Results 1 to 2 of 2

Thread: Clardy A/C brackets

  1. #1
    Join Date
    Apr 2008
    Location
    Orlando, Fla
    Posts
    326
    My Cars
    04/330i 00/M5 72/02

    Clardy A/C brackets

    Just had a batch of brackets made. Does anyone need a new A/C bracket that fits the M10 engine. The bracket was modeled from an original clardy bracket and was mocked up on a straight 2002 & tii block. It's put together and welded in a steel jig for quality control. All of the rubber bushings have been deleted so no more worn out bushings to replace down the road. Also the bracket size has been reduced along with the weight so you don’t have to remove the bracket to replace a water pump like the older York bracket.




    If you are ready to start that A/C project You will need one of these brackets. I will include the size of washers nuts & bolts you will need to finish the install. I just wanted to let you know the price of the Bracket is now 92.00 + 10.00 shipping + 3.50 paypal total $105.50 in the lower 48.

    Had this bracket powder coated it turned out real nice

    Contact me at dave.hobiedave@gmail.com Take a look at my album for the install. http://s335.photobucket.com/albums/m...2/AC%20system/
    Last edited by Hobie Dave; 03-07-2011 at 12:36 AM.

    http://www.bmw2002registry.com/about.jsp
    If you are interested in Putting in A/C or modernized your A/C in your 2002. I have the perfect bracket modeled after the original Clardy Rotary bracket. It fits all models even tii. I have made some improvements on the original design by deleted the rubber bushings that needed replacing every other year also made it smaller and lighter. No pulley needed because the compressor acts as the tensioner for the v-belt. These are all new brackets and adjusting arms and spacers included along with all the bolt sizes you will need.

  2. #2
    Join Date
    Jan 2006
    Location
    kernersville, north carolina
    Posts
    5
    My Cars
    83 320 85 325e 91 325ix
    would like one of these brackets for my m10 e21 call me at 336 831 4432. thanks dave at carr industries greensboro nc

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •