Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
How far back is the backorder?
Infiniti G35S Turbo BMW M3/4/5 Ninja ZX6R 636
Penn State University '08...better than your school since 1855
Sigma Lambda Beta International Fraternity Incorporated
UTI Class of '10, BMW "STEPchild"
Acurazine.com Mod Squad
yeah and how much for the kit pick up? im in socal and can meet you up
I am almost dug out of my march back order but I fear that my silicone manufacturer has screwed me again. there will be another back order into april.
kit picked up is same price just no shipping of course. and I do Installs for $150.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Just ordered a blue kit.
How many kits do you have left? How about a kit #3?
Now that I have gotten caught back up I stock everything ready to go except the used fuel rail covers. Those are going to be removed from my kit and replaced with the new covers. New covers are hella expensive...$115 at the dealer. I buy new covers from the dealer, modify them and sell them for this application for $105.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Do you have more in stock? I would like a blue one if so. Thanks!
"Whether you think you can or can't, you're right."
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Good job Eric. I've been following your work for years and you've always been around here to answer questions.
I bought my kit from a different vendor (a LOT more expensive) just before I found your early kit. This new kit looks awesome and I would go with it if I didn't already have an M50 on my M3.
Good luck.
just placed an order!
This kit looks great. Does the M50 mani swap mess with smog at all? CA smog is pretty touchy.
Ordered my kit on Sunday 05/15 with the black hose.
Last edited by PARZ M3; 05-21-2011 at 05:06 PM.
Interested in ordering one but willl I get it by the end of the week?
Bought this kit along with a friend and have had it on for about a month, first start and the car went right to idle perfectly. Great kit and I would definitely recommend. Great communication too, every question I asked was answered!
Got my kit yesterday. Should be doing the swap this week! Excited
Finally ordered...nervous/anxious/excited to do the swap.
Hi all. Glad you are enjoying your kits and getting them installed without too much difficulty.
To those of you that experienced a couple weeks in delay in receiving your kit recently, I apologize. Normally I get the kits shipped within just a couple days of processing the order.
About CA smog. I know this is going to sound like a sales pitch but it's true...your car will pass smog better after using my kit and a M50 manifold. The reason is because right now as we speak your OE manifold and dried out crank vent and ICV seals are leaking. I see it all the time...and I live in SoCal.
About the instructions...There is a section of instructions right in the front that are for expert installers...very basic to the point no hand holding...not sure why the other guy that said they were too detailed didn't find that. Also I am in the middle of a re-write to clean things up so I will thin them out and clarify some of the more common support type questions I get all the time.
Take care guys/gals.
-Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Thanks for the info
Sounds good Eric. Any estimation on when the new instructions will be available? I might as well wait until then to install. Thanks
just put my order in
New instructions will be available next week. You will have the option to download both sets, new and old.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
got the kit installed it and i ran into one little problem but eric helped me fix it very quickly. I would recommend this kit for anyone because of the very simple instructions
Last edited by jaajavon; 08-01-2011 at 10:41 PM.
Just ordered one for my '96 M i picked up on Fri. First mod.
Long time since last post.. still have them? if so, can you ship international?
Bookmarks