All current orders will be shipping out this saturday. There are quite a few.
You will get an email at your paypal email addy when I print the label. If you don't get an email let me know asap. The order system is undergoing some modifications and things have been getting lost. I'm doing the best I can with all that is happening.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Awesome sounds great Eric! Can't wait!
I've been reading quite a bit about the M50 swap lately because I am currently rebuilding my S52.
I got an M50 manifold from a junk yard, but I also picked up the fuel rail.
Can't I also use the M50 fuel rail?
www.mr5racing.com
2001 BMW 330ci 5MT (Sold) -- 2003.5 BMW M3 6MT (Sold) -- 2007 BMW 335i 6MT [441 whp 483 wtq (not stock)] (Sold) -- 1994 BMW 325i 5MT [202 whp 178 wtq (not stock)] -- 1999 BMW M3 5MT [263 whp 233 wtq) (not stock)]
I believe you can. as far as I know the only difference is that the M50 has the fuel pressure regulator on the fuel rail. the M52 has it remote mounted. I have never done it so not sure if there is difference but I believe I have heard of people using the M50 fuel rail quite often.
If you do use the M50 fuel rail you will have no problem mounting it to the manifold (no brackets required) and no problem using the M50 fuel rail cover (don't have to cut down the mounts)...like we do with the 52 fuel rail.
hope this helps.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
www.mr5racing.com
2001 BMW 330ci 5MT (Sold) -- 2003.5 BMW M3 6MT (Sold) -- 2007 BMW 335i 6MT [441 whp 483 wtq (not stock)] (Sold) -- 1994 BMW 325i 5MT [202 whp 178 wtq (not stock)] -- 1999 BMW M3 5MT [263 whp 233 wtq) (not stock)]
The group buy is 155 shipped right ?
The original GB price is long over. New prices posted on my website.
www.m50manifold.com
Thanks.
-Eric
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Hi all I have a E46 328 Uk W plate which is a 2000 year, I keep reading about this M50 Manifold. Will this fit and make any difference with my E46 ????
tried a few emails on your web site, are you still selling these?
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
want to goahead and order this kit, in the next few months i plan to throw on vf supercharger kit, how well will this work with it, also tune wise who do i contact for this, its a 98 528 with single vanos
Probably better to wait till you get the SC on there. If you go FI there isn't much reason to keep the cyclone seperator. I would keep it but most people get rid of it because its easier that way.
The main reason to use my kit is if you want to keep all emissions and stay green...and to pass smog tests.
I can sell you a kit no problem...but when you install the SC kit you will need to make some modifications to the silicone hose to make it work. No big deal really. Just might be an expense you could save.
-E
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
shouldnt be a problem i was also looking at adding the 68.5 mm big bore th at thesame time.
you will hear somthing from after the 15th. thanks for you help
Your prices are insane and why are you charging $55 for shipping a two pound box?, if that. You make it hard for anyone trying to swap their manifold. And your kit isn't even that clean. If you want it clean and unobtrusive, you have to go with Evosport or Turner. Sad to see a small company ripping off other people and then come on the forums and do it too. Get real!!
S54 swap DME flashing - $100
S54 swap CAN interface board (for proper A/C & check engine light) - $275
e36 SAP sim/secondary air pump simulator: $75 - standard or $170 - plug & play
e36 post-cat O2 sims: $115 shipped, plug & play
Are these still being sold?
Can I get estimate to be shipped to 33067
Thanks,
is eric still selling these? I've sent two e-mails to his info email and haven't gotten a response.
TRM Coilovers 670F/895R | BBS LM | Corsa RSC36
Yes. Still selling lots of kits. Some email goes into my spam folder and some people have errors in their reply to email address and my replies fail. I try to get to all emails but I have been rather busy with other projects lately. Try me again. Or just order. Money talks. Lol.
-e
Eric Paul Eviston - 1 Piece Silicone Hose M50 Manifold Conversion Kit
******M50 Manifold Install Trouble Shooting Guide Here: www.m50manifold.com
'98 M3/4 - ECIS CAI, S50 Manifold, Conforti Software, 16" Spal Puller, UUC Pulleys, Fan Delete, UUC Stage 2 Fly w/M5 Clutch, UUC Blacks w/TMEs, X-Brace, GC RTAB shims, GC RSMs,
M Roadster lever, 245x40x17 all 4 corners, Drilled Zimmermans, Motul RBF600 and Redline Synth fluids. My Dyno HERE
My Website: www.m50manifold.com
My Email: info@m50manifold.com
Understood, I know this isn't your only gig.
Well it was kind of sales related question regarding other things I should buy to make the swap as smooth and complete and reliable as possible. I just want to get it all done the first time and be done with it.
I have money and it will probably go to you instead of your competitors, especially if my doubts/questions can be answered.
E-mail resent.
TRM Coilovers 670F/895R | BBS LM | Corsa RSC36
will this hose kit work on a stock m50 engine? if so, what are the benefits? thanks.
Got my kit, thank you!
how long will it take to receive a kit? i need one asap
I reached him, now patiently waiting for my kit.
Last edited by tEckniks; 11-15-2013 at 09:01 AM.
Bookmarks