapping at least :d
got some more paint, but not on the outside for a while til I get it running and back to Elevens' for the one coloredness outside
red for the cage, also added a jack point in the center of the car to make things easier
and a nice blue inside, paint courtesy of Elevens' Paint and Fiber.......Soon to be the whole thing
put a few pieces on for her for a trailer trip home to get wired up and vroomin back to the shop
Last edited by imaiami; 09-29-2011 at 07:59 PM.
Coming together very nice
badass
Last edited by MauiM3Mania; 03-26-2011 at 07:34 PM. Reason: profanity
Yes!
niiice!! what is the seat thats in the car now?
awesome build!!!
Cool build, we plan to build our e30 drift truck at some point this year.
My only realy question is why u chose a s38b35 as the powerplant? While it's a cool motor in it's own respect, it doesn't have that much power potential NA, unless you have DEEP pockets. FI is difficult to run and even more costly. Just thinking that an m/s50/2 with a turbo or supercharger would've been a better investment.
How much did you pay for the motor?
www.facebook.com/Undr8dEmpireLlc Instagram: @UNDR8D_EMPIRE
Scarlet V2 - #Project333Ti - http://www.bimmerforums.com/forum/sh...(-Project333Ti)
have you decided what color yet?.
Bookmarks