Page 10 of 11 FirstFirst 1234567891011 LastLast
Results 226 to 250 of 272

Thread: ***New*** One Piece Silicone M50 Manifold Adaptor Hose

  1. #226
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    All current orders will be shipping out this saturday. There are quite a few.

    You will get an email at your paypal email addy when I print the label. If you don't get an email let me know asap. The order system is undergoing some modifications and things have been getting lost. I'm doing the best I can with all that is happening.


    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  2. #227
    Join Date
    Aug 2011
    Location
    WA
    Posts
    562
    My Cars
    '97 BMW M3/2/5
    Awesome sounds great Eric! Can't wait!

  3. #228
    Join Date
    Nov 2005
    Location
    SOCAL
    Posts
    413
    My Cars
    e36 325i 5MT, e36 M3 5MT
    I've been reading quite a bit about the M50 swap lately because I am currently rebuilding my S52.
    I got an M50 manifold from a junk yard, but I also picked up the fuel rail.
    Can't I also use the M50 fuel rail?
    www.mr5racing.com
    2001 BMW 330ci 5MT (Sold) -- 2003.5 BMW M3 6MT (Sold) -- 2007 BMW 335i 6MT [441 whp 483 wtq (not stock)] (Sold) -- 1994 BMW 325i 5MT [202 whp 178 wtq (not stock)] -- 1999 BMW M3 5MT [263 whp 233 wtq) (not stock)]


  4. #229
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Quote Originally Posted by Mr. 5 View Post
    I've been reading quite a bit about the M50 swap lately because I am currently rebuilding my S52.
    I got an M50 manifold from a junk yard, but I also picked up the fuel rail.
    Can't I also use the M50 fuel rail?
    I believe you can. as far as I know the only difference is that the M50 has the fuel pressure regulator on the fuel rail. the M52 has it remote mounted. I have never done it so not sure if there is difference but I believe I have heard of people using the M50 fuel rail quite often.

    If you do use the M50 fuel rail you will have no problem mounting it to the manifold (no brackets required) and no problem using the M50 fuel rail cover (don't have to cut down the mounts)...like we do with the 52 fuel rail.

    hope this helps.

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  5. #230
    Join Date
    Nov 2005
    Location
    SOCAL
    Posts
    413
    My Cars
    e36 325i 5MT, e36 M3 5MT
    Cool.
    This is good news. I'm just curious if people choose to use the S50 fuel regulator or the S52 regulator.


    Quote Originally Posted by E36M3E View Post
    I believe you can. as far as I know the only difference is that the M50 has the fuel pressure regulator on the fuel rail. the M52 has it remote mounted. I have never done it so not sure if there is difference but I believe I have heard of people using the M50 fuel rail quite often.

    If you do use the M50 fuel rail you will have no problem mounting it to the manifold (no brackets required) and no problem using the M50 fuel rail cover (don't have to cut down the mounts)...like we do with the 52 fuel rail.

    hope this helps.

    -E
    www.mr5racing.com
    2001 BMW 330ci 5MT (Sold) -- 2003.5 BMW M3 6MT (Sold) -- 2007 BMW 335i 6MT [441 whp 483 wtq (not stock)] (Sold) -- 1994 BMW 325i 5MT [202 whp 178 wtq (not stock)] -- 1999 BMW M3 5MT [263 whp 233 wtq) (not stock)]


  6. #231
    Join Date
    Mar 2009
    Location
    Norcal, CA
    Posts
    551
    My Cars
    98 cosmo m3
    The group buy is 155 shipped right ?

  7. #232
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    The original GB price is long over. New prices posted on my website.

    www.m50manifold.com

    Thanks.

    -Eric
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  8. #233
    Join Date
    Mar 2009
    Location
    Norcal, CA
    Posts
    551
    My Cars
    98 cosmo m3
    Quote Originally Posted by E36M3E View Post
    The original GB price is long over. New prices posted on my website.

    www.m50manifold.com

    Thanks.

    -Eric
    So the group buy in your sig is over ? Or is the gb the same price as your site?

  9. #234
    Join Date
    Mar 2013
    Location
    UK Coventry
    Posts
    1
    My Cars
    E46 328 M

    M50 Manifold !!!!! will this fit my E46

    Hi all I have a E46 328 Uk W plate which is a 2000 year, I keep reading about this M50 Manifold. Will this fit and make any difference with my E46 ????

  10. #235
    Join Date
    Mar 2012
    Location
    GROTON C.T.
    Posts
    88
    My Cars
    2008 tundra 1998 528I
    tried a few emails on your web site, are you still selling these?

  11. #236
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Quote Originally Posted by rangerbrown View Post
    tried a few emails on your web site, are you still selling these?

    Yep. Not sure why you're not gettin through. Whats up?

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  12. #237
    Join Date
    Mar 2012
    Location
    GROTON C.T.
    Posts
    88
    My Cars
    2008 tundra 1998 528I
    want to goahead and order this kit, in the next few months i plan to throw on vf supercharger kit, how well will this work with it, also tune wise who do i contact for this, its a 98 528 with single vanos

  13. #238
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Quote Originally Posted by rangerbrown View Post
    want to goahead and order this kit, in the next few months i plan to throw on vf supercharger kit, how well will this work with it, also tune wise who do i contact for this, its a 98 528 with single vanos
    Probably better to wait till you get the SC on there. If you go FI there isn't much reason to keep the cyclone seperator. I would keep it but most people get rid of it because its easier that way.

