E36 M3 Splitters for Stock Bumper Lip

[gearheadsteve11]

Lowered the price! $85.00 plus shipping

Here is the Ebay Link: http://cgi.ebay.com/ebaymotors/ws/eB...m=280573390121

This is a splitter for a BMW E36 M3. It fits under the stock lip on the front bumper for a 1 ¼” reveal. It is made of 1/8” thick Black ABS Plastic with a crinkle finish on one side and smooth finish on the other. This sale is for 1 splitter and 13 self-tapping screws to secure the splitter to the bottom of the lip. This sale DOES NOT include the bumper, lip, or any other part of the car.

Please feel free to leave any questions and I will get back to you with an answer as soon as possible.

Also, I make these by hand, and would be willing to make custom splitters with full undertrays for racing applications or for aftermarket lips. Please leave me a message, and we can talk.

I’m currently located in Spokane, WA. If you would like to pick up one up locally that would be fine.

-Steve-

[SneauxM3]

How does it work with an MM underpanel?

[gearheadsteve11]

The back side of the splitter will fit the back of the Stock Lip contour. So as long as you still have the stock lip, it will fit great. If you can get me a good pic of the underpanel, I can be sure, but from the pics I could find on the google, it shouldn't be a problem.

Here's a pic I found: http://vorshlag.smugmug.com/photos/6...54_ZhbYs-L.jpg

-Steve-

[SneauxM3]

Doesn't look bad, tempts me to grab a flat piece of metal to lay up some extra carbon weave I have packaged up.

What's the bfc deal, shipped.

[gearheadsteve11]

SneauxM3, you have a message.

[gearheadsteve11]

Bump for updated price.

[gearheadsteve11]

Still for sale