The definitive E36 LTW Spoiler Replica Thread

[m3j0n]

The sedan kit (which is different from the coupe kit) has been discontinued for quite a while. However you can piece it together with the exception of the clear adhesive protection strips of which I believe one is discontinued.

51 71 2 268 555 Protection foil right which I believe is discontinued.
51 71 2 268 556 Protection foil left which appears to still be available.
You can buy your own double sided adhesive 3M tape.
07 11 9 915 031 (x4) Hex bolt with washer M6x20-Z3
07 11 9 900 678 (x2) Hex socket head screw with washer M6x20-Z1

If you buy the protection strip that is available you can probably have someone just mirror that for the other side or make you a new set etc....

BMW tightening specs is 9 Nm. So don't go "nuts" tightening those.

[Jim E.]

Remember the protectiove foils are not available in sets.

You can get new replica sets from jvit27 on this forum. He had them custom made.

See this thread: https://www.bimmerforums.com/forum/s...r-E36-spoilers

[Linnadawg]

I just ordered a replica from Daro Sport on eBay. He sent me a message asking if wanted abs or frp. I asked who manufactures them and he said they make the frp but doesn’t know who makes the abs. So I’m guessing he was trying to drop ship me a cheap abs unit and make a little on top?

[notMpowered]

ABS is probably the same shit Alibaba one that all the clout chasers on IG drop ship and claim that they are "the best replica available"

[Riff209]

Anybody know if MA Shaw is still producing? Been trying to get a hold of the guy through phone and email with no reply.

[notMpowered]

I know they have definitely been still making them until very recently and I've heard nothing about them stopping. I do know they are notoriously hard to get ahold of.