    The main reason to use my kit is if you want to keep all emissions and stay green...and to pass smog tests.

    I can sell you a kit no problem...but when you install the SC kit you will need to make some modifications to the silicone hose to make it work. No big deal really. Just might be an expense you could save.

    -E
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  14. #239
    Join Date
    Mar 2012
    Location
    GROTON C.T.
    Posts
    88
    My Cars
    2008 tundra 1998 528I
    shouldnt be a problem i was also looking at adding the 68.5 mm big bore th at thesame time.
    you will hear somthing from after the 15th. thanks for you help

  15. #240
    Join Date
    Nov 2012
    Location
    Lawrenceville, Ga
    Posts
    646
    My Cars
    1997 Estoril M3
    Your prices are insane and why are you charging $55 for shipping a two pound box?, if that. You make it hard for anyone trying to swap their manifold. And your kit isn't even that clean. If you want it clean and unobtrusive, you have to go with Evosport or Turner. Sad to see a small company ripping off other people and then come on the forums and do it too. Get real!!

  16. #241
    Join Date
    Jan 2011
    Location
    Northern CA
    Posts
    1,988
    My Cars
    1998 M3/4/5
    Quote Originally Posted by EstorilB View Post
    Your prices are insane and why are you charging $55 for shipping a two pound box?, if that. You make it hard for anyone trying to swap their manifold. And your kit isn't even that clean. If you want it clean and unobtrusive, you have to go with Evosport or Turner. Sad to see a small company ripping off other people and then come on the forums and do it too. Get real!!
    You must be looking at international shipping... I was quoted $15 to ship the $189 full kit (without manifold) to my zip code. Turner quoted $14.89 to ship their $264.95 kit to me.
    S54 swap DME flashing - $100
    S54 swap CAN interface board (for proper A/C & check engine light) - $275
    e36 SAP sim/secondary air pump simulator:
    $75 - standard or $170 - plug & play
    e36 post-cat O2 sims: $115 shipped, plug & play

  17. #242
    Join Date
    Sep 2012
    Location
    So FLA
    Posts
    141
    My Cars
    1997 Cosmo M3 Saloon
    Are these still being sold?

    Can I get estimate to be shipped to 33067

    Thanks,

  18. #243
    Join Date
    Apr 2005
    Location
    Florida and ATL
    Posts
    8,384
    My Cars
    1999 M3 and 1990 Jetta G
    is eric still selling these? I've sent two e-mails to his info email and haven't gotten a response.
    TRM Coilovers 670F/895R | BBS LM | Corsa RSC36

  19. #244
    Join Date
    Oct 2005
    Location
    North East PA
    Posts
    2,718
    My Cars
    1970 2002; 1998 E36
    Yes. Still selling lots of kits. Some email goes into my spam folder and some people have errors in their reply to email address and my replies fail. I try to get to all emails but I have been rather busy with other projects lately. Try me again. Or just order. Money talks. Lol.

    -e
    Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit

    ******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com

    '98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
    M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids.
    My Dyno HERE
    My Website:
    www.m50manifold.com
    My Email:
    info@m50manifold.com


  20. #245
    Join Date
    Apr 2005
    Location
    Florida and ATL
    Posts
    8,384
    My Cars
    1999 M3 and 1990 Jetta G
    Understood, I know this isn't your only gig.

    Well it was kind of sales related question regarding other things I should buy to make the swap as smooth and complete and reliable as possible. I just want to get it all done the first time and be done with it.

    I have money and it will probably go to you instead of your competitors, especially if my doubts/questions can be answered.

    E-mail resent.
    TRM Coilovers 670F/895R | BBS LM | Corsa RSC36

  21. #246
    Join Date
    Sep 2001
    Location
    somewhere on earth
    Posts
    2,697
    My Cars
    wish it was 1 of each
    will this hose kit work on a stock m50 engine? if so, what are the benefits? thanks.

  22. #247
    dancerst's Avatar
    dancerst is offline life is a dance... BMW CCA Member
    Join Date
    Oct 2010
    Location
    Virginia Beach, VA
    Posts
    482
    My Cars
    E36 SC,E31 840ci,740iL
    Quote Originally Posted by E36M3E View Post
    Yes. Still selling lots of kits. Some email goes into my spam folder and some people have errors in their reply to email address and my replies fail. I try to get to all emails but I have been rather busy with other projects lately. Try me again. Or just order. Money talks. Lol.

    -e
    I have ordered a kit, but still not having any reply from you.
    my email starts from dancer_st
    thanks.

  23. #248
    dancerst's Avatar
    dancerst is offline life is a dance... BMW CCA Member
    Join Date
    Oct 2010
    Location
    Virginia Beach, VA
    Posts
    482
    My Cars
    E36 SC,E31 840ci,740iL
    Got my kit, thank you!

  24. #249
    Join Date
    Nov 2003
    Location
    Rockville, MD
    Posts
    8,201
    My Cars
    1998 M3
    how long will it take to receive a kit? i need one asap

  25. #250
    Join Date
    Nov 2003
    Location
    Rockville, MD
    Posts
    8,201
    My Cars
    1998 M3
    I reached him, now patiently waiting for my kit.
    Last edited by tEckniks; 11-15-2013 at 09:01 AM.

Page 10 of 11 FirstFirst 1234567891011 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •