I guess I stand corrected. Neither the M30 car nor the M60 one have a 50-amp that I've heard of or been able to find.
The 535i's was an 80 amp that lives near the battery. A previous post by Weisebar says that's where the 50 amp one is. Could someone clarify?
To prove some you wrong, a 9/93 540i M60 has two fusible links. One that is attached to the body right next to the battery(80amp), and another in a smaller power cable (looks like 8gauge) that runs together to the front with the main power cable. Its the 50amp fusible link that is hidden under the heatshrink wrap.
Performance Tuning and EWS Delete for MSS52/MSS54/MSS54HP/MS41/MS42/MS43/ME7.2/M5.2
Virgnize DME service available to unlock DME to sync to another vehicle on EWS3 vehicles 98+. M5.2.1, M7.2, MS42, MS43, MS45, ME9.2 and more.
Easiest way to contact me is to send me a message on my facebook page "DUDMD Tuning"
these are the ones on the E32 735
http://www.bimmerboard.com/members/kazam/735i%20FL.JPG
http://www.bimmerboard.com/members/kazam/P1010075.JPG
http://www.bimmerboard.com/members/kazam/P1010076.JPG
and if you have problems with electronics on the E32, better ask at our E32 forum, we have with E32FAN a super expert in E32 electronics.
Shogun tricks and tips for the E32 series are HERE!
Performance Tuning and EWS Delete for MSS52/MSS54/MSS54HP/MS41/MS42/MS43/ME7.2/M5.2
Virgnize DME service available to unlock DME to sync to another vehicle on EWS3 vehicles 98+. M5.2.1, M7.2, MS42, MS43, MS45, ME9.2 and more.
Easiest way to contact me is to send me a message on my facebook page "DUDMD Tuning"
Mine was under the carpet. I extended the wires and installed one of these next to the battery. You can get them from stereo shops. They are for high amperage loads.
Last edited by 540Greg; 10-09-2010 at 01:45 AM.
Look at the first pic for length wise from the positive terminal of the battery. I dont' think that the carpet needs to be pulled up a little in the rear or not. My brother and I were tearing apart the interior of the parts car today real quick, so I wasn't even paying attention. When we were about to pull the cable out i found the fusible link and remembered your thread, so i snapped the pics.
Performance Tuning and EWS Delete for MSS52/MSS54/MSS54HP/MS41/MS42/MS43/ME7.2/M5.2
Virgnize DME service available to unlock DME to sync to another vehicle on EWS3 vehicles 98+. M5.2.1, M7.2, MS42, MS43, MS45, ME9.2 and more.
Easiest way to contact me is to send me a message on my facebook page "DUDMD Tuning"
Mine was a lot further from the battery terminal. It was in the middle of the floor of the back seat.
Thanks Guys... I'll check it out
we had one E31 850 owner here in Japan who almost gave up his car after 6 months of trouble when the engine suddenly did not start or stop, then after 1-2 hours or sometimes after days it was running as if nothing happened. We told him to check the fusible link. He replied that he did and it would be fine. Till finally he found the second one. The fusible link had a hair crack which sometimes still worked.
He already had wasted $ into a new ignition switch, 2 new ignition coils, 2 new CPS etc, it was just a problem of a small fusible link with haircracks.
Here they are on the E31 http://www.bimmerforums.com/forum/sh...s-Look-at-Pics
E34 http://gallery.nccbmwcca.org/data/50...m/GEDC0014.JPG
Last edited by shogun; 04-17-2018 at 09:21 PM.
Shogun tricks and tips for the E32 series are HERE!
I've not read the entire thread to see if you've elaborated on your symptoms but will share that I've seen a few E34s(both tourings coincidentally) with corroded wire bundles under the rear seat, driver's side. There is a large junction of perhaps thirty power wires there in a big bundle that just lays on the floor waiting for any moisture that may get in. Unwrap it and look for the telltale green corrosion.
Oh, re fusible link replacements. E39s and probably all later BMs have high (80 & 100) amp replaceable fuses in a junction box above the battery. They have lug terminals with the same spacing as the fusible link in our cars. A couple of small screws and nuts, one of these and you are back in business.
Last edited by ross1; 08-23-2015 at 12:25 PM.
