This part worked on my car before hand, but I wanted to video it working before I mailed it off to another forum member.
So if I wanted this thing to work, which wires do I supply 12v with to make it work?
My guess is red for positive and green for ground. But brown is also ground and looks to have a resistor between it and the green wire.
Any ideas?
Anyone?
Last edited by dano670; 08-10-2010 at 12:00 PM. Reason: Automerged Doublepost
See if you can follow the BK/RD, BK/WT, BK/YL, and BR wires, or at least check where those wires attach to the motor (lower right in pic).
Thanks for the schematics. I went for it.
Red to positive and green to ground. Watch your fingers!
Bimmer forums coming through with the exact diagram i needed!
Thank you much
Bookmarks