Just had a batch of brackets made. Does anyone need a new A/C bracket that fits the M10 engine. The bracket was modeled from an original clardy bracket and was mocked up on a straight 2002 & tii block. It's put together and welded in a steel jig for quality control. All of the rubber bushings have been deleted so no more worn out bushings to replace down the road. Also the bracket size has been reduced along with the weight so you don’t have to remove the bracket to replace a water pump like the older York bracket.
If you are ready to start that A/C project You will need one of these brackets. I will include the size of washers nuts & bolts you will need to finish the install. I just wanted to let you know the price of the Bracket is now 92.00 + 10.00 shipping + 3.50 paypal total $105.50 in the lower 48.
Had this bracket powder coated it turned out real nice
Contact me at dave.hobiedave@gmail.com Take a look at my album for the install. http://s335.photobucket.com/albums/m...2/AC%20system/
Last edited by Hobie Dave; 03-06-2011 at 11:36 PM.
If you are interested in Putting in A/C or modernized your A/C in your 2002. I have the perfect bracket modeled after the original Clardy Rotary bracket. It fits all models even tii. I have made some improvements on the original design by deleted the rubber bushings that needed replacing every other year also made it smaller and lighter. No pulley needed because the compressor acts as the tensioner for the v-belt. These are all new brackets and adjusting arms and spacers included along with all the bolt sizes you will need.
would like one of these brackets for my m10 e21 call me at 336 831 4432. thanks dave at carr industries greensboro nc
Does anyone have any information on the availability of a Clardy Rotary bracket? Its getting hot and my York Brick died!
Help!
Thanks. :-)
wondering here as well
1973 2002
Front & rear sway bars
Engine bay strut bar
Oil breather oil catch can
Weber 38/38 carb conversion
Polished aluminum valve cover
Battery relocated to trunk with remote cut off switch
Steel headers
Enkie 16" mag wheels
Installed oil pressure, voltmeter & vacuum gages in middle console
Pertronic distributor ignition
Custom aluminum vent and window door cranks
Drier's seat RamSkin 1" custom fit sheepskin cover
Modern Panasonic CD,Bluetooth radio.
Nardi wood steering wheel
Custom dash cover
Added passenger side BMW flag mirror
Y'all go over to bmw2002faq.com. That's where Dave, and everyone else is!
;-)
are these brackets still available?
if so, what make and brand of the ac compressor?
Bookmarks