Hello everyone!
I was looking to download SSS and Progman, but there's files missing in 4shared.
As far as I've seen, files missing are:
ProgmanV32 disc 1.part001.rar
ProgmanV32 disc 1.part036.rar
ProgmanV32 disc 1.part049.rar
ProgmanV32 disc 1.part065.rar
ProgmanV32 disc 1.part071.rar
ProgmanV32 disc 2.part01.rar
ProgmanV32 disc 2.part03.rar
ProgmanV32 disc 2.part05.rar
ProgmanV32 disc 2.part07.rar
ProgmanV32 disc 2.part08.rar
ProgmanV32 disc 2.part09.rar
ProgmanV32 disc 2.part40.rar
ProgmanV32 disc 2.part42.rar
ProgmanV32 disc 2.part45.rar
easydis en gt1.part01.rar
easydis en gt1.part05.rar
easydis en gt1.part06.rar
easydis en gt1.part17.rar
This is the folder I'm downloading from:
https://www.4shared.com/dir/LfFoCBq2...s_Machine.html
with the bimmerforums password.
Could someone please re upload them? or are they somewhere else?
Thank you!
Last edited by DrgFnx; 08-16-2020 at 07:53 PM. Reason: Mispelling
Does anyone have progman 26-28?
Who can give a link of deskription, from where get a files : Open folder “copy files from this folder to C-EDIABAS-Ecu” and copy all files to folder C:\EDIABAS\Ecu;
Thank you
Is it possible to connect to the DME of a E46 when the car is in the ON position. Whenever I try to do a diagnostic on my car using an AUTOPHIX 5900 OBD2 scanner it says it's unable to connect to the DME
Could you please share the current link?
Hello guys! Can someone post a new link?
Hello All
My Progman cannot program because of voltage(13V) prevention. I read the problem can be solved with one of the changes pack SSS Full Start.iso/changesV32CrackFProgman.iso - can somebody help, I do not find it anywhere?
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
I have a big problem with coding an old X5 E53 DSC module - the car has removed automatic gearbox and air suspention and now works with manual gearbox and spring suspention. I used ZEKO to generate new ZCS without automatic gearbox and air suspention, the ZCS is successfully coded to the master modules(EWS and KMB), but now the DSC got "Coding error (23)" and doesn't work. I coded the DSC milion times with NCS Expert, GT1 DIS, Launch, but the error stays I wanted to use WinKFP, but I cannot find Sp Daten which includes ZUSB files for DSC57. The Progman is my last option, but it doesn,t work!
I will do appreciate any help for solving this problem.
Last edited by jorisimo; 02-09-2024 at 03:07 AM.
That DSC does not have flashing, so WinKFP and Progman will not help there.
It will definitely have to do with the coding, which can all be managed with NCS Expert. Progman and others are not any more special, they all use the same.
Zeko is not necessarily accurate in generating a ZCS from nothing.
Can you please post the original ZCS from the vehicle in a new thread here? Also post the content of the fsw_psw.trc file after doing codierdaten_lesen on DSC?
-Abel
- E36 328is ~210-220whp: Lots of Mods.
- 2000 Z3: Many Mods.
- 2003 VW Jetta TDI Manual 47-50mpg
- 1999 S52 Estoril M Coupe
- 2014 328d Wagon, self-tuned, 270hp/430ft-lbs
- 2019 M2 Competition, self-tuned, 504whp
- 2016 Mini Cooper S
Hey any update on this on how you solved this? I'm doing a 6MT swap on my E53 and can't code my 0265950067 DSC57 unit. I also ironically can't find the ECU Family DSC57 in Winkfp even if I wanted to use a different ZB.
Does anyone know what ZB would work for WINKFP flashing the DSC?
Frank Macaluso - BMW Drivetrain Transplanter
Frank Macaluso
http://www.garageaholic.build
BMW Engine Swaps
Current Swap 2016 LT1/6 into E24 6er
607-953-9587
Contact@garageaholic.build
Bookmarks