If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower. - Mark Donohue
Some e34 had a black box that the fusible was in that you could replace next to the battery, while others came with the fusible link that was not replaceable. You can the non replaceable one from another car that has the black box.
Andy
Now on my website, see Photos and locations of E32 fusible links under Reference data>>> Data - Electrical,
Excerpt:
FUSIBLE LINKS A & B IN E32
X6400 is the power post inside the E box. It feeds only DME loads.
Page 1361-01 for M30 and 1367-00 for M70. Fusible Link A is 50 Amps.
Page 0670-10 rear power distribution box Fusible B is 80 Amps. It feeds all the Rear Power Box loads
pic of Fusible Link A
pic: Fusible Link A is under the heatshrink
pic Fusible Link B with cover closed. Just squeeze the cover to open.
pic Fusible Link B with cover open.
pic Fusible Link B Fusible Link A
Edit: is there anyone here on the forum who can repair swords for others for a fee? I just got a PM from someone asking for that.
Last edited by shogun; 11-03-2015 at 06:33 PM.
Shogun tricks and tips for the E32 series are HERE!
And here fusible links from a 11/93 E32 750iL, the one in shrink plastic, then there is another 80A one in a plastic box behind the battery, can also be seen, just removed that from a crashed parts E32 750iL we disassembled.
fusible1193.jpgfusible1193.jpg
Shogun tricks and tips for the E32 series are HERE!
to finalize this for the E34, just use the ETM, let's say a 1995 produced from 5/1994 - 12/1995, covering E34 525i, 525it, 530i, 530it, 540i , no need to run thru all the 527 pages, check the index under F, there you see
fusible link F0 ......page 0670.2-00
fusible link F97.....page 0670.2-00
That comes directly after the fuse chart.
F97 is the inline (riveted on) fuse from the battery to the e-box/front power distribution box, B+ jumpstart junction point
F0 is shown as 80A fusible link, 10RT, between X18068 and X18067, goes to rear power distribution box
http://shark.armchair.mb.ca/~dave/BMW/e34/e34_95.pdf
Shogun tricks and tips for the E32 series are HERE!
In case anyone has new pics, pls post them here with year/month of production of the E34, engine type and if battery is located in engine bay or under seat. Also pics of defective fusible links are welcome.
Shogun tricks and tips for the E32 series are HERE!
vehicles produced 9/1992 - 8/1993, 525i, 525it, 535, M5 E34
The red cable powering the e-box components from B+ distributor X6449. See page 0670.2-02. That car has per the drawing only one fusible link 80A to rear power distribution box, see page 0670.2-07
http://shark.armchair.mb.ca/~dave/BMW/e34/e34_93.pdf
Shogun tricks and tips for the E32 series are HERE!
im trying to locate the f97 fusible link off the battery and the B+ distributor (X7163) on a 95 525ti, im not too familiar with this model and the wiring diagrams are not much help with the locations of things. any help would be appreciated e34wire.jpg
Sections 7000 and 7100 show component locations, while 8000 shows splice locations. In this case... the diagrams neglect F97 and are wrong about X7163 being M60-only. The fusible links are just downstream of the positive battery terminal, while X7163 is a splice inside component X6449... which is also neglected. Yeah, there are some screwups in the ETM. The B+ distributor is located just in front of the heater valve, inboard of the fusebox, has a large hexagonal terminal and should have a black plastic cover with a red + on it. The correct name in the diagrams is G6430.
EDIT: as I look at it further, the diagrams are just flat-out wrong about power distribution on a 525i. On my 1/94 525iT, the positive battery terminal has three wires, two big and one colossal. One of the smaller ones goes to the rear power box, the other goes below the carpet by the starboard rocker into the E-box (opposite the fusebox, containing the DME and ABS/ASC module). The huge one also goes under the carpet, then behind the HVAC manifold, through the firewall near the heater pipes, to the B+ post. At that post, there's a less-huge wire to the starter power terminal, and from there to the alternator. It's more like the described M60 setup, actually.
Last edited by moroza; 06-18-2021 at 08:06 PM.
I merged this question with the E34 fusible links thread to have all info in one thread
Last edited by shogun; 06-18-2021 at 08:52 PM.
Shogun tricks and tips for the E32 series are HERE!
Bookmarks