Page 6 of 6 FirstFirst 123456
Results 126 to 133 of 133

Thread: How to use WinKFP to update an ECU.

  1. #126
    Join Date
    Jun 2015
    Location
    Charlottesville, VA
    Posts
    5
    My Cars
    06 330XI
    Quote Originally Posted by BLooD30 View Post
    Screen grabs showing how to update an ECU with WinKFP.
    When I load up winKFP, I get to the last image here, where I need to choose the assembly number, but its blank. I can't figure this out, been working on it for days. I'm running Windows 8.1 x64 Please help.

  2. #127
    Join Date
    Mar 2015
    Location
    Slovakia
    Posts
    2
    My Cars
    BMW 320d E91 Lci
    Quote Originally Posted by alexs3d2 View Post
    Now I have a real problem: Apparently I run into the same trouble as NoQuarterX did: I tried updating the CCCA060 module and after about 7 hours it finally finished. But it then gave me two error messages:
    1. ERROR_ECU_SECURITY_ACCESS_DENIED__Security_Access_ Requested
    2. SIGNATURE (could not be chacked ro something similar).

    I am wondering if the problem was the battery... It is possible that if the battery was below a threashold, the ECU might deny any changes to its status (Normal vs. Programming ??) and it stays into Programming.

    Any ideas???
    Now I have simular problem, but with Combox,
    I have retrofited combox to my e91, and works perfect till I import 9C.


    BT and USB function was OK, but connected drive not works, so I decide to flash combox with winKFP.


    before I updated car with ISTAP to daten 58, but I cant update combox, because my car is 2009, so I chose winKFP.


    I used ZB 9257165 acording INPA, flashing start and goes smooth till 100%


    Than i got error:
    switching programming mode failed 00CBX36_10, DIAGNOSE_MODE (ECUPM): ERROR_ECU_SECURITY_ACCESS_DENIED

    as well as
    Flash download failed 00CBX36_10, FLASH_SCHREIBEN (...): ERROR_DLL_SEND_SEGMENT



    Im using ICOM ABC clone, which works perfect with ISTAP and other tools.
    Power supply 50A on 14.3V.
    tried 3 times - same results.
    I hope is just some wrong setup of WinKFP communication.
    what am I doing wrong?

  3. #128
    Join Date
    Mar 2015
    Location
    Slovakia
    Posts
    2
    My Cars
    BMW 320d E91 Lci
    OK, i got it. Problem was that I forgot to change to REMOTE:MOST_ASYNC_ab625.
    now is OK

  4. #129
    Join Date
    Aug 2015
    Location
    Mexico
    Posts
    10
    My Cars
    BMW 335i
    Hi,
    Yesterday I started with updates to my e90 335i 2007.
    I update the JBBF to a new update, I see incremental number and date (from 2007 to 2016) on ZUSB module.
    Then I updated the MSD80 module (DME), and instead of see incremental in ZUSB number and date, they decrease, I mean, I downgrade the module to a old one. (from 2010 to 2007).
    Now the car start, but fails iintermittently in revs. I don't have alarms in dash, ISTA or DIS, everything OK.

    I have the SP Daten E89 V41 installed in winkfp, maybe I need SP Daten mor new like V51 or V53?

    TIA.

  5. #130
    Join Date
    Dec 2016
    Location
    Tirana,Albania
    Posts
    1
    My Cars
    BMW 523i
    Hello dear si i have one bmw e61 523i and i flash the msv70 with the 525i zusb number is any one to help me for 523i 2006-2007 zusb number for original data becouse i have problem with vvt

    Sent from my GRACE using Tapatalk

  6. #131
    Join Date
    Nov 2010
    Location
    Egypt
    Posts
    1
    My Cars
    bmw 325 coupe
    hello i am having problem flashing my ecu,its e82 n55 dct,
    i cannot find mev17 or my zusub number in the winkfp ecu list,how to fix that ?
    if i looked into the directory of the data file for winkfp i see mevd17 but i dont see my ecu in winkfp!
    i tried few sp daten above v53 and updated them through bmw coding tool but still cant solve it.
    i should be running 8647154 according to the chart,anyone can help me please ?

    Thanks.

  7. #132
    Join Date
    Sep 2010
    Location
    Estonia
    Posts
    148
    My Cars
    2000 BMW 740i
    The old number is 8647154, the new zusb is 8684956

  8. #133
    Join Date
    Aug 2015
    Location
    netherlands
    Posts
    3
    My Cars
    1999 BMW 323i (E46)
    guys, help.
    I've tried to update my MS43 ECU (E46 330i 2002) but I keep getting error 2020.
    I already tried changing my COM settings but that didn't help (and I don't remember the correct original settings).
    when i turn the key and directly try, it takes longer to get the 202 error ... the car doesn't start anymore since.
    winkfp 5.3.1 and updated it with bmw tools spdaten updater.
    all files are from => bimmergeeks.net/downloads (16-02-2019)
    Last edited by laandennis; 02-16-2019 at 11:55 AM.

Page 6 of 6 FirstFirst 123456

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •