Hi guys
Reading through the requirements and instructions, i have one question. I already have INPA working perfectly. Do i need to install carsoft as well for the SSS to work?
Regards,
Mark
Hi again,
For what i experienced, no, just inpa!
regards
ViperRunner
The virtual disk is the first iso that is selected and installed when starting the installation process, right? Then when it asks for the second disk, that is the huge file of the V32 SSS progman, right?
How do you install each of the devices?
I tried VIPERRUNNERs upload with the modded vmdisk but no luck. Got all the way through, connected up to the car all good, once I selected E46 then it came with the connection error.
Going to try the long way around now using randomy method but got stuck at the installing devices bit.
Tried updating, but keeps coming back with can't install hardware etc..
Last edited by ipwn; 05-15-2010 at 01:50 PM.
Click "Install VMware Tools" under the "VM" menu and then go back to the Device Manager and update the Ethernet Controller and Video Controller drivers. The SCSI Controller disappears after after you update the ethernet and video drivers. VMware tools are never completely installed.
that's right! as stritarja said, you have to install the vmware tools to resolve that issues when happening!
best regards
The virtual disk is the one you download on:
Virtual Disk for the virtual machine, already with all the needed modifications and ready for PROGMAN installation
the compressed base31.vmdk file..
the progmanv32 has 2 dvd's.. one is the first that is asked to install and when asked for the second, you insert the second dvd iso..
best regards
Last edited by ViperRunner; 05-15-2010 at 09:06 PM. Reason: Automerged Doublepost
Need help please on regedit step....
How do I Open regedit????can anyone advise me about it???
- Open Regedit
- In the Registry Editor, Click File > Load Hive
- Browse to the file Z:\Windows\System32\Config\Software
- Give the hive a name like BASE31
- It will show up in the registry
Hi guys
Has anyone else used Viperrunner's version of the installation with success?
Is there anyone that can sell me copies of the SSS Progman DVD's? Our internet here in Puerto Rico isn't quite the best and it took me a very, very long time to download the files for the INPA/DIS setup and i don't want to imagine with the SSS Progman files. Would anyone be kind enough to sell me a set of copies of the SSS Progman? I can send payment via paypal immediately.
Regards,
Mark
Last edited by se93; 05-17-2010 at 07:49 PM. Reason: Automerged Doublepost
I've used the SSS Base he has uploaded, works fine.
i try to download it already 1 week
this guy looks like put a monster there ... i only hope it will work
Last edited by champaign777; 05-17-2010 at 11:42 PM.
Hi guys
This may sound a tad dumb, but what do i do with the VMware virtual disk file? Honestly, i have no idea and am stuck.
Any help will be appreciated.
Ok, i think i got it now. I see where the virtual disk file is used in the part where you map the virtual disk. Ok, i thought that this was used as the base install at the start of the process. So, with viperrunners instructions we start the installation directly with DVD #1 of the SSS Progman. Is this a correct assessment?
Thanks,
Mark
Last edited by se93; 05-18-2010 at 12:26 AM.
is it posible to instal that on Windows 7 ?
Hi guys
I do not know how to go about with the VMWare virtual disk. How do i use the VMware virtual disk to create a new virtual server and instead of creating a hard drive, point to that file to use as the hard drive image? Do i need to mount it somehow on daemon tools? I have never done this before and am stuck with this.
Any input will be appreciated.
Regards,
Mark
ViperRunners base works perfect. ( I got it from digital-kaos )
To the people having problem with VMWARE, read VMwares help files!
so ViperRunners how you run your vmdk file ?
under used physical device ? some advanced options like IDE::SCSI ? under use ISQ image ?
Edit:
Are you linked this file when created VM for PROGMAN first time ??
Edit:
I see , you linked it to VM ... ok
Edit
ok now i kind of stuck in OS ... the first disk dont want to start automatically ...
maybe this is VMware 7 problem ?
Is there any way to run progman1 disk manually ??
Last edited by champaign777; 05-20-2010 at 01:04 AM.
i tried resintalled uploaded DVD PROGMAN v32 from 3 different laptops and different VMware and cant start instalation
What are the sizes of these files ?
I have 2 files
PROGMAN320_1 2,471,520
PROGMAN320_1 4,547,264
what is the executable file ? i tried to run it manually from WinXP Embedded
This is just stack in first window :
PROGMAN320_1/install/install-Progman.bat
looks like I need to run a full version ...
Last edited by champaign777; 05-31-2010 at 03:23 PM.
Hi,
I have a problem please connect with SSS. I have the following equipment:
http://www.ecutool.com/productshow.a...ts=BMW%20Tools
What is the IP address of VMnet1?
What should be the IP address to a physical cable connection?
What can I enter in the box and the Gateway IP address in network settings in the program?
Thanks Zdenek
excellent post
Im trying to get SSS working in windows 7, ive got DIS up and running no problems. Ive got SSS installed but Im trying to use regedit to load the hive to edit it. I map the Z drive, and go into regedit, and it doesnt appear. If I open my computer, theres the Z drive, just doesnt show up when I browse for it from the load hive in regedit. I know windows 7 has a lot of security features and all, any idea?
Got this installed on an old slow laptop just fine.
I am trying to install it on a new faster laptop. I have the base installed, PROGMAN disc 1 and 2 went through the sequence. Then it reboots and just sits at the windows blue background before the login. I have let it sit for 8 hours today and it still hasn't booted. VMware shows HD activity but nothing. I have even given it 2GB of RAM.
Any ideas what could be wrong? SSS has yet to start up so I have not done the changes.iso yet. I changed the shell to explorer.exe and it boots fine. I even manually launched D:\Programme\IFS\shell\Progman.exe 80 /cipb/ProgmanAdmin/start.php?mode=init and it went. But when that line is the shell it never boots!
DIS boots fine in VMWare
Last edited by Ziuck; 06-03-2010 at 07:17 PM.
Bookmarks