Well it was a bit of a puzzle..
For me the 6.4.3 and 6.4.7 files didn´t work, but I found a version of Ediabas in the Carsoft folder which works.
@Maikel:
I was wondering Maikel where you are standing right now? Ie what cables you´re using now?
Anyone know how I can get Inpa EA-90X to read in english?And I get loads of error messages when I run diagnostics.Any help greatly appreciated.
Is the EA-90X the newer one? Where can I obtain this may I ask?Originally Posted by paulb34
I just got progman v41 i think it was. A guy bought a OPPS head from ebay and they gave him gt1 v57 and the SSS... I already had the gt1 setup but never had the SSS... its huge, 3 dvd's took about 12 hrs do unzip... turned out to be a 39gb file. dont know how to share it but if someone could give a walk through on the how to share such a retareded large file, i'd seed till 100%. havent programed a car.. i have access to ISTA/P at work so no need to use the older SSS.
clint
Dear Maikel and friends,
I have some questions about the installation order:
What should I install first? In what order?
I have a Accer laptop with Windows Vista 64 bit and will have to use a USB/RS232 adapter cable.
Best regards,
Markus - BMW E32 750iL
Brazil
bimmerforumsOriginally Posted by eddyydd123
So,
After checking this forum again, i found that there are still files not working.....
What files are missing are not working, i don't get it, everytime i tried to reupload something, it's nog working...
And i'm not the biggest expert in all these programs. I got it running after a while, only for one time only..... And now my laptop has crashed and i'm trying to find out if it is possible to run it without VMWare on a Linux based computer for GT1/DIS
|For all your EasyDis and GT1 Carsoft and INPA software click here, now also for Windows 7 64bit!|
so what files did you find that are not working?
I don't fully understand your statement. are you saying that files are missing?Originally Posted by MaikelK
a little off topic, but does anyone know the status of ecubb.bmwecu.org letting people register (or handing out invitations)? I understand the premise behind keeping it a closed forum but was wondering how someone gets an invite without knowing anyone on the forum?
Hi There
Thank you for setting this up for us all to use, Do you have the password for VMWare. I have download it but I need the password.
Thank you
BMW I Own
E24 1983 635csi Race Car Build (Schnitzer Replica) http://bigcoupe.com/phpBB2/viewtopic.php?t=21792
E24 633csi 4 Speed Manual
E24 635csi /// 1986 4 Speed Auto
E24 635csi /// 1986 Getrag Manual
E23 735i 1986 *** 4 Speed Auto
My Business
https://www.facebook.com/pages/BMWre...68407960016698
DIY E24 Dash Removal
http://bigcoupe.com/phpBB2/viewtopic.php?t=20630&start=0&postdays=0&postorder =asc&highlight=
has anybody got NCS expert to work on windows 64 bit yet ?
Yes I can confirm password bimmerforums is not working anymore
new password anyone?
bimmerforums still works my end
Tried "bimmerforums" password today worked on some files but not all I got halfway through "easydis gt1 en" and now it don't work anymore oh well...
Hi All,
I have recently been trying to install this software, however yet again have come to a stand still. MaikelK, in using your files supplied on the website online, I am now stuck on downloading the ProgmanV32 disc 2.part36.rar
When I go to extract all of the parts it becomes stuck on this, and in looking on your 4shared area, I cannot find part36 anywhere? What I am struggling to think is, how have people mentioned this to be working with parts missing?
Does Disc 2 finish at part 36? Or does it continue further on possibly up to 40 or so? please could you sort this or use an additional file sharing website and reupload them?
If anyone has any information at all please get back to me :/!
Nick
I uploaded all the files already 2 times now, and it seems that it's not accepting the files or what so ever!! I don't recall where i downloaded everything, but you probably can find it yourself.
At this moment i just gave up on getting it to work properly on my laptop. I think it work's the best on an old laptop!
Sorry to not be able to help you guys out
Okay, so i am now repacking the files, and started uploading.
I set it to the same size as the previous files, so you can try it from part 36, otherwise, you have to download everything again...!
Last edited by MaikelK; 05-10-2012 at 03:22 PM. Reason: Automerged Doublepost
|For all your EasyDis and GT1 Carsoft and INPA software click here, now also for Windows 7 64bit!|
FYI, I downloaded disc 2 and unpacked it fine.
- 98 Titanium Silver M3 Coupe
Very good! I saw that the data limit was upgraded to 15gb! Do must be okay now!
|For all your EasyDis and GT1 Carsoft and INPA software click here, now also for Windows 7 64bit!|
Hey, I just wanted to say that everything worked 100% for me, just had to be patient and read the instructions very carefully.
Win7/64 system
Thank you for all of your effort in putting this material together.
A few notes:
In Windows 7, completely diable UAC or you will not be able to map the VMware machine's drive to the host system.
Also, in addition to modifying the Winlogon shell pointer to explorer.exe, it is necessary to change Autorun behavior for the optical drive. This can be done by modifying:
Software/Microsoft/Windows/CurrentVersion/Policies/Explorer/"NoDriveTypeAutoRun"
Change the value from (Decimal) 255 to 128.
This will allow VMWare Tools to be installed when the command is sent.
cheers,
tbw
Last edited by blndweasel; 05-25-2012 at 04:51 PM. Reason: Automerged Doublepost
Very nice that it worked out fine for you, not only for me haha
|For all your EasyDis and GT1 Carsoft and INPA software click here, now also for Windows 7 64bit!|
Bookmarks