Results 1 to 4 of 4

Thread: Park Brake Fault / DSC Module

  1. #1
    Join Date
    Jun 2010
    Location
    Baltimore, MD
    Posts
    1
    My Cars
    2002 BMW 745IL

    Park Brake Fault / DSC Module

    Does anyone, kow what are the steps are to reset the Park Brake Fault warning light, after I replace my DSC Module with the repair kit?

  2. #2
    Join Date
    Nov 2009
    Location
    Beckley, WV
    Posts
    11
    My Cars
    BMW 745Li, Avalanche

    DSC repair

    I have had an ABS light on and the dealer said I must replace the ABS/DSC module. I found one on Ebay. it is on the way. But I have been told I must take to dealer to have it programmed in for my car to recognize it. was your ABS light on? Both the parking brake and ABS lights are on in my car. but the parking brake works fine.

  3. #3
    Join Date
    Apr 2019
    Location
    Saipan, CNMI
    Posts
    2
    My Cars
    2013 BMW X5 xdrive35i
    I've got the same Park Brake Fault warning light.
    It's been going on and off when I soft reset the brake.
    Battery is running at 12.6v off and 13.6v while running.

    Need advise.

  4. #4
    Join Date
    Dec 2007
    Location
    Dallas, TX
    Posts
    10,384
    My Cars
    '93 850Ci- Daily Driver
    Electromechanical Parking Brake needs to be reset through INPA. I had to do this several times before it actually reset when I replaced the Parking Brake actuator in the trunk.
    '93 850Ci - Mineralweiß Metallic

    2001 740iL - Titansilber
    ALPINA B7 -Alpinweiß III


    ...the price of cool ain't cheap!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •