Page 2 of 3 FirstFirst 123 LastLast
Results 26 to 50 of 58

Thread: M50 Manifold Kits - Preformed Silicone Hose

  1. #26
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Quote Originally Posted by cmzwirner View Post
    Ordered one about 2 weeks ago. I was told that they were backordered. Are they shipping now?
    Yes. Slowly but surely digging out of the backlog of orders I have.

    -E


    Quote Originally Posted by timmyfresh View Post
    sweet good to know about the tb plate, thanks eric. i have all the needed equipment to do the tapped sensor part it's the tb that concerned me. i hope i'm not clogging up the thread but if you could just answer one last question for me it would be great. do i maintain my factory obdII tb along with the asc system with the modification? i'm like 80% sure i can but i wanted to know for sure.
    after this i'll be purchasing the kit as soon as i get rid of some parts from the parts car.
    Yes keep your OBDII TB. No need to replace it. You may do what you wish with your ASC TB. I chose to remove mine.

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  2. #27
    Join Date
    Aug 2010
    Location
    NY/FL
    Posts
    2,725
    My Cars
    '08 G35S, '98 M3/4/5
    How far back is the backorder?
    Infiniti G35S Turbo BMW M3/4/5 Ninja ZX6R 636
    Penn State University '08...better than your school since 1855
    Sigma Lambda Beta International Fraternity Incorporated

    UTI Class of '10, BMW "STEPchild"
    Acurazine.com Mod Squad

  3. #28
    Join Date
    Jul 2006
    Location
    mission viejo, Cali
    Posts
    200
    My Cars
    328is
    yeah and how much for the kit pick up? im in socal and can meet you up

  4. #29
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Quote Originally Posted by Da Infammus 1 View Post
    How far back is the backorder?
    I am almost dug out of my march back order but I fear that my silicone manufacturer has screwed me again. there will be another back order into april.

    Quote Originally Posted by djplt2k1 View Post
    yeah and how much for the kit pick up? im in socal and can meet you up
    kit picked up is same price just no shipping of course. and I do Installs for $150.

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  5. #30
    Join Date
    Apr 2011
    Location
    Dayton, OH
    Posts
    43
    My Cars
    1997 BMW M3 Coupe
    Just ordered a blue kit.

  6. #31
    Join Date
    Jan 2010
    Location
    Boynton Beach, FL
    Posts
    1,633
    My Cars
    98 M Roadster
    How many kits do you have left? How about a kit #3?

  7. #32
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Quote Originally Posted by spacecowboy View Post
    How many kits do you have left? How about a kit #3?
    Now that I have gotten caught back up I stock everything ready to go except the used fuel rail covers. Those are going to be removed from my kit and replaced with the new covers. New covers are hella expensive...$115 at the dealer. I buy new covers from the dealer, modify them and sell them for this application for $105.

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  8. #33
    Join Date
    Apr 2008
    Location
    Buffalo, NY
    Posts
    265
    My Cars
    '97 M3

    M50 mani kits

    Do you have more in stock? I would like a blue one if so. Thanks!
    "Whether you think you can or can't, you're right."

  9. #34
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Quote Originally Posted by stackcheese View Post
    Do you have more in stock? I would like a blue one if so. Thanks!
    I order 10 blue, 5 red and 25 black every month. Blue and red were popular in april so I'm out. All I have are a couple blacks left. Next order comes one May 13th.

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  10. #35
    Join Date
    May 2005
    Location
    MA
    Posts
    1,495
    My Cars
    99 Estoril M3, 90 325is $2006 GRM, 99 Jeep XJ
    Good job Eric. I've been following your work for years and you've always been around here to answer questions.

    I bought my kit from a different vendor (a LOT more expensive) just before I found your early kit. This new kit looks awesome and I would go with it if I didn't already have an M50 on my M3.

    Good luck.

  11. #36
    Join Date
    Aug 2009
    Location
    Hollywood, CA
    Posts
    302
    My Cars
    E34 Touring
    just placed an order!

  12. #37
    Join Date
    May 2008
    Location
    Irvine, CA
    Posts
    482
    My Cars
    e36 323is
    This kit looks great. Does the M50 mani swap mess with smog at all? CA smog is pretty touchy.


  13. #38
    Join Date
    Feb 2010
    Location
    Hanover Park, IL U.S.
    Posts
    196
    My Cars
    TSX, M3, RDX
    Ordered my kit on Sunday 05/15 with the black hose.
    Last edited by PARZ M3; 05-21-2011 at 05:06 PM.

  14. #39
    Join Date
    Oct 2009
    Location
    plattsburgh ny
    Posts
    110
    My Cars
    e36 328i
    Interested in ordering one but willl I get it by the end of the week?

  15. #40
    Join Date
    Feb 2010
    Location
    Anthem, AZ
    Posts
    5
    My Cars
    1999 cosmos m3
    Bought this kit along with a friend and have had it on for about a month, first start and the car went right to idle perfectly. Great kit and I would definitely recommend. Great communication too, every question I asked was answered!

  16. #41
    Join Date
    Aug 2009
    Location
    Hollywood, CA
    Posts
    302
    My Cars
    E34 Touring
    Got my kit yesterday. Should be doing the swap this week! Excited

  17. #42
    Join Date
    Apr 2005
    Location
    Rigel 7
    Posts
    8,711
    My Cars
    M3, 850i, E30T, E55T
    Finally ordered...nervous/anxious/excited to do the swap.

  18. #43
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Hi all. Glad you are enjoying your kits and getting them installed without too much difficulty.

    To those of you that experienced a couple weeks in delay in receiving your kit recently, I apologize. Normally I get the kits shipped within just a couple days of processing the order.

    About CA smog. I know this is going to sound like a sales pitch but it's true...your car will pass smog better after using my kit and a M50 manifold. The reason is because right now as we speak your OE manifold and dried out crank vent and ICV seals are leaking. I see it all the time...and I live in SoCal.

    About the instructions...There is a section of instructions right in the front that are for expert installers...very basic to the point no hand holding...not sure why the other guy that said they were too detailed didn't find that. Also I am in the middle of a re-write to clean things up so I will thin them out and clarify some of the more common support type questions I get all the time.

    Take care guys/gals.

    -Eric
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  19. #44
    Join Date
    May 2008
    Location
    Irvine, CA
    Posts
    482
    My Cars
    e36 323is
    Thanks for the info


  20. #45
    Join Date
    Apr 2005
    Location
    Rigel 7
    Posts
    8,711
    My Cars
    M3, 850i, E30T, E55T
    Sounds good Eric. Any estimation on when the new instructions will be available? I might as well wait until then to install. Thanks

  21. #46
    Join Date
    Dec 2010
    Location
    Ashland/Lebanon Or
    Posts
    96
    My Cars
    1996 328i
    just put my order in

  22. #47
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    New instructions will be available next week. You will have the option to download both sets, new and old.

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  23. #48
    Join Date
    May 2009
    Location
    pittsford, NY
    Posts
    817
    My Cars
    97 M3(sold), E30 M3
    got the kit installed it and i ran into one little problem but eric helped me fix it very quickly. I would recommend this kit for anyone because of the very simple instructions
    Last edited by jaajavon; 08-01-2011 at 10:41 PM.

  24. #49
    Join Date
    Aug 2006
    Location
    King George, Va
    Posts
    537
    My Cars
    1986 528e
    Just ordered one for my '96 M i picked up on Fri. First mod.


    1986 528e M20B25 Swap


    crop2 by justinmdougherty, on Flickr

  25. #50
    Join Date
    Jun 2012
    Location
    Brazil
    Posts
    11
    My Cars
    1996 328i sedan
    Long time since last post.. still have them? if so, can you ship international?

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •