Hello boys,
I've bought a china clone cable Inpa k + Dcan with software.
When I install the ediabas application I select English and switch the English Language in Tool32 option, but NCS don't work only in english, but english + dutch.
The buttons are in dutch and the content of menù are in english.
The version is 3.1.0
In the tutorial that I've seen NCS is ALL in english
What should I do to have NCS all in English ?
Thanks
Best Regards
P.
i have the same issue ,, i thought it's like that ,,, let me know if u found a solution
I hope that we found a solution
Someone help us
Well, boys...
Its well known the the cracked software that COMES WITH the interfaces are JUNK.
Id start by DL a real working version.
95 840Ci, Calypso Red/Silver, 83k - 99 740i, Black/Black, 185k, Alpina Mods - 01 740i, Titanium/Silver, 40k, Sport Pkg
Complete Turnkey Diagnostic/Programming systems available...PM for details.
http://www.8Coupe.com - Please register, spot, and help the project.
Thanks IcemanBHE for info !
Can you give us more help for download a real working version of software, please ?
In the interface's guide it's written that I must use only the software provided with interface otherwise hardware will be bad ! It's true ?
Thanks for help
Regards
P.
I don't really think there will be any problem using different software ,, the cable that I have did not come with software at all since it is serial port cable and it doesn't require any drivers ,, I'm using NCS 3.10 which I downloaded from somwhere here but still ,, most of the info shows in german ..
Drop this file into NCSEXPER/CFGDAT and it will be in english.
Thanks
I've tried: the buttons are now in english, but menù is in dutch. Look the picture:
Can I have the menù in english ?
In your opinion, I need to download another version of software because the SW that comes with HW are bad ?
My cable is usb and need ftdi driver, maybe it's different ?Originally Posted by ehssan78
Last edited by paskuale; 01-26-2011 at 08:36 AM.
just wondering ,, does anyone knows how to change the NCS-EXPERTENTOOL name from the NCS window
Hi!
My NCS already has the "NCSEXPER.TXT " file ( exactly the same), but even so i changed by this one, but the buttons still in german.
How can I change the language?
Regards
J.B.
Where I found this Config File?
ncsexpert/cfgdat/inpa.ini
I was having same problem this worked for me:
http://obdtool-co-uk-review.blogspot...as-ncs_20.html
This seems to be no longer a working link.
This hack worked for me.
https://www.e90post.com/forums/showthread.php?t=832476
NCS Expert 4.0.1 is now entirely in English. I tested it on Windows 10 64-bit version 1903. When you launch ncsexpert.exe, you do get a Windows prompt saying "The app you're trying to install isn't a Microsoft-verified app", but you can turn that nag off in Settings.
Need a DME or EGS update?
https://forum.e46fanatics.com/showthread.php?t=1081716
Coding 530i after AT->MT Swap
https://www.bimmerforums.com/forum/s...ter-AT-MT-Swap
Bookmarks