Page 4 of 4 FirstFirst 1234
Results 76 to 85 of 85

Thread: How to use WinKFP for programming

  1. #76
    Join Date
    Jun 2016
    Location
    kuala lumpur ,malaysia
    Posts
    2
    My Cars
    bmw e46 saloon

    Dme programming / updating

    Quote Originally Posted by BLooD30 View Post
    Don`t know but this comes up progman and ISTA/p.
    DME can be programmed for 12 time,after that need to replace or virginised

  2. #77
    Join Date
    Jan 2005
    Location
    YYZ / ORD
    Posts
    3,787
    My Cars
    '02 E39 M5 | '09 335i
    Does anyone know the euro ZB# that doesn't check the Secondary Air System on the 545i's N62 DME?

    '09 335i - Alpine white + Coral Red | '02 M5 - Imola Red + Imola Red
    Gone, but never forgotten:
    '04 E55 AMG Brilliant Silver / Anthracite .. '96 318i Alpine White / Black .. '01 330Ci Titanium Silver / Coral Red .. '96 328i Jet Black / Black

  3. #78
    Join Date
    Jun 2008
    Location
    Halifax, Nova Scotia, Can
    Posts
    211
    My Cars
    2004 E60 545i
    OK, have a Winkfp question used it for first time yesterday to flash my vin to my 2007 TCU I just replaced my original 2003 version with that came with the car to get full BT Phone capability.


    So when Winkfp rewrites the VIN what else happens ??


    Thanks
    Last edited by cmyachtie; 12-08-2016 at 06:59 PM. Reason: Moved to sep. thread
    ">'85 Mlite E30, '98 E36, 1998 528i, 5 spd manual, black on black, sold in 2012 and still going past 350Kkms, now MYSTIC Blue 2004 545i, 6 spd Steptr., Adaptive steering and Xenons, Anti dazzle mirrors. Aux+Belt-Chime+Dig speedo+iDrive discl. 2007 TCU+BT Coded+Sure BT Board

  4. #79
    Join Date
    Jul 2008
    Location
    Clinton, CT
    Posts
    21
    My Cars
    E61 530xiT
    Old thread, but thought I'd ask about changing an ECU to a different family. In section "7.2.2 Function: Programming Update" of the WinKFP Handbook (in the DOKU folder) it states,

    The function button is activated only following successful input of the job data by means of the
    "Update ZUSB" function in the programming settings phase of Comfort mode.
    This function button starts updating of a control unit to the latest assembly identification. Updating to
    an incompatible hardware release by means of BSU (boot sector update) is also borne in mind.
    For this purpose, the vehicle identification number and the assembly identification number are read
    out of the last UIF entry in the control unit.
    In addition to this assembly identification number, the latest (current) assembly identification number
    is read from the file \<root>\data\<ecufam>\<ecufam>.his (= ZUSB history). A switch to a different
    ECU family and therefore to a new, corresponding ZUSB history is possible.


    This tells me I cannot swap to a different ECU family using Enter ZUSB or Choose ZUSB. I need to use Update ZUSB and ensure I have the configuration selected to activate the Boot Sector Update. I edited the .HIS file in the current family by adding a line to indicate my current ZUSB has a newer version, that being the ZUSB I want to flash. I also edited the .HIS file in the desired ECU family by adding the same line. Lastly I added my Hardware Number to the .HWH file in the desired ECU family.
    Selecting either current or desired ECU family during Update ZUSB doesn't get me anywhere. The resulting dialog box shows my current ZUSB will be overwritten by the same ZUSB.
    There must be more than just editing the .HIS and .HWH files... maybe location within the file matters?

  5. #80
    Join Date
    Sep 2010
    Location
    Estonia
    Posts
    148
    My Cars
    2000 BMW 740i
    Does somebody know, how to deal with COAPI errors 4211, 4206, 1040, 3017? WinKFP version is 5.1.0.0 and the corrupt file is NPV.DAT
    What to do?

  6. #81
    Join Date
    Jul 2004
    Location
    Houston, TX
    Posts
    12,459
    My Cars
    36 Cylinders
    open the npv.dat file with WordPad and save it. It fixes the npv.dat issues.
    -Abel

    - E36 328is ~210-220whp: Lots of Mods.
    - 2000 Z3: Many Mods.
    - 2003 VW Jetta TDI Manual 47-50mpg
    - 1999 S52 Estoril M Coupe
    - 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
    - 2019 M2 Competition, self-tuned, 504whp
    - 2016 Mini Cooper S

  7. #82
    Join Date
    Sep 2010
    Location
    Estonia
    Posts
    148
    My Cars
    2000 BMW 740i
    Thank a lot 328 Power 04!! (What an odd username)

  8. #83
    Join Date
    Jul 2004
    Location
    Houston, TX
    Posts
    12,459
    My Cars
    36 Cylinders
    LOL. I was young, and it was made in 2004. I keep on meaning to change it.
    -Abel

    - E36 328is ~210-220whp: Lots of Mods.
    - 2000 Z3: Many Mods.
    - 2003 VW Jetta TDI Manual 47-50mpg
    - 1999 S52 Estoril M Coupe
    - 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
    - 2019 M2 Competition, self-tuned, 504whp
    - 2016 Mini Cooper S

  9. #84
    Join Date
    Jul 2014
    Location
    Berkeley, CA
    Posts
    5
    My Cars
    2009 535i Wagon
    Quote Originally Posted by 328 Power 04 View Post
    LOL. I was young, and it was made in 2004. I keep on meaning to change it.
    I have a very quick basic question about WinKFP usage. What does it mean when it shows the Assembly# and Hardware# as shown in the picture? From what I have seen over the internet, this means that the software version I have is greater than the available one, how can this be possible? I am using the latest daten files V65 for my E60 LCI

    thanks
    Attached Images Attached Images

  10. #85
    Join Date
    Dec 2013
    Location
    paris
    Posts
    1
    My Cars
    e60 530d
    Thanks for informations

Page 4 of 4 FirstFirst 1234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •