Thanks for help I really appreciate it! Please take a look only when you really have time for it.
just a few more of my spoiler, taken from a higher up 'standing height'. Due to the curve of the top foil, it does show a slight bit of curve from this angle,but it's not enough for me to consider it an eye sore, if you look at it from a lower point of view, like dead on level height, it looks totally straight as my previous pictures showed.
TRM Coilovers 670F/895R | BBS LM | Corsa RSC36
I think its just not as noticeable with the risers. Looks good though!
Last edited by Eightba11; 05-15-2019 at 11:55 AM.
So boys it looks like Lester is no longer in business so another source has to be found for great looking rep wings.
So I managed to find an oem top part of the gt spoiler but it is from a sedan.
It has no sag and looks really good, should I buy it?
I can use the base from the Poland spoiler. It should technically fit the base because the Poland spoiler fits sedan and coupes as advertised.
Last edited by Eightba11; 07-23-2019 at 12:27 PM.
Woah thats good news!!! Thanks man luckily I went for it the second it was posted. I didn't know if it was gonna fit but its a risk I would take because I already have 3 sagging spoilers at home lol
Id say at worst you may need to adjust the mounting holes on the base, as they may not be spaced identically to OEM, but should be able to make it work with some sanding, and maybe some re drilling.
Thing with the base is that there are plenty of it on e-bay so Im not that worried about that. I would probably buy a new base because there are already holes from the previous installation which probably won't match up with the oem top part of the spoiler.
Last edited by Eightba11; 07-24-2019 at 10:16 AM.
Planning to fit this oem top part of spoiler to the replica lower part. Desperate times call for desperate measures.
Last edited by Eightba11; 08-03-2019 at 05:26 PM.
There is no way in hell that is going to look good at all.
IG @Bsaintmedia | Cammed LS6 Swapped E36 M3 "The GMW M3"
Sand the insides, add material to the outside. Hell there's plenty of people on IG that build their whole cars out of bondo, a little on the base can work.
Body filler + paint and it'll look normal I guess. Even at its current state I think it still looks way better than a saggy low rise spoiler.
Last edited by H2oiamwater; 08-09-2019 at 07:22 PM.
https://www.carid.com/d2s/ltw-style-...QaArFVEALw_wcB
Has anyone looked into these? Im guessing they either get to a body shop near you and get painted or they paint on order....? Figured there cheap not great blah blah blah but havent seen anyone mention it in this thread.
I would get one from Mashaw or Abraham Motorsports but they won't ship to me.
How about this one? Ive seen pics of it without and with risers
Looks like it will sag if using lowrise
This looks promising based on the pics and the description
https://www.ebay.com/itm/BMW-3-E36-G...item59325c865a
or this
https://www.ebay.com/itm/Carbon-Fibe...sAAOSwzgJbo0Km
Last edited by Eightba11; 08-14-2019 at 09:21 AM.
How does this look? Its a hamann spoiler which is suppose to have no sag
The description said those are the actual photos of the spoiler. But anyways before buying I would ask for more pics.
the second carbon fiber one has pics with copyright watermark, seems legit. I contacted the seller to request for pics he said ok but later. i think hes forgotten about it.
Bookmarks