Benny -- If you are still around I have a question. Why is it not advisable to connect both tweeter and woofer wires of from component crossover to the terminals of a co-axial speaker? Would this not ultimately send full signal to the coaxial speaker?

Thanks

Quote Originally Posted by Benny Z View Post
can't delete the factory amp and keep any of the factory speakers. just cut the wires at the amp's harness... you will just be cutting two pairs of wires (each pair is twisted together).

brown w/ orange stripe (right rear speaker negative)
blue w/ black stripe (right rear speaker positive)

yellow w/ black stripe (left rear speaker positive)
brown w/ orange stripe (left rear speaker negative)