Yea, unfortunately all my searching before buying didnt yield any results that told me that, until I specfically searched that specific topic AFTER I tried to install it without the risers. Anyway, I was able to modify the rear deck to accept the top half without the risers. I studded top deck and am using teflon lined lock nuts to keep it secure. Even though I guess it wasnt designed to run without the risers, everything lines up perfectly. Not sure why MASHAW would have done this??? It would have been easy to just make this to run in either position, which I would have thought was the hole point in having removable risers
Here it is without the risers:
Doesnt get as much attention (mostly unwanted) like this but the risers will be going back on for an HPDE event im running in April and I'll probably just keep them on since it is a small PITA to keep swapping, but at least now I know I can if I want to.
does anyone know of a way to mount this without drilling holes? im borrowing my friends and i just want to get it on but dont want to put holes in my trunk so when i give it back my trunk isnt left with 4 unnecessary holes.
Any interest in a Group Buy?
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
^^What's your price?...I'd really like to upgrade to a CF High rise...
here's mine...from 'planet Jeep' on egay. $40 shipped. I have noticed some cracking near on edge near the trunk...but it hasn't gotten any bigger (1")
http://forums.bimmerforums.com/forum....php?t=1494281
I still need to have the trunk/wing painted professionally...I keep thinking about ditching it so I haven't pulled the trigger. Want risers too.
Last edited by Moron95M3; 04-01-2011 at 09:27 AM.
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
IG @Bsaintmedia | Cammed LS6 Swapped E36 M3 "The GMW M3"
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
IG @Bsaintmedia | Cammed LS6 Swapped E36 M3 "The GMW M3"
Looks like we can do it for $599 for the 4pc high version and $499 for the 2pc low version.
Shipping is $60-$80 US
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
It's a go.
E-mail me or PM me to be added to the list.
Shipping will be 4-6 weeks.
Again, our wings are made of hard Polyurethane, not fibreglass, thus no sagging.
Even the carbon fibre wing is made of fibreglass with a thin layer of carbon fibre.
Last edited by BMWE34M5; 04-01-2011 at 11:51 AM.
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
that triple mcWing with Cheese is a lil too derp for my tastes.
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
interested in wing, need to get my next paycheck first :-)
1998 M3 Hellrot - Full suspension coming soon :-)
1991 318i - Sold
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
I've been looking for a rear spoiler and have been having terrible luck finding one for a sedan - I know you state yours fits the sedans - do you have any pictures of fitment on a sedan?
I have a cf ltw replica, with the cf trunk.
I cant find any pics of the back, but here are a few other pics
BMWE34M5:
Whats the high version of this wing weigh in at?
Also are the mounting points on the OEM pattern or are they different?
Thanks,
Elliott
6 kg (13 lbs 3 oz) for low version and 7 kg (15 lbs 6 oz) for high version
More info here:
http://forums.bimmerforums.com/forum....php?t=1630745
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
Mel Abrahams
Abrahams Motorsport
Buy with confidence, serving the BMW community for over 14 years.
Website: www.abrahamsmotorsport.com
E-Mail: sales@abrahamsmotorsport.com
PayPal: order@abrahamsmotorsport.com
Phone (727) 992-0288
Bookmarks